On 16/02/07 19:54:45, Richard Scobie wrote:
[EMAIL PROTECTED] wrote:
This is very valuable to know. Sadly I couldn't find any info on this in
the
net.
What would You recon is ment with signal strength and signal quality
in
the M$ windows dvb-t programme? Would it be SIG
On 08/02/07 20:05:21, timecop wrote:
You will lose one or more TS packets (188bytes) if RS decoder (or some
other step before that) cannot fully recover the packet. Those packets
are usually marked with 'transport error indicator' flag, and mpeg
decoder skips them, or perhaps blindly tries to
Hallo!
I have a Hama USB DVB-T stick that doesn't ship with a IR-remote control but
it has a IR-reciever build in. (The windows driver reports that and Hama
confirms it) I got an IR-remote control from Hama of the newer device that is
very simillar to mine and ships with an IR-remote
On 16/02/07 07:02:10, timecop wrote:
Thanks for Your reply. After reading some docs about mpeg-TS I still
have
difficulties to realize the effects of loosing TS packets to the
macroblocks
(16x16 pixels) of the mpeg-2 video. Is there at least one full macroblock
in a
TS packet?
Hallo!
I tested the firmware and everything still woks. Sadly I still don't get any
SNR Values different from 0. Any idea what might be wrong? It seems it has the
capability:
dvbsnoop -s signal -pd 9 -n 9 -timeout 1000
dvbsnoop V1.4.00 -- http://dvbsnoop.sourceforge.net/
DEMUX :
Hallo!
I have this general question to DVB-T:
How is the qualtity of macroblocks influenced if my reception of the signal
isn't perfect?
I know macroblocks will be lost totally if the reception is not sufficient any
more. But what happens in between these cases? Can a single macroblock
On 22/01/07 19:51:18, [EMAIL PROTECTED] wrote:
On 21/01/07 00:08:09, Nico Sabbi wrote:
Also mplayer can display the video but without sound. If I let mencoder
encode it there is sound:
try with a larget -tsprobe.
What's in your ~/.mplayer/config and ~/.mplayer/mencoder* ?
Hallo!
I get this error if I try to use tzap on my hama USB 2.0 DVB-T Stick:
tzap ZDF
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
ERROR: error while parsing constellation (syntax error)
.tzap/channels.conf was created by:
scan initial_tuning_data.txt |
Hallo!
I'm concidering buying a freecom DVB-T USB stick. I just coudn't find info if
the radio is working as well under linux. Is it?
Then it says in the comment above the device list: These boxes can only
deliver part of the Transport Stream...UPDATE: the vendor was so kind to