sorry if this has been posted a few times not getting anything back from list just bought a new dvico dd4 card it has a revision 2.0 stamped on it it is not picked up by mythtv in the usb driver id the card is ID 0fe9:db*78* DVICO ID 0fe9:db*78* DVICO mi id on new card is ID 0fe9:db*98* DVICOso i changed the id to 98 linux picked it up as a dvico dd4 dvb card with two tuners now mythtv finds the card but no frontend i think they have changed that as well
dmesg | grep dvb-usb [ 45.568438] dvb-usb: found a 'DViCO FusionHDTV DVB-T Dual Digital 4' in warm state. [ 45.568759] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 45.676871] dvb-usb: no frontend was attached by 'DViCO FusionHDTV DVB-T Dual Digital 4' [ 45.677733] dvb-usb: schedule remote query interval to 100 msecs. [ 45.677855] dvb-usb: DViCO FusionHDTV DVB-T Dual Digital 4 successfully initialized and connected. [ 45.677872] dvb-usb: found a 'DViCO FusionHDTV DVB-T Dual Digital 4' in warm state. [ 45.678261] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 46.003003] dvb-usb: no frontend was attached by 'DViCO FusionHDTV DVB-T Dual Digital 4' [ 46.003591] dvb-usb: schedule remote query interval to 100 msecs. [ 46.003900] dvb-usb: DViCO FusionHDTV DVB-T Dual Digital 4 successfully initialized and connected. lsusb -snip- Bus 002 Device 003: ID 0fe9:db98 DVICO Bus 002 Device 002: ID 0fe9:db98 DVICO lspci -snip- 05:06.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1Controller (rev 62) 05:06.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1Controller (rev 62) 05:06.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 65) 05:07.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder (rev 05) 05:07.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05) 05:08.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 05:08.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) card is back in xp box for recording i can run a protocol program to find the id just need to know what to use hope you can help
_______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb