Hello,
as found in this list :
Johannes Stezenbach wrote:
It seems Al Viro broke dvb_usercopy():
--- dvb_functions.c.orig2004-07-28 20:39:23.0 +0200
+++ dvb_functions.c 2004-07-28 20:21:23.0 +0200
@@ -36,7 +36,7 @@ int dvb_usercopy(struct inode *inode, st
[EMAIL PROTECTED] wrote:
I have just booted under 2.6.8-rc2 which has some DVB/v4l change since
2.6.8-rc1 and I don't get audio/video anymore. The OSD works, I can
zap to any channel and receive the EPG. Also I can't play recordings
made earlyer...
I have the same problem but only after
On Wed, Jul 21, 2004 at 01:34:28PM +0200, hgm.bg wrote:
I see no frontend. Are you sure you modprobe all frontends ?
See my .config :
CONFIG_DVB=y
CONFIG_DVB_CORE=y
CONFIG_DVB_VES1X93=y
CONFIG_DVB_AV7110=m
CONFIG_DVB_AV7110_OSD=y
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Gregoire Favre wrote:
| Hello,
|
| I have just booted under 2.6.8-rc2 which has some DVB/v4l change since
| 2.6.8-rc1 and I don't get audio/video anymore. The OSD works, I can zap
what v4l change?
maybe relevant:
[EMAIL PROTECTED]
[PATCH]
On Wed, Jul 21, 2004 at 06:18:44PM +0200, Thomas Schorpp wrote:
what v4l change?
From the patch :
patching file drivers/media/video/bttv-cards.c
patching file drivers/media/video/bttv-driver.c
patching file drivers/media/video/bw-qcam.c
patching file drivers/media/video/c-qcam.c
patching file
Hi there,
I think this is a Diseqc or a 22 kHz problem from the 0.9 dvb driver.
(s also Gernot A. Weber).
my investigations:
1.
Last running system:
dvb-driver 0.8.2 vdr 0.72 Linux 2.2.14 from SUSE 6.4
running without any problems.(Astra and Eutelsat)
DVB-S active multiswitch
Hauppauge DVB-s
Sat-Dish with two dual LNB's (Astra Hotbird)
8-port SAT-Switch
Hmm - that´s impossible
Are you sure your Sat-Equipmet is able to get a digital - Signal.
Usualy if you want to recieve Astra and Hotbird with more then 2 Recievers you must
have 2 Quadro-LNB´s and a Diseq 8Port
[EMAIL PROTECTED] wrote:
Hi there,
I've been trying to get my DVB Card running under linux for several weeks,
but after compiling and make insmod I only get the Convergence-Trademark,
and after it disappeares the screen went black.
I tried the step-by-step by Hubertus Sandmann and the
Can you tell me, if I have to make some changes in the standard
configuration of the driver or in the .dvbrc (maybe for the fact that
there is a switch between DVB and LNB).
I don't have a multiswitch, so i don't know what changes are required.
Hi,
I have a multiswitch too and had the