> * Added fast-mode command to suppress side-effect computation
> on slow machines.
You could put the computation in a low-priority thread, so that it
still gets done but doesn't mess up responsiveness.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Anton Altaparmakov <[EMAIL PROTECTED]>:
> When .config is missing and error is emitted when running make menuconfig
> (or any other I guess) for the first time. Should this be the case? It's
> ignored so ok but still would be nice not to have an error.
Yes, that is the expected behavior. It
Hi,
another zinger that I am sending to LKML because I don't know where else to send it ...
I've discovered a deadly combination of kernel & lilo (and raid). This may be a pure
lilo bug, but I assume that the kernel+raid aids & abets the problem...:
I am running kernel-2.4.x. Two ide hard
In article <[EMAIL PROTECTED]> you wrote:
> Is this a pathological case because of the way fsck does business, or does the RAID
>re-sync affect any disk-bound process that severely?
i gues the seeks are the problem. fsck will quite heavyly reposition, so does
the rebuild, most likely on
In article <01041521302600.15046@tabby> you wrote:
>>a) stop rebuild until fsck is fixed
> And let fsck read bad data because the raid doesn't yet recognize the correct
> one
a degraded raid will not deliver broken data. and even if it does, one more
reason not to check a degraded raid.
>
David Findlay said once upon a time (Tue, 17 Apr 2001):
> I am using the kernel IP Accounting in Linux to record the amount of data
> transfered via my Linux internet gateway from individual IP addresses. This
> currently requires me to set up an accounting rule for each IP address that I
> want
Jamie Lokier wrote:
>
> george anzinger wrote:
> > Horst von Brand wrote:
> > >
> > > Ben Greear <[EMAIL PROTECTED]> said:
> > >
> > > [...]
> > >
> > > > Wouldn't a heap be a good data structure for a list of timers? Insertion
> > > > is log(n) and finding the one with the least time is O(1),
On Sun, 15 Apr 2001, Bernd Eckenfels wrote:
>In article <[EMAIL PROTECTED]> you wrote:
>>>(There is no config file to disable/alter this .. no work-around that I
>>>know of ..)
>
>> You can't be serious. Go sit down and think about what's going on.
>
>Well, there are two potential solutions:
>
george anzinger wrote:
>
> Horst von Brand wrote:
> >
> > Ben Greear <[EMAIL PROTECTED]> said:
> >
> > [...]
> >
> > > Wouldn't a heap be a good data structure for a list of timers? Insertion
> > > is log(n) and finding the one with the least time is O(1), ie pop off the
> > > front It can
David Findlay <[EMAIL PROTECTED]> writes:
> On Monday 16 April 2001 10:40, you wrote:
> > Perhaps I misunderstand what it is exactly you are trying to do,
> > but I would think that this could be done entirely in userland by
> > software that just adds rules for you instead of you having to do
No, one rule would be MUCH faster. What's do you think would be faster of the two:
if ((ipaddr>=3232235521)&&(ipaddr<=3232235774))
return 1;
else
return 0;
or
for (a=0;a<(3232235774-3232235521);a++)
if (ipaddr==a)
return 1;
return 0;
Obviously it compares the 192.168.0.1 -
Hi,
I recently noticed some weird behaviour in devfs.
- some symlinks not showing up in directory listings, although they
are surely existing. I noticed this with symlinks created by devfsd
for IDE devices (/dev/hda{9,10,11} showing in normal ls, other hda
entries are hidden). If I
Hi.
I hope this is the correct place to report to.
I have installed kernel 2.4.3 but my system is having a few problems
compiling things. Not all software is having problems it just seems to
be the most important ones. like mozilla or alsa-driver, I would like to
try others to test this but
On 15 Apr 2001, H. Peter Anvin wrote:
> Followup to: <[EMAIL PROTECTED]>
> By author:Amit D Chaudhary <[EMAIL PROTECTED]>
> In newsgroup: linux.dev.kernel
> >
> > On the same topic, I have not found any change in free memory
> > reported before and after the ioctl call. Though umount
Daniel, you write:
> Andreas, you wrote:
> > We should go with "EXT2_FEATURE_COMPAT_DIR_INDEX 0x0008"
> > because the on-disk layout is 100% compatible with older kernels, so
> > no reason to force read-only for those systems. I'm guessing Ted had
> > put RO_COMPAT_BTREE_DIR in there in
On Sun, 15 Apr 2001, Arthur Pedyczak wrote:
> On Sat, 14 Apr 2001, Jeff Garzik wrote:
>
> > Can you try 2.4.4-pre3?
