Rusty Russell wrote:
>
> In message <[EMAIL PROTECTED]> you write:
> > Here is an attempt at a possible version of synchronize_kernel() that
> > should work on a preemptible kernel. I haven't tested it yet.
>
> It's close, but...
>
> Those who suggest that we don't do preemtion on SMP make
Hi folks,
Has anybody an idea how to get rid of the annoying clicks of the
VIA 82C686 audio codec? Using xmms (just as an example) I get a
click with each new track, when I move and release the track slider,
etc.
Even this
echo -n "" >/dev/dsp
produces a click.
Regards
Harri
-
To
On Sat, Mar 31, 2001 at 10:03:28PM -0800, Jonathan Morton wrote:
[snip]
> Issue 3:
> The OOM killer was frequently killing the "wrong" process. I have
> developed an improved badness selector, and devised a possible means of
> specifying "don't touch" PIDs at runtime. PID 1 is never
There's clearly been lots of discussion about OOM (and memory management in
general) over the last week, so it looks like it's time to summarise it and
work out the solution that's actually going to find it's way into the
kernel.
Issue 1:
The OOM killer was activating too early. I have
Hello. I'm trying to compile new kernel 2.4.3 and I get some errors:
yakov:/usr/src/linux$ make modules
make[2]: Entering directory `/home/linux-2.4.3/drivers/block'
gcc -D__KERNEL__ -I/home/linux-2.4.3/include -Wall -Wstrict-prototypes -O2
-fomi
t-frame-pointer -fno-strict-aliasing
On Sun, Apr 01, 2001 at 04:15:38PM +1200, Simon Garner wrote:
> Hi,
>
> I've compiled kernel 2.4.3 on the following RH7 system, and I'm now getting
> random crashes at boot, during IO-APIC initialisation. Random meaning that
> sometimes it boots fine, other times it doesn't, and it hangs in
>"Justin T. Gibbs" wrote:
>
>> >I upgraded to 2.4.3 from 2.4.1 today and I get a lot of recovery on the scs
>i
>> >bus.
>> >I also upgraded to the "latest" aic7xxx driver but still the sam problems.
>> >A typical revery in my logs.
This really looks like you bus is not up to snuff. We timeout
Hi,
could you please help me figure out why is that happenning:
After succesfull pivot_root & chroot from initrd,
I *do* unmount /initrd, (no directories, no mapped files...),
but I can *not* free the memory:
"blockdev --flushbufs /dev/rd/0" returns "BLKFLSBUF: Device or resource
busy".
Hi,
I've compiled kernel 2.4.3 on the following RH7 system, and I'm now getting
random crashes at boot, during IO-APIC initialisation. Random meaning that
sometimes it boots fine, other times it doesn't, and it hangs in different
places (but always around IO-APIC stuff). It almost always hangs
"Justin T. Gibbs" wrote:
> >I upgraded to 2.4.3 from 2.4.1 today and I get a lot of recovery on the scsi
> >bus.
> >I also upgraded to the "latest" aic7xxx driver but still the sam problems.
> >A typical revery in my logs.
>
> Can you resend the recovery information after booting with
> [1.] Loopback device hangs on mount command.
>
> [2.] Mounting a loopback device hangs the process. Eg. Issuing
>
> losetup /dev/loop0 fsimg
> mount /dev/loop0 /mnt
>
> will hang at the mount command. The mount process cannot be
> killed, nor can the loopback device be
On Fri, 30 Mar 2001, [EMAIL PROTECTED] wrote:
> tmpfs (or shmfs or whatever name you like) is still different in
> official series (2.4.3) and in ac series. Its a kick in the ass for
> multiboot, as offcial 2.4.3 does not recognise 'tmpfs' in fstab:
>
> shmfs /dev/shmtmpfs ...
Use
On Sat, Mar 31 2001, Bill Rossi wrote:
>
> [1.] Loopback device hangs on mount command.
use 2.4.3, known and fixed bug
--
Jens Axboe
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at
I have an ALi chipset motherboard that seems to function normally. K6-2
450, 256mb ram, 20gb ide fujitsu hard disk. Every time I boot up I get
this unsettling message about PCI: No IRQ known for interrupt pin A of
device 00:0f.0. Please try using pci=biosirq.
