Sorry, I did just a little correction concerning MPEG and DVB...
Rolf
Am Son, 2003-02-16 um 11.56 schrieb Rolf Hakenes:
> Hi,
>
> sorry for this late reply, but I have been on a business trip last week.
>
> You are right. The si_parser.c code does not take care of adaptation
Hi,
sorry for this late reply, but I have been on a business trip last week.
You are right. The si_parser.c code does not take care of adaptation
fields at the moment. As far as I know, adaptation fields are only
relevant for the MPEG stream layer (like the video, audio or SI stream),
whereas si_
n for debug purposes.
from me:
+ CAT parsing
+ better CA descriptor parsing
+ some more descriptors, which are used for CAT
Have fun...
Rolf Hakenes
Am Die, 2003-02-04 um 10.34 schrieb raz nitzan:
> HI,
> There is no specific code to parse NIT nor the NIT descriptors.
> I have
>
> Hi,
> My idea is to use lisi to obtain to parse the DVB-SI stream.
> In all function of libsi i read
> u_char Buffer
> Who is Buffer?How to use the libsi?
> thanks in advance
> Felice
>
Hi Felice,
'libsi' is an integral part of VDR and DTV, and provides parser routines
for the data struc
Thomas Schmitt schrieb:
>
> Hello,
>
> does anybody know how to configure and use dtv_scan with a dvb-c? The manuals
> only say that this is possible but not how to do it. As far as I see works
> the default configuration only with a dvb-s.
>
> Thanks
> Thomas Schmitt
>
> --
> Info:
> To unsub
Reiner Rosin wrote:
> Hi,
>
>
>
> ...
>> There is always a diseqc message sent. This is, because I have noticed a
>> lot more tuning problems with my equipment (I do not have a diseqc
>> switch), if I did only send a message when needed. After going back to
>> 'always diseqc', all went f
Reiner Rosin schrieb:
>
> Hi,
> First of all: Great piece of software :)
>
> I took a quick look at the new DTV and have some infos/questions:
>
Hi Reiner,
> 1) when doing "make install" the file "key_definition.dcl" wasn't copied
> to the dist-dir (didn't examine that, but I suppose you just
Hi,
I am proud to announce the third public release of DTV. This (minor) release is
primarly intended to improve the configuration capabilities of DTV. A new method
for key-definitions, user-definable menus and Dcl-style options should enable
anyone, who is able to understand and write some Tcl s
Felix Domke schrieb:
>
> > I have downloaded the whole stuff some time ago (Webpage and programs). I
> don't
> > have it at home but at my work, so if anyone is interested, just mail me,
> I will
> > send you a tarball on Monday...
> > My first idea was to set up a complete mirror site, but I wou
Tim Lapawa schrieb:
>
> The links to the source are dead. Has anyone downloaded them before?
> Please send them to the list.
> We should distribute the files before people try to hide them from the public!
>
I have downloaded the whole stuff some time ago (Webpage and programs). I don't
have it
Carsten Koch schrieb:
>
> Rolf Hakenes wrote:
>
> >- enabled 'dtv_scan' to generate a VDR-compliant 'channel.conf' file
> > ** Comment to this feature: Due to the nature of DVB broadcastings
> > 'dtv_scan'
[EMAIL PROTECTED] schrieb:
>
> 10832 is hiband .. or am I wrong ?? And Klaus can tune ... and it looks
> like other can tune too to this channel
>
> will try to tune to the other available stations on this sat ...
>
> stefan
>
Hi,
I can tune to the channel as well...
Rolf
> "Mel Schaec
Stephan Schreiber schrieb:
>
> Hi everybody,
>
> I'm sorry but I have to ask this.
>
> I think I've RATFMs but still I am not able to create a working channellist
> for VDR.
> With Premiere World for example (especially CINEDOM / PPV channels) there
> seem to be some differences between cable a
Thomas Jagoditsch schrieb:
>
> hi rolf.
