Hi Andrew,
thank you! The latest file is attached (pe-input-59.bz2).
Regards,
Thomas
pe-input-59.bz2
Description: BZip2 compressed data
Am 28.08.2013 um 01:40 schrieb Andrew Beekhof :
>
> On 27/08/2013, at 8:54 PM, Thomas Schulte wrote:
>
>> Hi list,
>>
>> I'm experiencing a strange
On 27/08/2013, at 8:54 PM, Thomas Schulte wrote:
> Hi list,
>
> I'm experiencing a strange problem an I can't figure out what's wrong. I'm
> running openSUSE 12.3 on a 2-node-cluster with pacemaker-1.1.9-55.2.x86_64.
>
> Every 15 minutes the following messages are logged. If stonith is enable
Hi Andrew,
thank you having still an eye on that issue.
I'll do my best to present the requested reports.
Best regards
Andreas Mock
-Ursprüngliche Nachricht-
Von: Andrew Beekhof [mailto:and...@beekhof.net]
Gesendet: Mittwoch, 28. August 2013 00:12
An: General Linux-HA mailing list
Cc:
On 27/08/2013, at 2:51 PM, Andreas Mock wrote:
> Hi Andrew,
>
> as this is a real showstopper at the moment I invested some other
> hours to be sure (as far as possible) not having made an error.
>
> Some additions:
> 1) I mirrored the whole mini drbd config to another pacemaker cluster.
> Sam
Hi list,
I'm experiencing a strange problem an I can't figure out what's wrong.
I'm running openSUSE 12.3 on a 2-node-cluster with
pacemaker-1.1.9-55.2.x86_64.
Every 15 minutes the following messages are logged. If stonith is
enabled, my hosts get fenced afterwards.
The messages appeared on
Hello,
ok so I was quite right ?
As I can read on your link :
It's pretty easy to setup. RRP supports various mode of operation:
* *Active: both rings will be active, in use*
* Passive: only one of the N ring is in use, the second one will be
use only if the first one fails
Make your
Bonjour Alain,
Check this:
http://www.sebastien-han.fr/blog/2012/08/01/corosync-rrp-configuration/
Best regards.
Francis
On 08/27/2013 08:03 AM, Moullé Alain wrote:
Hi,
So what's the real difference between using two rings with
rrp_mode=passive and rrp_mode=active ?
That's what makes me t