It turns out that 00:0f.0 is my
Out of the ashes arises a better KernelWiki, with more expressive
power, more features, more pages and a _lot_ of work to be done to
update all your excellent submissions to the new PhpWiki syntax ;)
enjoy: http://kernelbook.sourceforge.net/wiki/index.php
--
Gary Lawrence Murphy <[EMAIL
[1.] Loopback device hangs on mount command.
[2.] Mounting a loopback device hangs the process. Eg. Issuing
losetup /dev/loop0 fsimg
mount /dev/loop0 /mnt
will hang at the mount command. The mount process cannot be
killed, nor can the loopback device be destroyed with
Hello,
there is something wrong with smbfs caching which makes my
applications fail. The behaviour happens with
linux-2.4.3-pre4 and linux-2.4.3-final.
Consider following shell script: (where /mnt/n is a
smbmounted smb share from a Win98SE box)
router|/mnt/n/temp/smbfs> I=0; while test $I -lt
Hi.
While running kernel 2.4.2-ac28, I switched on spinlock debugging and
verbose BUG() reporting (I always use sysrq). Anyway, while running this I
got an oops after about 2 or 3 minutes running, several times, exact same
place each time, which I traced back to rh_int_timer_do(). This was in
Daniel Nofftz <[EMAIL PROTECTED]> wrote:
> i can`t get my smc etherpower ii working with the 2.4.3 kernel.
> now i have downgraded to 2.4.2 and it works again ...
> does anyone have a suggestion, what the problem is ?
Looks to me like the problem I had in Febuary, see the thread
"epic100 in
The w9966cf webcam v4l driver now has a homepage:
http://hem.fyristorg.com/mogul/w9966.html
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the
ppp chat script stopped working under 2.4.3. I ran a program of my own
that opens ttyS1 and it also fails on a tcgetattr with errno=5 (IO error).
The ppp chat script and my program both work fine under 2.4.2 and older.
jpd
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel"
On Sat, 31 Mar 2001 07:17:19, "Rafael E. Herrera"
<[EMAIL PROTECTED]> wrote:
> J Brook wrote:
> >
> > >With 2.4.2 it was working just fine.
> >
> > I have also noticed problems with the 2.4.3 release. I have a G450
> > 32Mb, that I use in single-head mode. The console framebuffer runs
> >
Hello all. Without the attached patch, SysRq doesn't work over a serial
console here. Has anyone else seen this problem?
--
Tom Rini (TR1265)
http://gate.crashing.org/~trini/
diff -Nru a/linux/drivers/char/n_tty.c b/linux/drivers/char/n_tty.c
--- a/linux/drivers/char/n_tty.cSat Mar
I reported this a while back but no fix went into the 2.4.3 kernel so I thought I'd ask again. Is this just a problem waiting for a driver? Or have I missed a setting?
I have the ALi Magick1 chipset and on boot (and in dmesg) I get the following messages:
PCI: PCI BIOS revision 2.10 entry at
Em Sat, Mar 31, 2001 at 01:55:23PM -0600, Stephen Crowley escreveu:
> Trying to compile 2.4.3 with ipx support gives the following
>
> net/network.o(.data+0x3e48): undefined reference to sysctl_ipx_pprop_broadcasting'
oops, Linus/David, can you please apply this?
- Arnaldo
---
Leif Sawyer <[EMAIL PROTECTED]> writes:
> > Yeah, but then you have to find the buffalo and that gets
> > hard. (Actually Linus used a carabou, but those are even
> > harder to find...)
>
> Well, I remember back to 0.12ish and the Caribou around here
> (Alaska) were plentiful then. Ah, those
On Saturday 31 March 2001 22:55, Sandy Harris wrote:
> I'm wondering whether we have or need a formalisation of how work might be
> divided in future kernels.
>
> The question I'm interested in is how the work gets split up among various
> components at different levels within a single box (not
Hi,
I'm currently running 2.4.2-ac28 and today I got a failing assumption in
sym53c8xx.c. I'm not sure about the exact steps that I did to produce
this error, but it must have been something like: cdparanoia -blank=all,
then sending Ctrl+C to this process and after it's been killed
cdparanoia
It should support both, to my knowledge (which is very limited, mind
you). I also went out to the store and purchased a new cable, which
made the driver recognize the cable correctly, whereas it did not
before. I wonder if there is not a serious deficiency in the cables
sent out with
missing for line 73 at 2.4.0
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
I'm wondering whether we have or need a formalisation of how work might be
divided in future kernels.
