Tejun Heo wrote:
Mark Paulus wrote:
Well, I feel foolish.
One problem is that the prebuilt kernel is using an initrd
image, so I made your patch changes, and put them into
/lib/modules/`uname -r`/kernel/drivers/ata/sata_sil.ko,
and guess what, they never got loaded. Foolishness on my
part.
Mark Paulus wrote:
Well, I feel foolish.
One problem is that the prebuilt kernel is using an initrd
image, so I made your patch changes, and put them into
/lib/modules/`uname -r`/kernel/drivers/ata/sata_sil.ko,
and guess what, they never got loaded. Foolishness on my
part.
Anyway, this
Well, I feel foolish.
One problem is that the prebuilt kernel is using an initrd
image, so I made your patch changes, and put them into
/lib/modules/`uname -r`/kernel/drivers/ata/sata_sil.ko,
and guess what, they never got loaded. Foolishness on my
part.
Anyway, this time I got to the
Mark Paulus wrote:
Yes, I am. It's a SD-ADSAIDE-S1, with a sil3611ct80 chip on board.
My question would be, what makes the 2.6.22 kernel different enough
than the 2.6.18 kernel that this setup is causing problems in .22.
Is .18 masking the problems, or is .22 just looking at things with
Tejun Heo wrote:
Mark Paulus wrote:
Yes, I am. It's a SD-ADSAIDE-S1, with a sil3611ct80 chip on board.
My question would be, what makes the 2.6.22 kernel different enough
than the 2.6.18 kernel that this setup is causing problems in .22.
Is .18 masking the problems, or is .22 just looking
Tejun Heo wrote:
Hello,
Mark Paulus wrote:
sata_sil :02:0b.0: version 2.2
ACPI: PCI Interrupt :02:0b.0[A] - GSI 22 (level, low) - IRQ 18
scsi0 : sata_sil
scsi1 : sata_sil
ata1: SATA max UDMA/100 cmd 0xe0812080 ctl 0xe081208a bmdma 0xe0812000
irq 18
ata2: SATA max UDMA/100 cmd
Hello,
Mark Paulus wrote:
sata_sil :02:0b.0: version 2.2
ACPI: PCI Interrupt :02:0b.0[A] - GSI 22 (level, low) - IRQ 18
scsi0 : sata_sil
scsi1 : sata_sil
ata1: SATA max UDMA/100 cmd 0xe0812080 ctl 0xe081208a bmdma 0xe0812000
irq 18
ata2: SATA max UDMA/100 cmd 0xe08120c0 ctl
Hello,
I have a Compaq Deskpro EN P3 Celeron 850, running
Debian etch with a 2.6.18 kernel, which runs/boots
fine. It has an add-in generic SIL3112 SATA card,
which also works fine with the 2.6.18 kernel.
I just tried to install a 2.6.22 kernel from
www.backports.org, and that kernel will not