84a5
--
Daniel J Blueman
-
To unsubscribe from this list: send the line unsubscribe linux-ide in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
On 06/09/07, Mark Lord [EMAIL PROTECTED] wrote:
Alan Cox wrote:
On Tue, 4 Sep 2007 13:37:22 +0100
Daniel J Blueman [EMAIL PROTECTED] wrote:
We see that in ata_piix.c, there is a whitelist for (laptop) Intel ICH
controllers with short cables, tied to specific vendor subsystem IDs
)
SATA IDE Controller (rev 03) (prog-if 80 [Master])
Subsystem: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA
IDE Controller
# lspci -vns 00:1f.2
00:1f.2 0101: 8086:2828 (rev 03) (prog-if 80 [Master])
Subsystem: 8086:2828
--
Daniel J Blueman
-
To unsubscribe from this list
On 02/08/07, Mark Lord [EMAIL PROTECTED] wrote:
Daniel J Blueman wrote:
On 02/08/07, Tejun Heo [EMAIL PROTECTED] wrote:
Daniel J Blueman wrote:
I'll grab kernel logs from the legacy ATA boot; what else can help
debug this issue? No problem testing patches too.
Yeap, please post the old
Tejun,
On 03/08/07, Tejun Heo [EMAIL PROTECTED] wrote:
Daniel J Blueman wrote:
The ICH8 south-bridge I have is the mobile variant and does come
equipped with native parallel IDE - see page 447:
http://download.intel.com/design/chipsets/datashts/31305603.pdf . I do
see 35MB/s with DMA
-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
--
Daniel J Blueman
-
To unsubscribe from this list: send the line unsubscribe linux-ide in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
On 02/08/07, Tejun Heo [EMAIL PROTECTED] wrote:
Daniel J Blueman wrote:
I'll grab kernel logs from the legacy ATA boot; what else can help
debug this issue? No problem testing patches too.
Yeap, please post the old log.
Not much actually - perhaps I need to enable some debugging:
Uniform
On 30/05/07, Lee Revell [EMAIL PROTECTED] wrote:
On 5/30/07, Daniel J Blueman [EMAIL PROTECTED] wrote:
I have a SanDisk Extreme IV 4GB CF card, capable of 40MB/s read, but
am seeing 30MB/s read [1], connected directly to the IDE bus on my
ICH8 controller.
How do you know it's capable of 40MB
7da5
Daniel
On 31/05/07, Mark Lord [EMAIL PROTECTED] wrote:
Daniel J Blueman wrote:
I have a SanDisk Extreme
On 31/05/07, Mark Lord [EMAIL PROTECTED] wrote:
Daniel J Blueman wrote:
Hi Mark,
Thanks for the reply; here is the raw identification data:
# hdparm --Istdout /dev/sdb
/dev/sdb:
[snip]
Ooops.. wrong drive. That's NOT a CF card. Try again?
Whoops, yes. Here is the expected data
On 31/05/07, Mark Lord [EMAIL PROTECTED] wrote:
Daniel J Blueman wrote:
Whoops, yes. Here is the expected data:
[snip]
Thanks. I'll use that data to update/validate future versions of hdparm.
At UDMA66, it *should* be capable of the 40MByte/sec realm of readback perf,
assuming the card
Hi Mark,
On 31/05/07, Mark Lord [EMAIL PROTECTED] wrote:
Daniel J Blueman wrote:
On 31/05/07, Mark Lord [EMAIL PROTECTED] wrote:
Daniel J Blueman wrote:
Whoops, yes. Here is the expected data:
[snip]
Thanks. I'll use that data to update/validate future versions of hdparm.
At UDMA66
12 matches
Mail list logo