> > ftp://ftp.us.kernel.org/pub/linux/kernel/testing/
> >
...the same thing happens in 2.4.3...
> I am testing loop behaviour in 2.4.3 and 3.4.4p3. I have noticed something
>
Followup to: <[EMAIL PROTECTED]>
By author:Amit D Chaudhary <[EMAIL PROTECTED]>
In newsgroup: linux.dev.kernel
>
> On the same topic, I have not found any change in free memory
> reported before and after the ioctl call. Though umount /initrd does
> free around 2 MB.
>
With Scott's patch
Followup to: <[EMAIL PROTECTED]>
By author:Scott Murray <[EMAIL PROTECTED]>
In newsgroup: linux.dev.kernel
>
> Indeed it is. This fix for drivers/block/rd.c (excerpted from 2.4.3-ac6):
>
This did the trick. I bounced the patch to Linus, too.
-hpa
--
<[EMAIL PROTECTED]> at
On Tue, Apr 17, 2001 at 08:46:12AM +1000, David Findlay wrote:
> On Monday 16 April 2001 10:40, you wrote:
> > Perhaps I misunderstand what it is exactly you are trying to do,
> > but I would think that this could be done entirely in userland by
> > software that just adds rules for you instead
In article <[EMAIL PROTECTED]> you wrote:
>>(There is no config file to disable/alter this .. no work-around that I
>>know of ..)
> You can't be serious. Go sit down and think about what's going on.
Well, there are two potential solutions:
a) stop rebuild until fsck is fixed
b) wait with fsck
On Sat, 14 Apr 2001, Jeff Garzik wrote:
> Can you try 2.4.4-pre3?
> ftp://ftp.us.kernel.org/pub/linux/kernel/testing/
>
I am testing loop behaviour in 2.4.3 and 3.4.4p3. I have noticed something
disturbing:
I can mount the same file on the same mountpoint more than once. If I
mount a file twice
On Tue, 17 Apr 2001, David Findlay wrote:
>> Perhaps I misunderstand what it is exactly you are trying to do,
>> but I would think that this could be done entirely in userland by
>> software that just adds rules for you instead of you having to do
>> it manually.
>
>I suppose, but it would be so
On Monday 16 April 2001 10:40, you wrote:
> Perhaps I misunderstand what it is exactly you are trying to do,
> but I would think that this could be done entirely in userland by
> software that just adds rules for you instead of you having to do
> it manually.
I suppose, but it would be so much
On Tue, 17 Apr 2001, David Findlay wrote:
>I am using the kernel IP Accounting in Linux to record the amount of data
>transfered via my Linux internet gateway from individual IP addresses. This
>currently requires me to set up an accounting rule for each IP address that I
>want to record
> In the 2.5 series of kernels, working towards 2.6, could you please make the
> IP Accounting so that I can set a single rule that will make it watch all IP
> traffic going from the local network, through the masquerading service to the
> internet, and log local IP Addresses using it? This would
> If you have the diffs ready then it would be great if you could do that.
> (Did the maxbytes stuff enter the mainstream kernel yet? Are you going to
> feed them together? Or will that be dropped for now?)
maxbytes got to Linus. The checks using it are not all there, but maxbytes
went in
At 19:33 15/04/2001, Eric S. Raymond wrote:
>The latest version is always available at http://www.tuxedo.org/~esr/cml2/
>Release 1.1.2: Sun Apr 15 14:26:07 EDT 2001
> * Synchronized with 2.4.4-pre3.
> * Screen flicker in menuconfig is gone.
> * KEY_HOME and KEY_END now go
At 23:11 15/04/2001, Alan Cox wrote:
> > Can the numerous ntfs fixes in the -ac series be applied to the mainstream
> > kernel instead? Thanks.
>
>Want me to feed them to Linus or will you do it ?
If you have the diffs ready then it would be great if you could do that.
