Hello,
We are planning to have a ha for our solution with linux-ha. we need to
have ip address takeover and mac address takeover.
our solution makes use of 1 WAN(eth0) and 1 LAN-eth1 (and also virtual
eth1:1) for its purpose. Since both the nics will be used up, planning
to use the serial port for
Nagaraja, Madhukar (Madhukar) wrote:
> Hello,
> We are planning to have a ha for our solution with linux-ha. we need to
> have ip address takeover and mac address takeover.
>
> our solution makes use of 1 WAN(eth0) and 1 LAN-eth1 (and also virtual
> eth1:1) for its purpose. Since both the nics wil
active, the ip address
of the active has to be used by passive.
I will do more investigations and back with more querries :-)
Thanks.
--
Message: 5
Date: Wed, 26 Nov 2008 11:26:14 +0100
From: Luis Motta Campos <[EMAIL PROTECTED]>
Subject: Re: [Linux-HA] Linux HA config qu
Nagaraja, Madhukar (Madhukar) wrote:
> Hello luis motta campos,
>
> Well I did not completely misunderstand.
> And your response cleared my understanding.
>
> Basically, I want all the eth interfaces to be part of the ha
> clustering. Bcos we the need the same ip addresses on both the active
> an
Hi,
On Thu, Nov 27, 2008 at 10:45:30AM +0100, Luis Motta Campos wrote:
> Nagaraja, Madhukar (Madhukar) wrote:
> > Hello luis motta campos,
> >
> > Well I did not completely misunderstand.
> > And your response cleared my understanding.
> >
> > Basically, I want all the eth interfaces to be part