Robert Schelander wrote:
>
> Thanks for your answer. I've followed all the
> suggestions, but still have the same problem :(
>
> >But you have no "route" line... Try adding
> >> route oe8rsq-14 192.168.1.1 udp 93 d
> While assembling the email, I've deleted
> the comments out of the config-file
> Well... the AX25-HOWTO is outdated so you should not take everything
> that is in that document as a fact...
I've noticed this, also the HOWTO's seem to be a little different from one
"mirror" site to the next... even though they are all dated the same.
I use Redhat, 6.1 (Kernel 2.2.x). Any su
Thanks for your answer. I've followed all the
suggestions, but still have the same problem :(
>But you have no "route" line... Try adding
>> route oe8rsq-14 192.168.1.1 udp 93 d
While assembling the email, I've deleted
the comments out of the config-file and accidentially
deleted my route too. I
> Has anyone gone down this route with RedHat 6 and running an scc card.
Is
> the latest one compatible and would I have to recompile it, or use the
> ones that are precomiled and come with the package.
>
> The only scc package that I can find that is at all current is
>
> z8530drv-utils-3.0-1.dl1
Hi Guys,
Has anyone gone down this route with RedHat 6 and running an scc card. Is
the latest one compatible and would I have to recompile it, or use the
ones that are precomiled and come with the package.
The only scc package that I can find that is at all current is
z8530drv-utils-3.0-1.dl1bk
Louis Kruger escribió:
>
> Hi,
>
> I did the following:
> Linux 2.0.36:
> setserial /dev/ttyS1 uart none
> insmod hdlcdrv
> insmod baycom .
> sethdlc ...
> ifconfig bc0 up
>
> TNOS 2.30
> attach kernel bc0
>
> When I use ax25-utils's listen I get traffic.
>
> TNOS's monitor, h
Hi Robert,
I'm using the same configuration here (linux/ax25ipd
win98/flexnet). It works ;-)
> linux/ax25ipd.conf:
> # udp and tnc necessary for flexnet
> socket udp 93
> mode tnc
> mycall oe8rsq-13
> myalias robert
In mode tnc you don't need mycall/myalias.
> beacon every 3600
> btext ax25ip
> I can't seem to get the convers daemon to compile on my box. I'm using
> Kernel 2.2.13 on RedHat 6. Anyone got it pre-compiled?
What conversd do you mean? The original ppconvers 3.12/3.13? Or one of
these (h)tpp clones? I am running a ppconvers 3.13 here, only hat to add
one include to make it
Hi,
I've been trying out the 6pack support as shipped with
SuSE 6.2 , kernel 2.2.10. It does work but throughput is so much slower
than using the kiss interfaceanybody know why this might be?
The kernel has been compiled for 6pack support but it still
prompts me to 'insmod' the module.