(Did the maxbytes stuff
At 18:59 15/04/2001, Eric S. Raymond wrote:
>Anton Altaparmakov <[EMAIL PROTECTED]>:
> > At 18:56 14/04/2001, Eric S. Raymond wrote:
> > >Anton Altaparmakov <[EMAIL PROTECTED]>:
> > > > I found a bug: In "Intel and compatible 80x86 processor options",
> "Intel
> > > > and compatible 80x86
I am using the kernel IP Accounting in Linux to record the amount of data
transfered via my Linux internet gateway from individual IP addresses. This
currently requires me to set up an accounting rule for each IP address that I
want to record accounting info for. If I had 200 machines to
Hello,
I have a problem with the 3dfx framebuffer since 2.4.4-pre1.
I have the following append line in my lilo.conf:
append = "video=tdfx:1280x1024-8@76"
This setting works fine for the 2.4.[0-3] kernels.
When I boot the box, the little penguin on the top left side is unrecognizable.
When I
> Can the numerous ntfs fixes in the -ac series be applied to the mainstream
> kernel instead? Thanks.
Want me to feed them to Linus or will you do it ?
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info
On Sun, 15 Apr 2001, Manfred Spraul wrote:
> Alan, which fix would you prefer:
> * init could use wait3 and set __WALL.
> * all kernel thread users could set SIGCHLD. Some already do that
> (__call_usermodehelper).
> * the kernel_thread implementations could force the exit signal to
> SIGCHLD.
Ok, I've gotten both NICs to work thanks to the help from you guys.
Basically, what you have to do is disable all the packet filtering stuff
with exception to the minimal requirements to select ipchains. And also
I disabled modular install and built in install for every nic card but
the ones I
[Warning: historical reference ahead.]
> > I'd appreciate it if some of you with slow machines would try running
> > with fast mode on and seeing if that addresses the sluggishness.
>
> I assume that, eventually there will be no slow mode or fast mode
> distinction... just a single fast mode.
> And the problem is that this hits a fast path in the classical news spool
> layout article create path. The code for this assumes that you have
> articles in the range X to Y, and you just got a new article, so you write
> a file called /var/spool/news/group/name/Y+1. You really do not want to
On Sat, Apr 14, 2001 at 04:42:54PM +0200, Kurt Roeckx wrote:
> While running 2.4.3, I saw the following message a few times:
>
> KERNEL: assertion (tp->lost_out == 0) failed at
> tcp_input.c(1202):tcp_remove_reno_sacks
Nobody seems to be intrested in fixing this bug?
Anyway, I was looking at
On the same topic, I have not found any change in free memory reported before
and after the ioctl call. Though umount /initrd does free around 2 MB.
Amit
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info
On Sun, 15 Apr 2001, Rogier Wolff wrote:
> Anton Altaparmakov wrote:
> > >Also, the "start" value that is read from the record, could be much
> > larger than expected, which could lead to accessing random data. The
> > fixup should fail then, and this is also patched below.
> >
> > No it can't
Hi,
Mark Hounschell wrote:
> I'm not a list member so IF you respond to this mail please CC me.
> I've been looking at the archives and see some problems with the 2.3.x
> kernel versions and affs support.
I've put a new version at
http://www.xs4all.nl/~zippel/affs.010414.tar.gz
bye, Roman
-
In list.kernel, linas wrote:
>
>First problem: In kernel-2.4.2 and earlier, if the machine is not cleanly
>shut down, then upon reboot, RAID reconstruction is automatically started.
>(For RAID-1, this more-or-less ammounts to copying the entire contents
>of one disk partition on one disk to
Andreas, you wrote:
> Daniel, you write:
> > So then, the obvious candidate would be:
> >
> > #define EXT2_FEATURE_RO_COMPAT_DIR_INDEX0x0004
> >
> > which was formerly EXT2_FEATURE_RO_COMPAT_BTREE_DIR.
>
> Actually not. We should go with "EXT2_FEATURE_COMPAT_DIR_INDEX 0x0008"
>
Hi,
I've posted about performance problems with my RAID0 setup.
RAID works fine, but it's too slow.
But now it seems not to be a problem with the md code, it's an ide problem.
There are two HDs in my PC: /dev/hda and /dev/hdc. No other devices are
attached to the ide-bus.
PC is a SMP-System, 2
On Sunday 15 April 2001 12:33, Eric S. Raymond wrote:
> The latest version is always available at http://www.tuxedo.org/~esr/cml2/
>
> Release 1.1.2: Sun Apr 15 14:26:07 EDT 2001
> * Synchronized with 2.4.4-pre3.
