'afternoon all,
Yes, I'm back on the list to show off my cluelessness some more!
An update on my saga. I have moved to OpenSUSE 10.2 (sorry Mattias
:-) in an attempt to get my DViCO FusionHDTV DVB-T Dual Digital rev
1.4 card working. The card is in fact recognised OOTB, but I could
not get it
tim belina wrote:
[snip]
> However, the card doesn't work properly:
>
> 1) I see only a single card in YaST, which describes the card as a
> FusionHDTV DVB-T Dual Digital. Perhaps that is correct, but I'm unsure
> if I should see one for each of the "dual" receivers.
Do, "modprobe cx88-dvb" ...
'afternoon Damien, Michael, and all,
First up, thanks for your help with this...
Do, "modprobe cx88-dvb" ... Then you will see the second adapter.
That was too easy; Ifeel silly now :-) I thought I had all the
modprobes sorted. Ah well, I do now :-)
I recommend an in-line amplifier. Th
'morning all,
Yes, I have RTFM (and wiki :-) but I cannot find a definite list of
modules that must be loaded in order to run the DViCO FusionHDTV DVB-T
Dual Digital rev 1.4 card. My machine was hanging on occasion (adding
to my card installation fun :-) so I decided to reinstall. YaST can
see
'morning Damien,
Thanks again for your reply...
Are you using the drivers shipped with the kernel, or did you compile
new ones from the mercurial sources?
I was using the ones that were shipped with the kernel, but I then
swapped to the ones from Andrew Pascoe's hg tree. Well, I think I
did.