>
Hi,
> my questions about dtv:
>
> teletext:
> is there a possibility to use another font for teletext, if possible
> somthing straigth without serifes ? the current font is hard to read
> since the osd shrinked.
>
It would be possible, of course, but
Stefan Schluenss schrieb:
>
> Hi Rolf,
>
> do you have kids ? I have, and their bedtime starts often to the best tv
> time. So, i guess it would be better to spent the time to bring them into the
> bed (without watching steadily to the clock ) and start the tv evening just
> later.
>
No, I don't
Stefan Schluenss schrieb:
>
> Hi Guys,
>
> i bought a Hauppage WinTv Nova (SecondHand) to experiment with the DVB stuff under
>Linux.
> I have the dream to get this card running as the primary card and a MPEG2-decoder
>(DXR3)
> card as output device - wouldn't it be nice to have such a low cos
Jean-Claude Repetto schrieb:
>
> Not everybody is using an universal LNB. Most motorized installations have a
> Full-Band LNB, ans LO frequencies are different. Also, the 13V/18V
> commutation is used to switch the band, and not the polarisation. It would
> be nice if the LNB characteristics coul
Henrik Rasmussen schrieb:
>
> Hi,
>
> I posted a minireview of DTV 1.1.2 earlier but have to revise it because I
> made a major bummer in my lircd.conf. I had by mistake swapped the keys for
> the "a" and "o" event :(
>
> For DTV this means that practically all of the "bugs" mentioned in the
>
Jean-Claude REPETTO schrieb:
>
> I have installed DTV 1.1.2 and I have made these settings in the file
> dtv.conf :
>
> set outdev0 [open_output DVBS 0]
> source available_channels.dcl
> source channel_list.dcl
> add_channel_list -all $channel_list
>
> set indev1 [open_input LIRCD]
> set lircd_
Hi everybody,
as some people noticed during the weekend, there is a problem with keyboard
controlling of DTV (all versions). This is a known bug without a solution at
this time (IMO it is related to linux problems), but it exists a workaround to
get the keyboard control working: Disable all VTX p
Thomas Jagoditsch schrieb:
>
> >...
> > add_menu_item -all MENU TopLevel
> > add_menu_item -all CMD {Quit DTV} TopLevel {keypress -all q}
>
> hmm. tried that. segfaults me all the time ;-(
>
Hi again,
if something isn't tested, it will never run with the first try, that's kind of
Murphys Law..
Hi,
there is a new patch release of DTV available at
http://hesdvb.sourceforge.net/DTV-1.1.2.tar.gz
This release should fix problems with the '-all' switch when defining the
top-level user menu ('add_menu_item -all MENU TopLevel')
Greetings,
Rolf
--
Info:
To unsubscribe send a mail to [
Hi,
there is a new patch release of DTV available at
http://hesdvb.sourceforge.net/DTV-1.1.1.tar.gz
This release should fix some problems reported with dtv_scan and the newest
environment (driver and ASTRA channels)
Greetings,
Rolf
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED
Ralph Metzler schrieb:
>
> There are absolutely no tuning problems with ntuxzap on 3 different
> PCs and 5 different cards (including a revision 2.1 card) here.
> CI also works for me.
> I'll check after the weekend if there is something which might break
> tuning with other programs.
>
> Ralph
Jean-Claude REPETTO schrieb:
>...
> Today, (22/6) I have downloaded the latest CVS, and it is worse.
> dtv_scan hangs always at the same point :
>
> 22/06/01 16:58.40: frequency adjusted from 10877000 to 113675
> 22/06/01 16:58.40: scanning 10877000/V/22000
> 22/06/01 16:58.40: InpDev Scan Ge
Jean-Claude REPETTO schrieb:
>
> I also have tuning problems with my Hauppauge card, rev 1.3. The driver is
> from CVS (16-06), and the DTV version is 1.1. I am using a LFS installation
> with Linux kernel 2.4.4 on a Pentium 200 MMX with 64Mb RAM.