The question I'm interested in is how the work gets split up among various
components at different levels within a single box (not SMP with many at
the same level, or various multi-box
??
--
Mircea Damian
E-mails: [EMAIL PROTECTED], [EMAIL PROTECTED]
WebPage: http://taz.mania.k.ro/~dmircea/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi.
I managed fullowing situation: user with no ulimits will run script like
this:
#! /usr/bin/perl
while (1)
{
fork();
};
on say tty2. The processes get created pretty fast. After a short while
I supposed a single solution to this to kill all session by alt+sysrq+k,
but nothing happened.
In mailing-lists.linux-kernel, you wrote:
> I run into some major disk corruptions on my IDE disk with the new
> 2.4.3 kernel version. [ . . . ] Now I did some more testing and found
> out that the Alan Cox series of kernel patches does not show these
> problems.
Hmm, 2.4.2-ac28 and 2.4.3 have
hi!
when i enable the ultra dma 33 mode on my computer, the disk
performance goes down by around 30 % compared to normal pio mode 4. is
this a bug, or is there any solution to get this ultra dma working
correctly ? this happens with 2.4.2 and 2.4.3 ...
i have a shuttle hot-603 motherboard with
Trying to compile 2.4.3 with ipx support gives the following
net/network.o(.data+0x3e48): undefined reference to sysctl_ipx_pprop_broadcasting'
--Stephen
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info
hi!
i can`t get my smc etherpower ii working with the 2.4.3 kernel.
now i have downgraded to 2.4.2 and it works again ...
does anyone have a suggestion, what the problem is ?
daniel
this are the interesting lines from /var/log/messages:
during the bootup:
(debugging enabled in the driver)
Mar
> >I just got 2.4.3 up a running (on Abit BP6 Dual Celeron ) and
> >it reorderd my SCSI id's. Take a look. I don't like that my ZIP drive
> >becomes sda because if I ever remove it then I'll @#$% my harddrive dev
> >mappings again and have to change them again. Adaptec Driver 6.1.5
> >:-(
>
>
Hello,
I just got my first fs corruption too(2.4.3), but using reiserfs on LVM ,
and the volume group is also on IDE.
Accessing some /usr/src/linux/... file my system "hang" or just rebooted.
using reiserfsck "fixed" this for me.
I'm using the Asus A7V board, but comparable chipset, with the
Hello!
> I want to bind to non-local IP and send/receive UDP packets.
This is impossible, apparently.
> but in tcp_v4_connect:
> tmp = ip_route_connect(, nexthop, sk->saddr,
> RT_TOS(sk->ip_tos)|RTO_CONN|sk->localroute, sk->bound_dev_if);
>
I'm not overclocking. It's an ASUS A7Pro with Athlon 1000. I
had the same problem with an ASUS K7V with Athlon 700. But
the processor died after my cooler failed for 20 minutes!
BTW, how do I know if my cable is ATA100/ATA66, not only ATA66
? The manual from the A7Pro says it supports both, but
I am not sure if this applies in your case, but I was getting problems
such as this on my Abit KT7-RAID and had the correct cables, also. One
day, on a hunch after reading a post from Alan about overclocking, I
took my Athlon 750 down to 850 from 1.05 GHz and all is working great
now. If your
Armin,
It works for me:
$ uname -a
Linux frig 2.4.3 #1 Fri Mar 30 16:33:45 EST 2001 i586 unknown
$ cat /proc/scsi/scsi
Attached devices:
Host: scsi1 Channel: 00 Id: 01 Lun: 00
Vendor: IBM Model: DNES-309170W Rev: SA30
Type: Direct-AccessANSI SCSI revision: 03
Hi-
Tangential question (I think). Not for an IOCTL request 8;)
[as the JFS request last week].
[When] is it OK to use (new) IOCTLs vs. using procfs read/write?
And are there some alternative methods besides these two?
Thanks,
~Randy
> -Original Message-
> From: Linus Torvalds
On Thu, Mar 29, 2001 at 08:34:06AM -0500, Richard B. Johnson wrote:
> So, now I hooked up my lap-top, installed Windows and here I am.
