I am having several problems that I could use some help with.
First, I don't seem to be able to configure serial consoles on the physical
systems I am building. I am building Xenial systems from a stretch nfsroot.
I have a very small script that tries to update grub, but it keeps failing.
#!
On Wednesday, May 24, 2017 7:03:37 PM PDT, Bill MacAllister wrote:
I have determined that the update-grub command is what is
failing. I have tried lots of variations on that command line to
no avail. What am I missing?
And I now I have logs. The bit that is causing the problem is:
$ROOTCMD
Hi.
I think you have to bind-mount /dev, /sys and /proc into /target before chroot.
You won't have access to the devices if not.
Jan Dreyer
Sent by mobile
Am 25.05.2017 08:57 schrieb Bill MacAllister :
On Wednesday, May 24, 2017 7:03:37 PM PDT, Bill MacAllister wrote:
> I have determined that
Bill MacAllister writes:
> On Wednesday, May 24, 2017 7:03:37 PM PDT, Bill MacAllister wrote:
>
>> I have determined that the update-grub command is what is failing. I
>> have tried lots of variations on that command line to no avail. What
>> am I missing?
>
> And I now I have logs. The bit th
On Thursday, May 25, 2017 11:13:52 AM PDT, Ian Kelling wrote:
Bill MacAllister writes:
On Wednesday, May 24, 2017 7:03:37 PM PDT, Bill MacAllister wrote:
...
update-grub is run in the example config in 10-setup. Take a look there
to see if you are doing anything different.
I was definitel
On Thursday, May 25, 2017 12:39:13 AM PDT, jan.dre...@bertelsmann.de wrote:
I think you have to bind-mount /dev, /sys and /proc into
/target before chroot. You won't have access to the devices if
not.
The pointer I needed. Thanks Jan.
Bill
--
"Can't sing louder than the guns when I'm gone,