problem.
If required I can generate detailed logfiles...
Anyone any idea?
Kind Regards,
Remy Bohmer
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
s,
Remy
2007/1/30, Gregoire Favre <[EMAIL PROTECTED]>:
On Fri, Jan 12, 2007 at 12:53:03PM +0100, Remy Bohmer wrote:
> Hello,
>
> I have discovered a strange problem:
> I have a DVB-S system, with a VP1030 clone receiver card (Technisat Skystar
> 1 CI v3)
> Card works f
Hello All,
Several weeks ago we had a discussion on the linux-dvb mailinglist
about the Twinhan vp1030c clone cards and problems with Diseqc
switches which failed to switch between several LNBs. The conclusion
was that there was a lot of noise on the cable, more noise than
control signal for the S
Hello Marco,
> Can you please post the results of lspci -v concerning your card? Maybe
> mine has something different.
> Thank you.
>
> My lspci -v follows:
>
> 04:07.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
> Subsystem: Unknown device 5b2f:1081
> Flags: bu
Hello Andreas,
> > FYI: My TT- S2-3200 has subsystem ID: 13c2:1019
> Just for the record. My output of lspci -v:
>
> :01:05.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
>Subsystem: Technotrend Systemtechnik GmbH: Unknown device 1019
>Flags: bus master, mediu
Hello CityK,
I also had a lot of problems with the Technisat Skystar 1 CI series in the past.
There are different cards out there, ALL named Skystar 1 CI, with
different Firmware contents and can be recognised on the different
colors of the PCB, but all are distributed under the same name. The <
Hello Gregor,
Can you please give me the revision numbers?
These are listed somewhere on the boards.
As mentioned before, different revisions are different clones from
other boards en need a different driver configuration.
Besides, I do not know if all combinations of different revisions of
the bo
; /sbin/modprobe dst_ca; /sbin/modprobe
dvb-bt8xx
This line forces the loading of all the drivers in the proper order.
Hope this helps...
Kind Regards,
Remy
2008/1/6, Gregor Fuis <[EMAIL PROTECTED]>:
> Remy Bohmer wrote:
> > Hello Gregor,
> >
> > Can you please g
Hello All,
Maybe I have the answer:
I also had problems with switches and LNBs which did not want to work properly.
Behind 1 receiver it worked properly, but behind another 2 different
DVB-S PCI cards, it just failed. I never suspected the LNB/Switch
setup, because it worked behind another receive
