I am setting up heartbeat last friday and I came back today and the
folder /var/lib/heartbeat/pengine is huge what is the purpose of
this folder and how can I move it to a different location if it does get
full it does not crash my server. Any information would help. Thanks
Jason
_stonith_clone-op-01"/>
id="meat_stonith_clone-op-02"/>
−
−
Jason Erickson
___
Linux-HA mailing list
Linux-HA@lists.linux-ha.org
http://lists.linux-ha.org/mailman/listinfo/linux-ha
See also: http://linux-ha.org/ReportingProblems
The only part that i am confused about is where do you set the resource
score for a node?
Michael Schwartzkopff wrote:
Jason Erickson schrieb:
Yes I have monitor operation with these settings: interval = 10s
Timeout= 20s start delay= 5s role = stared on fail = restart
Is there
Yes I have monitor operation with these settings: interval = 10s
Timeout= 20s start delay= 5s role = stared on fail = restart
Is there anything else I need to do?
Michael Schwartzkopff wrote:
Jason Erickson schrieb:
When I deactivate my eth interface(to test) with my virtual Ip it
When I deactivate my eth interface(to test) with my virtual Ip it shuts down
and then shows up unmanaged. When the interface goes down I want it to transfer
to the other node. I am using OCF resources. Any Ideas?
Jason
___
Linux-HA mailing list
Linu
If I have only 2 nodes do i need to still use stonith? Won't each node
shoot each other if one goes down?
Jason
___
Linux-HA mailing list
Linux-HA@lists.linux-ha.org
http://lists.linux-ha.org/mailman/listinfo/linux-ha
See also: http://linux-ha.org/Re
I am having issues with MySQL. The init scripts work fine but if i test
MySQL by /etc/init.d/mysqld stop afterwards MySQL shows up as unmanaged
and will not restart or fail over. If I clean resources manually then
MySQL starts up again. Has anyone run into this problem?
Jason
--
Jason
Thanks,
Jason
--
Jason Erickson
Co-op
Michigan Technological University
System Administration Services
http://help.admin.mtu.edu
(906) 487-3636
___
Linux-HA mailing list
Linux-HA@lists.linux-ha.org
http://lists.linux-ha.org/mailman/listinfo/linux-ha
See
For whatever reason Samba will not work with heartbeat. I am using the
GUI and I added Samba and I know that the LSB script works. Is there
anything else that I need to do?
Jason
--
Jason Erickson
Co-op
Michigan Technological University
System Administration Services
http
any parameters or operations that I need to configure?
Jason
--
Jason Erickson
Co-op
Michigan Technological University
System Administration Services
http://help.admin.mtu.edu
(906) 487-3636
___
Linux-HA mailing list
Linux-HA@lists.linux-ha.org
http
an be information in the server-status that isn't
anyone's business but your one.
Matt
On Tue, 2008-02-26 at 10:17 -0500, Jason Erickson wrote:
I had to add
SetHandler server-status
Order allow,deny
Allow from all
to httpd.conf
Serge Dubrouski wrote:
On Tue, Feb 2
I had to add
SetHandler server-status
Order allow,deny
Allow from all
to httpd.conf
Serge Dubrouski wrote:
On Tue, Feb 26, 2008 at 7:38 AM, Jason Erickson <[EMAIL PROTECTED]> wrote:
I finally figured out what my problem was. Thank you so much for all
your help.
I finally figured out what my problem was. Thank you so much for all
your help.
Jason
Jason Erickson wrote:
I fixed it so the wget error does not come up. I also fixed the
html problem as well. Also you would not be able to get onto
http://ha.mtu.edu/index.html because it is on a vmware
-c wget -0- -q -L http://ha.mtu.edu/index.html | tr '\012' ' ' |
grep -Ei "[[:space:]]* "
Possible reasons:
1. You don't have wget
2. Your status page doesn't have a neither tag in it.
BTW, I can't get to http://ha.mtu.edu/index.html either.
On
as defined in
included config files, like your httpd.conf has Include
mpm_worker.conf and that included conf file had PidFile directive.
Those problems were fixed in 2.1.3, if you use older version and has
PidFile defined in an included file then move that directive to
httpd.conf.
