hi,
dmesg shows this:
-- ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 ACPI: PCI interrupt 0000:01:0b.0[A] -> GSI 18 (level, high) -> IRQ 18 ata1: SATA max UDMA/100 cmd 0xF0806080 ctl 0xF080608A bmdma 0xF0806000 irq 18 ata2: SATA max UDMA/100 cmd 0xF08060C0 ctl 0xF08060CA bmdma 0xF0806008 irq 18 ata1: dev 0 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c69 86:3c01 87:4003 88:20ff ata1: dev 0 ATA, max UDMA7, 156368016 sectors: lba48 ata1: dev 0 configured for UDMA/100 scsi0 : sata_sil ata2: no device found (phy stat 00000000) scsi1 : sata_sil Vendor: ATA Model: SAMSUNG SP0812C Rev: SU10 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 156368016 512-byte hdwr sectors (80060 MB) SCSI device sda: drive cache: write back SCSI device sda: 156368016 512-byte hdwr sectors (80060 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sda4 < sda5 > Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
but I only have one physical drive attached. I don't seem to have problems though. Yesterday I got an oops, but I don't know whether it is connected. I copied it here just in case.
I don't know whether rc4 or earlier showed this beahaviour. I am sure that 2.6.10 didn't show it.
The double-output is normal for the SCSI layer, and has occurred on 2.6.10 and previous.
The oops has nothing to do with SATA.
Jeff
- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