> Only windows machines are allowed to access the outside world.
That is a shame. I can think of two things that might be of use under
these circumstances:
> I have a similar problem with my G450, booting into the framebuffer,
> then loading xdm and working in X, and then switching back to the
> console. I may have another detail to add in that when I switch back
> to the console from X, my monitor blanks and displays the warning
> that the
On Sun, 1 Apr 2001 02:15 +1000, john slee wrote:
> On Sat, Mar 31, 2001 at 06:44:20PM +0300, Radu Greab wrote:
> > Sorry if this is already known: on a RH 7.0 system with kernel 2.4.2
> > or 2.4.3, a select on an unconnected socket incorrectly says that the
> > socket is ready for input and
On Sat, Mar 31, 2001 at 06:44:20PM +0300, Radu Greab wrote:
> Sorry if this is already known: on a RH 7.0 system with kernel 2.4.2
> or 2.4.3, a select on an unconnected socket incorrectly says that the
> socket is ready for input and output. Of course, reading from the socket
> file descriptor
Hi,
I've never seen these trigger, but they look theoretically possible.
When processing the completion of a SCSI request in a bottom-half,
__scsi_end_request() can find all the buffers associated with the request
haven't been completed (ie. leftovers).
One question is; can this ever
Sorry if this is already known: on a RH 7.0 system with kernel 2.4.2
or 2.4.3, a select on an unconnected socket incorrectly says that the
socket is ready for input and output. Of course, reading from the socket
file descriptor returns -1 and errno is set to ENOTCONN as shown in
the strace
I didn't turn up a previous reference to this with a quick search in the
mailing list archive, so here it goes.
Compiling 2.4.3 on an Alpha processor system failed on 'init/main.c' with
'conflicting types' errors for 'pte_alloc' and 'pmd_alloc'. If I'm reading
things right, it's a discrepency
Hello!
> Hm. But comment in linux/skbuff.h says:
The comment is about more difficult case: transmit path,
where cb is used both by top level protocol and lower layers:
f.e. TCP -> IP -> device. cb is dirty from the moment of skb
creation in this case.
Also, note that the second sentence in the
>I just got 2.4.3 up a running (on Abit BP6 Dual Celeron ) and
>it reorderd my SCSI id's. Take a look. I don't like that my ZIP drive
>becomes sda because if I ever remove it then I'll @#$% my harddrive dev
>mappings again and have to change them again. Adaptec Driver 6.1.5
>:-(
Upgrade to
>hi!
>
>as in the subject, yesterday i upgraded to 2.4.3 (plain, no patches).
>add-single-device/del-single-device did not work anymore.
>
>tried with:
>
>controller: adaptec-19160
>device: yamaha-4260
Do you get any error messages? Does the problem persist with
the latest driver?
Hello!
On Fri, Mar 30, 2001 at 09:13:40PM +0400, [EMAIL PROTECTED] wrote:
> >For now I workarounded it with filling skb->cb with zeroes before
> >netif_rx(),
> This is right. For another examples look into tunnels.
Hm. But comment in linux/skbuff.h says:
/*
* This is the
>I upgraded to 2.4.3 from 2.4.1 today and I get a lot of recovery on the scsi
>bus.
>I also upgraded to the "latest" aic7xxx driver but still the sam problems.
>A typical revery in my logs.
Can you resend the recovery information after booting with "aic7xxx=verbose".
This will provide more
Hi,
Two performance changes against 2.4.3.
flush_all_zero_pkmaps() is guarding against a race which cannot happen,
and thus hurting performance.
It uses the atomic fetch-and-clear "ptep_get_and_clear()" operation,
which is much stronger than needed. No-one has the page mapped, and
On 2001-03-31T09:36:33,
James Lewis Nance <[EMAIL PROTECTED]> said:
> > > 4) What is the time frame of releasing 2.5.x-final (or 2.6.x) ?
> > wow that's jumping the gun a bit.
> But its easy to answer. It will come out about 1 year after whatever
> target date we initially set :-)
Sorry,
On Fri, Mar 30, 2001 at 07:54:44PM -0800, Joel Jaeggli wrote:
> On Thu, 29 Mar 2001, Hen, Shmulik wrote:
> > 4) What is the time frame of releasing 2.5.x-final (or 2.6.x) ?
