Wonderful, Jeff! Thanks a lot, now my TX4000 can be used under Linux
just ok! :) Without hacking libata-core.c. So, I suggest you to
include your patch for correct TX4000 work into further kernel
releases.
Now, only two small things disturbs me:
1. My hard drives are now online, but on any other f
Yuri Kirsanov wrote:
Good day. I've tried latest kernel 2.6.13-rc7, TX4000 support seems to
be in sata_promise already. After startup I see following in dmesg:
libata version 1.12 loaded.
sata_promise version 1.02
PCI: Found IRQ 5 for device :01:09.0
ata1: PATA max UDMA/133 cmd 0xCC81C200 ct
On Sun, 2005-08-28 at 21:08 +0400, Yuri Kirsanov wrote:
> As you can see, only one hard drive is connected to my TX4000, and
> because I disabled sata check I get abnormal status on another ports.
> But my hard drive works just fine! I'm looking forward to attach
> another hard drive and create RAI
On Sun, 2005-08-28 at 17:33 +0400, Yuri Kirsanov wrote:
> Good day. I've tried latest kernel 2.6.13-rc7, TX4000 support seems to
> be in sata_promise already. After startup I see following in dmesg:
>
> libata version 1.12 loaded.
> sata_promise version 1.02
> PCI: Found IRQ 5 for device :01:0
Yes, with another hard drive, which is error-free everything works
just fine, with one exception:
libata version 1.11 loaded.
sata_promise version 1.01
PCI: Found IRQ 5 for device :01:0a.0
ata1: SATA max UDMA/133 cmd 0xCC802200 ctl 0xCC802238 bmdma 0x0 irq 5
ata2: SATA max UDMA/133 cmd 0xCC802
Look's like I've found solution. I've checked libata_core.c and found
following strings in it (line 1427):
if (sata_dev_present(ap))
ata_port_probe(ap);
else {
sstatus = scr_read(ap, SCR_STATUS);
printk(KERN_INFO "ata%u: no device found (phy stat
Good day. I've tried latest kernel 2.6.13-rc7, TX4000 support seems to
be in sata_promise already. After startup I see following in dmesg:
libata version 1.12 loaded.
sata_promise version 1.02
PCI: Found IRQ 5 for device :01:09.0
ata1: PATA max UDMA/133 cmd 0xCC81C200 ctl 0xCC81C238 bmdma 0x0
lar issues with the S150 TX4 and the SATAII TX4.
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:linux-ide-
> [EMAIL PROTECTED] On Behalf Of Yuri Kirsanov
> Sent: Saturday, 20 August 2005 6:17 PM
> To: linux-ide@vger.kernel.org
> Subject: TX4000 RAID and sata_promi
Yes, you are right, 4xPATA.
http://www.promise.com/product/product_detail_eng.asp?segment=RAID%20HBAs&product_id=104
I've been googling for a patch and found
Jeff Garzik's patch for this card to support it.
Here's the patch:
--- a/drivers/scsi/sata_promise.c Sat May 7 05:20:31 2005
+++ b/d
On Thu, 2005-06-23 at 21:05 +0400, Yuri Kirsanov wrote:
> Here's my dmesg with sata_promise compiled-in kernel:
[ ... ]
I don't get it. There is no mentioning of libata whatsoever!
smime.p7s
Description: S/MIME cryptographic signature
Here's my dmesg with sata_promise compiled-in kernel:
Linux version 2.6.12.4-10flh ([EMAIL PROTECTED]) (gcc version 3.4.3
(Mandrakelinux 10.2 3.4.3-7mdk)) #3 SMP Tue Aug 16 21:34:11 MSD 2005
BIOS-provided physical RAM map:
BIOS-e820: - 000a (usable)
BIOS-e820: 0
ES> Hmm, then I guess it would be very interesting to know WHY it doesn't
ES> load at boot time! What are the symptoms?
ES> It seems to strange to me that sata reports PATA devices... What kind of
ES> harddisks do you connected (brand, type, pata/sata?)
I don't know why it doesn't load autoload,
ES> Hmm, then I guess it would be very interesting to know WHY it doesn't
ES> load at boot time! What are the symptoms?
ES> It seems to strange to me that sata reports PATA devices... What kind of
ES> harddisks do you connected (brand, type, pata/sata?)
I have Promise TX4000 4xPATA controller...
On Tue, 2005-06-21 at 21:47 +0400, Yuri Kirsanov wrote:
> Roger, dmesg (sata_promise doesn't load at boot time for some reason,
> so i start it by 'modprobe sata_promise'):
Hmm, then I guess it would be very interesting to know WHY it doesn't
load at boot time! What are the symptoms?
> sata_promi
Well, dmraid is no use, cause sata_promise.ko doesn't see my hard
drives...Any other ideas? How can I diagnose it?
I only want my sata_promise.ko to see my hard drives...But it only
says "phy "...%(((
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a m
; <[EMAIL PROTECTED]>
Cc:
Sent: Tuesday, August 16, 2005 5:50 PM
Subject: Re: TX4000 RAID and sata_promise
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, 2005-08-16 at 17:35 +0400, Yuri Kirsanov wrote:
> Right, I'd like to do that, but even when no raid is defined in BIOS, Linux
> can't see any hard disks on any ports of that card...
> I'll check out dmraid today's evening. Thanks for replies.
You'd better take on step at a time. That is, f
Right, I'd like to do that, but even when no raid is defined in BIOS, Linux
can't see any hard disks on any ports of that card...
I'll check out dmraid today's evening. Thanks for replies.
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PRO
On Tue, 2005-08-16 at 06:10 -0700, Tyler wrote:
> Check out dmraid or dm_raid (not sure which it goes by, in order to
> google it), it is the package that tries to support "bios raids" on
> ide/sata cards. It may be what you're looking for.
Even better, forget the whole fake raid from the bios, a
Check out dmraid or dm_raid (not sure which it goes by, in order to
google it), it is the package that tries to support "bios raids" on
ide/sata cards. It may be what you're looking for.
Tyler.
Yuri Kirsanov wrote:
Good day. I have Mandrake Linux LE2005 with custom kernel
2.6.12.2+Reiser4 pat
TX4000 RAID and sata_promise.
Good day. I have Mandrake Linux LE2005 with custom kernel
2.6.12.2+Reiser4 patch+TX4000 patch
(First part of this patch
http://www.mail-archive.com/linux-ide@vger.kernel.org/msg00150.html
second part failed and I can't figure out how to apply it). When
21 matches
Mail list logo