> I have used the option -v4 to display more mess
Hi,
I am proud to announce the second public release of DTV. This (minor) release is
primarly intended to add some really important features (Diseqc, Cable).
Additionally a preview version of user-definable menus is included to enable
people of playing around with such a feature. Of course some b
harald schrieb:
>
> Hello,
>
> i just upgraded my satelite hardware with another lnb and a diseq switch.
> One lnb is set to astra other to eutelsat. What program is able to search
> channels on multiple satelites with diseq? How to set up the program? I´m
> using Hauppauge DVB-S Card with RedHa
Hi,
the problem is the driver...it already has the reduced OSD size...if you like to
use DTV-1.0.5, you have to use a driver not newer than mid of may (from then on
the OSD memory size was decreased by the driver, sorry for that). Another option
would be to wait for some days. With DTV-1.1.0 the
Hi,
as I am considering at the moment to extend the channel tuning mechanism of DTV,
I would like to request a few opinions about the most important features needed.
>From my point of view, there are two possible directions to consider, one is to
support DVB-C/T cards (if they will appear in the
Hi again,
I totally forgot to announce something about the place, where the code can be
downloaded. The project is hosted by SourceForge.Net with the Name hesdvb. The
first release of DTV can be downloaded from:
http://prdownloads.sourceforge.net/hesdvb/DTV_1_0.tgz
Have fun,
rh
--
Inf
Hi again,
due to some other problems with compiling with disabled database interface,
there is another patch release of DTV available at
http://hesdvb.sourceforge.net/DTV-1.0.4.tar.gz
By the way: I strongly recommend to enable the database interface...it rocks...
Best regards,
Rolf
--
I
"L.H.Brouwer" schrieb:
>
> On Saturday 02 June 2001 21:26, Rolf Hakenes wrote:
> > Hi,
> >
> > due to the obvious but ashaming fact, that I didn't test the several
> > compile options of my source code very well, there is another new and
> > (ho
Hi,
due to the obvious but ashaming fact, that I didn't test the several compile
options of my source code very well, there is another new and (hopefully)
improved patch release of DTV available at
http://hesdvb.sourceforge.net/DTV-1.0.3.tar.gz
Fixed problems concern the compiling with disab
Hi,
as some of you already noticed, the new tarball I announced some hours ago does
not work at all. This seems to be due to problems sourceforge has with uploading
files. I am not able to post anything to them at the moment. Therfore I moved
the download location (temporarily) to
http://hesdvb.
gards
Rolf Hakenes
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as
subject.
[EMAIL PROTECTED] schrieb:
>
> On Sat, Jun 02, 2001 at 02:57:47PM +0200, Rolf Hakenes wrote:
> > [EMAIL PROTECTED] schrieb:
> > >
> > > Hi Rolf,
> > >
> > > i am trying to get your program compiled, very promising features ;-),
> > > i
Hi again,
I noticed one problem with the very early downloads of the DVT_1_0.tgz file
(before noon today). In directory 'scripts', there is a file
'create_eventdb.pl', which is responsible for getting the EPG-database from the
internet. For testing purposes, I did comment out the most important c
[EMAIL PROTECTED] schrieb:
>
> Hi Rolf,
>
> i am trying to get your program compiled, very promising features ;-),
> i dont get the datbase search switched off, i think, keeps searching
> for -lpq no matter if i give NO_DATABASE=0 or 1 and comment out SQLLIB or not,
> i am already downloading th
Hi folks,
obviously the announcement I posted yesterday evening on this list did not
appear until today. Therefore I try it again, hopefully it works this time:
I am proud to announce the first public release of a new client for controlling
the DVBs cards from Technotrend/Hauppauge/Siemens, whic
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as
subject.
41 matches
Mail list logo