On Sep 22, 2006, at 5:33 PM, Michael Krufky wrote:
I have the original FusionHDTV5 Gold, and also the FusionHDTV5 RT
Gold.
(each in a different machine) I have never seen anything like this on
any of my hardware.
What motherboard chipset are you currently running on? For me it's
the Intel
On Sep 22, 2006, at 5:51 PM, hermann pitton wrote:
there was a report once caused by that on the disk dma was not
enabled.
Checked already if this could be the bottleneck with hdparm?
My drive is an SATA WD SE16 500G attached to the onboard SATA
controller. It's part of the Intel 965P sout
Am Freitag, den 22.09.2006, 17:33 -0400 schrieb Michael Krufky:
> Scott wrote:
> > Okay, I think I'm at the end of my rope. I can _reduce_ the frequency of
> > pci_abort messages on my FusionHDTV5 RT Gold by:
> >
> > A) In BIOS, setting my DDR2 667 memory to run at DDR2 533
> > B) In BIOS, setting
Scott wrote:
> Okay, I think I'm at the end of my rope. I can _reduce_ the frequency of
> pci_abort messages on my FusionHDTV5 RT Gold by:
>
> A) In BIOS, setting my DDR2 667 memory to run at DDR2 533
> B) In BIOS, setting the default PCI Bus Latency to 32 instead of 64
>
> But, I cannot eliminat
Okay, I think I'm at the end of my rope. I can _reduce_ the frequency
of pci_abort messages on my FusionHDTV5 RT Gold by:
A) In BIOS, setting my DDR2 667 memory to run at DDR2 533
B) In BIOS, setting the default PCI Bus Latency to 32 instead of 64
But, I cannot eliminate them. Regardless of th
On Sep 21, 2006, at 8:45 AM, Michael Krufky wrote:
The RT functionality is not yet supported under linux, but the card
has
100% functionality for atsc capture and analog framegrabbing.
This refers to the RTC on the RT? Honestly, it looked like mostly a
software branding issue between the
Scott wrote:
> cx2388x dvb driver version 0.0.5 loaded
> CORE cx88[0]: subsystem: 18ac:d500, board: DViCO FusionHDTV 5 Gold
> [card=31,autodetected]
> TV tuner 64 at 0x1fe, Radio tuner -1 at 0x1fe
> ACPI: PCI Interrupt :04:02.2[A] -> Link [LNKH] -> GSI 7 (level, low)
> -> IRQ 7
> cx88[0]/2: fou
> DVB: registering frontend 0 (LG Electronics LGDT3303 VSB/QAM
> Frontend)...
>
> This seems to match my actual device which is the "FusionHDTV 5 RT
> Gold". I had read that the "FusionHDTV5 RT Gold" and the "FusionHDTV5
> Gold Plus" were actually identical boards. The chips seemed to match
> up w
On Sep 20, 2006, at 11:05 PM, Lincoln Dale wrote:
I'm continuing to troubleshoot the above problem. Since I was seeing
this under 2.6.18-r7 and 2.6.17-r8-gentoo (uses a slightly older
version of linux-dvb and cx88 driver) I've moved back to using the
2.6.17-r8-gentoo kernel. That of course didn
> I'm continuing to troubleshoot the above problem. Since I was seeing
> this under 2.6.18-r7 and 2.6.17-r8-gentoo (uses a slightly older
> version of linux-dvb and cx88 driver) I've moved back to using the
> 2.6.17-r8-gentoo kernel. That of course didn't make to much of a
> difference, I didn't ex
On Sep 19, 2006, at 7:12 PM, Peter Fern wrote:
Scott wrote:
I have a FusionHDTV5 Gold RT running under Gentoo and vanilla kernel
2.6.18-rc7. The drivers load and I can view OTA ATSC streams using
mplayer.
I'm seeing the following message log:
cx88[0]: irq mpeg [0x8] pci_abort*
cx8
On Sep 19, 2006, at 7:12 PM, Peter Fern wrote:
Scott wrote:
Greets.
I have a FusionHDTV5 Gold RT running under Gentoo and vanilla kernel
2.6.18-rc7. The drivers load and I can view OTA ATSC streams using
mplayer.
I'm seeing the following message log:
cx88[0]: irq mpeg [0x8] pci_abo
Scott wrote:
> Greets.
>
> I have a FusionHDTV5 Gold RT running under Gentoo and vanilla kernel
> 2.6.18-rc7. The drivers load and I can view OTA ATSC streams using
> mplayer.
>
> I'm seeing the following message log:
>
> cx88[0]: irq mpeg [0x8] pci_abort*
> cx88[0]/2: general errors:
Greets.
I have a FusionHDTV5 Gold RT running under Gentoo and vanilla kernel
2.6.18-rc7. The drivers load and I can view OTA ATSC streams using
mplayer.
I'm seeing the following message log:
cx88[0]: irq mpeg [0x8] pci_abort*
cx88[0]/2: general errors: 0x0008
What
14 matches
Mail list logo