On Mon, Feb 25, 2008
tart
On Mon, Feb 25, 2008 at 11:59 AM, Jason Erickson <[EMAIL PROTECTED]> wrote:
Yah that is set to /opt/apache
apache will start up find with an init script. For whatever reason
heartbeat will not start up apache
Serge Dubrouski wrote:
> It looks like Apache RA can't fin
n Mon, Feb 25, 2008 at 10:03 AM, Jason Erickson <[EMAIL PROTECTED]> wrote:
Attached is my log. Maybe that will helped. If not what other logs can i
check.
Dejan Muhamedagic wrote:
> Hi,
>
> On Mon, Feb 25, 2008 at 11:25:24AM -0500, Jason Erickson wrote:
>
>>
Attached is my log. Maybe that will helped. If not what other logs can i
check.
Dejan Muhamedagic wrote:
Hi,
On Mon, Feb 25, 2008 at 11:25:24AM -0500, Jason Erickson wrote:
This is what crm_verify said
crm_verify[26987]: 2008/02/25_11:30:41 WARN: unpack_rsc_op: Processing
failed op
, 2008 at 10:00 AM, Jason Erickson <[EMAIL PROTECTED]> wrote:
Sorry there was a typo here is what i have: http://192.168.1.30/index.html
Serge Dubrouski wrote:
> On Fri, Feb 22, 2008 at 9:53 AM, Jason Erickson <[EMAIL PROTECTED]> wrote:
>
>> I configure it w
Sorry there was a typo here is what i have: http://192.168.1.30/index.html
Serge Dubrouski wrote:
On Fri, Feb 22, 2008 at 9:53 AM, Jason Erickson <[EMAIL PROTECTED]> wrote:
I configure it with httpd://192.168.1.30/index.html
httpd What protocol is it?
Is the syntax
pache is up and answers.
On Fri, Feb 22, 2008 at 7:27 AM, Jason Erickson <[EMAIL PROTECTED]> wrote:
Thanks, I will try adding that and see what happens. only question I
have is what do i need to put for /server-status/?
do I put the words "server-status" or should it be som
e configuration part.
On Thu, Feb 21, 2008 at 2:30 PM, Jason Erickson <[EMAIL PROTECTED]> wrote:
We compiled apache from source so for some reason it will not start up
with the ocf file. I went into the file
/usr/lib/ocf/resource.d/heartbeat/apache
and changed the path for httpd.con
cript?
On Thu, Feb 21, 2008 at 2:17 PM, Jason Erickson <[EMAIL PROTECTED]> wrote:
What are the steps to write a LSB script for apache. I am using version
2.1.3 with crm. I found an example once but I can not find it anymore.
Does anyone have a good example?
What are the steps to write a LSB script for apache. I am using version
2.1.3 with crm. I found an example once but I can not find it anymore.
Does anyone have a good example?
Jason
___
Linux-HA mailing list
Linux-HA@lists.linux-ha.org
http://list
After I changed the apache file I could not see that error. But i might of been
looking in the wrong spot that is always a possibility. Thanks once again.
Jason Erickson
Dejan Muhamedagic wrote:
Hi,
On Wed, Feb 20, 2008 at 09:44:26AM -0500, Jason Erickson wrote:
I rearranged my setup a
wrote:
Hi,
On Tue, Feb 19, 2008 at 12:12:24PM -0500, Jason Erickson wrote:
I am trying to set up Heartbeat with an virtual Ip, NFS share and an Apache
web server. The virtual Ip and NFS share work but for some reason the
Apache server wants to run on 2 nodes and will not start. It comes up as
I am trying to set up Heartbeat with an virtual Ip, NFS share and an
Apache web server. The virtual Ip and NFS share work but for some
reason the Apache server wants to run on 2 nodes and will not start. It
comes up as being unmanaged. I configured collocation and order so they
would be on the
I have heartbeat 2.0.8 installed on RHEL4. I am having trouble getting
apache to work. After reading over a lot of posts I see that version
2.0.8 was a bad release. What is my best options? Do I need to install
from source or is there a new RPM that I can use instead?
Thanks,
Jason
28 matches
Mail list logo