>
> wow that's jumping the gun a bit.
But its easy to answer. It will come out about 1 year after whatever
target date we
Stephen Rothwell wrote:
> > On that theme of power management with X problems, I have been having
> > trouble with my laptop crashing when the lid is closed, instead of
> > suspending as it used to. The laptop is a Toshiba Satellite 4070CDT.
>
> Can you please try adding
> Option "NoPM"
On Sat, 31 Mar 2001, Stephen E. Clark wrote:
> Anyone know the status of mtrr the AMD Thunderbird? It does not seem to
> work for me anymore.
> reg00: base=0x ( 0MB), size=16711936MB: write-back, count=1
> Linux version 2.4.2-ac18 ([EMAIL PROTECTED]) (gcc version
James Simmons wrote:
> > > You have same toshiba satellite as me, right?
> >
> > Yes
>
> Is this the NeoMagic chipset?
No, it's the Trident Cyber9525
-- Jamie
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo
On Fri, Mar 30, 2001 at 10:17:08PM +0200, Herbert Rosmanith wrote:
>
> hi,
>
> I noticed that the option CONFIG_PARIDE_PARPORT will always be "y",
> even if CONFIG_PARIDE_PARPORT="n". I checked with kernels 2.2.18
> and 2.2.19.
>
> the file responsible is "drivers/block/Config.in", around line
On Fri, 30 Mar 2001, Scott G. Miller wrote:
> Linux 2.4.3, Debian Woody. 2.4.2 works without problems. However, in
> 2.4.3, pcnet32 loads, gives an error message:
2.4.3 (and -ac's) are also broken as guest in VMWware due to the pcnet32
changes [doing 32 bit IO on 16 bit regs on the 79C970A
hi!
as in the subject, yesterday i upgraded to 2.4.3 (plain, no patches).
add-single-device/del-single-device did not work anymore.
tried with:
controller: adaptec-19160
device: yamaha-4260
MfG,
Armin Obersteiner
--
[EMAIL PROTECTED]pgp public key on request
I run into some major disk corruptions on my IDE disk with the new
2.4.3 kernel version. I did see the same corruptions with 2.4.2
- but back then I blamed reiserfs and went back to 2.4.1.
Now I did some more testing and found out that the Alan Cox
series of kernel patches does not show these
Anyone know the status of mtrr the AMD Thunderbird? It does not seem to
work for me anymore.
cat /proc/mtrr
reg00: base=0x ( 0MB), size=16711936MB: write-back, count=1
joker:/
# echo "base=0xd400 size=0x200 type=write-combining" >|
/proc/mtrr
joker:/
# cat /proc/mtrr
reg00:
Alan Olsen writes:
> On Fri, 30 Mar 2001, Bruno Avila wrote:
>
> >I can't find this anywhere. What is the version of the tools to
> > compile linux kernel 0.0.0.1 (../Historic)? And where can i find them?
>
> Well, first you have to find a good source of obsidean, a couple of sharp
>
I upgraded to 2.4.3 from 2.4.1 today and I get a lot of recovery on the scsi
bus.
I also upgraded to the "latest" aic7xxx driver but still the sam problems.
A typical revery in my logs.
Mar 31 09:34:35 pescadero kernel: scsi0:0:4:0: Attempting to queue an ABORT
message
Mar 31 09:34:35 pescadero
I upgraded to 2.4.3 from 2.4.1 today and I get a lot of recovery on the scsi
bus.
I also upgraded to the "latest" aic7xxx driver but still the sam problems.
A typical revery in my logs.
Mar 31 09:34:35 pescadero kernel: scsi0:0:4:0: Attempting to queue an ABORT
message
Mar 31 09:34:35 pescadero
Alan Olsen writes:
On Fri, 30 Mar 2001, Bruno Avila wrote:
I can't find this anywhere. What is the version of the tools to
compile linux kernel 0.0.0.1 (../Historic)? And where can i find them?
Well, first you have to find a good source of obsidean, a couple of sharp
rocks, and
Anyone know the status of mtrr the AMD Thunderbird? It does not seem to
work for me anymore.
cat /proc/mtrr
reg00: base=0x ( 0MB), size=16711936MB: write-back, count=1
joker:/
# echo "base=0xd400 size=0x200 type=write-combining" |
/proc/mtrr
joker:/
# cat /proc/mtrr
reg00:
I run into some major disk corruptions on my IDE disk with the new
2.4.3 kernel version. I did see the same corruptions with 2.4.2
- but back then I blamed reiserfs and went back to 2.4.1.
