Hi,
When I tried ipmitool -I lan -U root -H ip -a chassis power cycle. It did not
work but it worked with -I open interface.
- it can't work without IP-adr. (ip=?)
You must first configure the ipmi( iLO 3) card with ipmitool, e.g.:
ipmitool lan print
ipmitool lan set 1 ipaddr 10.10.40.48
If i rember well, for use Ilo 3 card you sould use the cluster agent
ipmilan
Il giorno 11 aprile 2012 23:00, Pham, Tom tom.p...@viasat.com ha scritto:
Hi everyone,
I try to test a 2 nodes cluster with stonith resource using external/ipmi
( I tried external/riloe first but it does not seem
Hi,
did you properly configure BOTH ipmi with ipmitool? And ipmi started?
/etc/init.d/ipmi start
What says the command:
ipmitool -I lan -H IP_OF_OTHER_NODE -U SOMEUSER -A MD5 -P SOMEPASSWORD power
status
HTH
Nikita Michalko
Am Mittwoch, 11. April 2012 23:00:41 schrieb Pham, Tom:
Hi
)
--
Message: 1
Date: Wed, 11 Apr 2012 21:00:41 +
From: Pham, Tom tom.p...@viasat.com
Subject: [Linux-HA] Problem with stonith RA using external/ipmi over
lan or lanplus interface
To: 'linux-ha@lists.linux-ha.org' linux-ha@lists.linux-ha.org
Message-ID
Hi everyone,
I try to test a 2 nodes cluster with stonith resource using external/ipmi ( I
tried external/riloe first but it does not seem to work)
My system has HP Proliant BL460c G7 with iLO 3 card Firmware 1.15
SUSE 11
Corosync version 1.2.7 ; Pacmaker 1.0.9
When I use the interface lan or