Now I did some more testing and found out that the Alan Cox
series of kernel patches does not show these
hi!
as in the subject, yesterday i upgraded to 2.4.3 (plain, no patches).
add-single-device/del-single-device did not work anymore.
tried with:
controller: adaptec-19160
device: yamaha-4260
MfG,
Armin Obersteiner
--
[EMAIL PROTECTED]pgp public key on request
On Fri, 30 Mar 2001, Scott G. Miller wrote:
Linux 2.4.3, Debian Woody. 2.4.2 works without problems. However, in
2.4.3, pcnet32 loads, gives an error message:
2.4.3 (and -ac's) are also broken as guest in VMWware due to the pcnet32
changes [doing 32 bit IO on 16 bit regs on the 79C970A
On Fri, Mar 30, 2001 at 10:17:08PM +0200, Herbert Rosmanith wrote:
hi,
I noticed that the option CONFIG_PARIDE_PARPORT will always be "y",
even if CONFIG_PARIDE_PARPORT="n". I checked with kernels 2.2.18
and 2.2.19.
the file responsible is "drivers/block/Config.in", around line 126.
James Simmons wrote:
You have same toshiba satellite as me, right?
Yes
Is this the NeoMagic chipset?
No, it's the Trident Cyber9525
-- Jamie
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at
On Sat, 31 Mar 2001, Stephen E. Clark wrote:
Anyone know the status of mtrr the AMD Thunderbird? It does not seem to
work for me anymore.
reg00: base=0x ( 0MB), size=16711936MB: write-back, count=1
Linux version 2.4.2-ac18 ([EMAIL PROTECTED]) (gcc version
^^
Stephen Rothwell wrote:
On that theme of power management with X problems, I have been having
trouble with my laptop crashing when the lid is closed, instead of
suspending as it used to. The laptop is a Toshiba Satellite 4070CDT.
Can you please try adding
Option "NoPM"
to the
On Fri, Mar 30, 2001 at 07:54:44PM -0800, Joel Jaeggli wrote:
On Thu, 29 Mar 2001, Hen, Shmulik wrote:
4) What is the time frame of releasing 2.5.x-final (or 2.6.x) ?
wow that's jumping the gun a bit.
But its easy to answer. It will come out about 1 year after whatever
target date we
On 2001-03-31T09:36:33,
James Lewis Nance [EMAIL PROTECTED] said:
4) What is the time frame of releasing 2.5.x-final (or 2.6.x) ?
wow that's jumping the gun a bit.
But its easy to answer. It will come out about 1 year after whatever
target date we initially set :-)
Sorry, s/we
I upgraded to 2.4.3 from 2.4.1 today and I get a lot of recovery on the scsi
bus.
I also upgraded to the "latest" aic7xxx driver but still the sam problems.
A typical revery in my logs.
Can you resend the recovery information after booting with "aic7xxx=verbose".
This will provide more
hi!
as in the subject, yesterday i upgraded to 2.4.3 (plain, no patches).
add-single-device/del-single-device did not work anymore.
tried with:
controller: adaptec-19160
device: yamaha-4260
Do you get any error messages? Does the problem persist with
the latest driver?
I just got 2.4.3 up a running (on Abit BP6 Dual Celeron ) and
it reorderd my SCSI id's. Take a look. I don't like that my ZIP drive
becomes sda because if I ever remove it then I'll @#$% my harddrive dev
mappings again and have to change them again. Adaptec Driver 6.1.5
:-(
Upgrade to version
Hello!
On Fri, Mar 30, 2001 at 09:13:40PM +0400, [EMAIL PROTECTED] wrote:
For now I workarounded it with filling skb-cb with zeroes before
netif_rx(),
This is right. For another examples look into tunnels.
Hm. But comment in linux/skbuff.h says:
/*
* This is the
Hello!
Hm. But comment in linux/skbuff.h says:
The comment is about more difficult case: transmit path,
where cb is used both by top level protocol and lower layers:
f.e. TCP - IP - device. cb is dirty from the moment of skb
creation in this case.
Also, note that the second sentence in the
I didn't turn up a previous reference to this with a quick search in the
mailing list archive, so here it goes.
Compiling 2.4.3 on an Alpha processor system failed on 'init/main.c' with
'conflicting types' errors for 'pte_alloc' and 'pmd_alloc'. If I'm reading
things right, it's a discrepency
Hi,
I've never seen these trigger, but they look theoretically possible.
When processing the completion of a SCSI request in a bottom-half,
__scsi_end_request() can find all the buffers associated with the request
haven't been completed (ie. leftovers).
One question is; can this ever
On Sat, Mar 31, 2001 at 06:44:20PM +0300, Radu Greab wrote:
Sorry if this is already known: on a RH 7.0 system with kernel 2.4.2
or 2.4.3, a select on an unconnected socket incorrectly says that the
socket is ready for input and output. Of course, reading from the socket
file descriptor
On Sun, 1 Apr 2001 02:15 +1000, john slee wrote:
On Sat, Mar 31, 2001 at 06:44:20PM +0300, Radu Greab wrote:
Sorry if this is already known: on a RH 7.0 system with kernel 2.4.2
or 2.4.3, a select on an unconnected socket incorrectly says that the
socket is ready for input and output.
On Thu, Mar 29, 2001 at 08:34:06AM -0500, Richard B. Johnson wrote:
So, now I hooked up my lap-top, installed Windows and here I am.
Only windows machines are allowed to access the outside world.
That is a shame. I can think of two things that might be of use under
these circumstances:
I have a similar problem with my G450, booting into the framebuffer,
then loading xdm and working in X, and then switching back to the
console. I may have another detail to add in that when I switch back
to the console from X, my monitor blanks and displays the warning
that the frequencies
Hi-
Tangential question (I think). Not for an IOCTL request 8;)
[as the JFS request last week].
[When] is it OK to use (new) IOCTLs vs. using procfs read/write?
And are there some alternative methods besides these two?
Thanks,
~Randy
-Original Message-
From: Linus Torvalds
Armin,
It works for me:
$ uname -a
Linux frig 2.4.3 #1 Fri Mar 30 16:33:45 EST 2001 i586 unknown
$ cat /proc/scsi/scsi
Attached devices:
Host: scsi1 Channel: 00 Id: 01 Lun: 00
Vendor: IBM Model: DNES-309170W Rev: SA30
Type: Direct-AccessANSI SCSI revision: 03
I am not sure if this applies in your case, but I was getting problems
such as this on my Abit KT7-RAID and had the correct cables, also. One
day, on a hunch after reading a post from Alan about overclocking, I
took my Athlon 750 down to 850 from 1.05 GHz and all is working great
now. If your
I'm not overclocking. It's an ASUS A7Pro with Athlon 1000. I
had the same problem with an ASUS K7V with Athlon 700. But
the processor died after my cooler failed for 20 minutes!
BTW, how do I know if my cable is ATA100/ATA66, not only ATA66
? The manual from the A7Pro says it supports both, but
Hello!
I want to bind to non-local IP and send/receive UDP packets.
This is impossible, apparently.
but in tcp_v4_connect:
tmp = ip_route_connect(rt, nexthop, sk-saddr,
RT_TOS(sk-ip_tos)|RTO_CONN|sk-localroute, sk-bound_dev_if);
Hello,
I just got my first fs corruption too(2.4.3), but using reiserfs on LVM ,
and the volume group is also on IDE.
Accessing some /usr/src/linux/... file my system "hang" or just rebooted.
using reiserfsck "fixed" this for me.
I'm using the Asus A7V board, but comparable chipset, with the
I just got 2.4.3 up a running (on Abit BP6 Dual Celeron ) and
it reorderd my SCSI id's. Take a look. I don't like that my ZIP drive
becomes sda because if I ever remove it then I'll @#$% my harddrive dev
mappings again and have to change them again. Adaptec Driver 6.1.5
:-(
Upgrade to
hi!
i can`t get my smc etherpower ii working with the 2.4.3 kernel.
now i have downgraded to 2.4.2 and it works again ...
does anyone have a suggestion, what the problem is ?
daniel
this are the interesting lines from /var/log/messages:
during the bootup:
(debugging enabled in the driver)
Mar
1 - 100 of 135 matches
Mail list logo