> * Screen flicker in menuconfig is gone.
> * KEY_HOME and KEY_END
The latest version is always available at http://www.tuxedo.org/~esr/cml2/
Release 1.1.2: Sun Apr 15 14:26:07 EDT 2001
* Synchronized with 2.4.4-pre3.
* Screen flicker in menuconfig is gone.
* KEY_HOME and KEY_END now go to top or bottom of menu.
* Zack Weinberg's
On 14 Apr 2001, H. Peter Anvin wrote:
> Hello friends,
>
> I am trying the following setup, and it works beautifully, *except*
> that I don't seem to be able to free the ramdisk memory at the end.
Heh, sounds familiar, I was in exactly the same situation a month ago.
I meant to post something
Hi,
I want to report a trio of raid-related problems. The third one is
very serious, and effectively prevents 2.4.3 from being usable (by me).
First problem: In kernel-2.4.2 and earlier, if the machine is not cleanly
shut down, then upon reboot, RAID reconstruction is automatically started.
Anton Altaparmakov wrote:
> >Also, the "start" value that is read from the record, could be much
> larger than expected, which could lead to accessing random data. The
> fixup should fail then, and this is also patched below.
>
> No it can't (in theory). The volume would be corrupt if it was.
Anton Altaparmakov <[EMAIL PROTECTED]>:
> At 18:56 14/04/2001, Eric S. Raymond wrote:
> >Anton Altaparmakov <[EMAIL PROTECTED]>:
> > > I found a bug: In "Intel and compatible 80x86 processor options", "Intel
> > > and compatible 80x86 processor types" I press "y" on "Pentium Classic"
> > > option
Francois Cami wrote:
>
> hi Matthew and everyone
>
> I use a 3COM Etherlink III ISA and a 3C905C PCI in my firewall
> box (i440BX mobo). (distro is slackware 7.1, kernels are either
> 2.2.19 or 2.4.3, modutils 2.3.1 (slackware 7.1 default) ).
>
> The 3C905C was never a problem (and i guess
On Sat, 14 Apr 2001, Dan Podeanu wrote:
> On 13 Apr 2001, Doug McNaught wrote:
>
> > Alan Cox <[EMAIL PROTECTED]> writes:
> >
> > > > Here might be one of the resons for the trouble with VIA chipsets:
> > > >
> > > > http://www.theregister.co.uk/content/3/18267.html
> > > >
> > > > Some DMA
hi Matthew and everyone
I use a 3COM Etherlink III ISA and a 3C905C PCI in my firewall
box (i440BX mobo). (distro is slackware 7.1, kernels are either
2.2.19 or 2.4.3, modutils 2.3.1 (slackware 7.1 default) ).
The 3C905C was never a problem (and i guess your R8029 isn't either),
however to
"Mr. Shannon Aldinger" <[EMAIL PROTECTED]> writes:
|> On Sun, 15 Apr 2001, it was written:
|>
|> > elfie:~ # uname -p
|> > unknown
|> >
|> > elfie:~ # uname -a
|> > Linux elfie 2.4.3 #1 Fri Apr 13 21:08:29 CEST 2001 i586 unknown
|> >
|> I get the same on my Sun Ultra 1, and various x86 boxes.
>
>
> George, while this is needed as pointed out in a previous message,
> due to non-contiguous physical IDs, I think the current usage is
> pretty bad (at least looking from a x86 perspective). Maybe somebody
> can chime in from a different architecture.
>
> I think that all data accesses
Linus, Alan,
Please do not apply this patch as both the comment and the code are wrong
and unnecessary, respectively.
Can the numerous ntfs fixes in the -ac series be applied to the mainstream
kernel instead? Thanks.
Rogier and everyone doing any NTFS work, please use -ac series kernels as
Try the following patch to linux/kernel/Makefile. If it works fine let me
know and we can get it into the standard tree.
MS: (n) 1. A debilitating and surprisingly widespread affliction that
renders the sufferer barely able to perform the simplest task. 2. A disease.
James Simmons [[EMAIL
> [One of the things for 2.5 is 15- or 31-bit keycodes.
> The 7-bits we have today do no longer suffice. I have a 132-key keyboard.]
Or for 2.5.X you could use EVIOCGKEYCODE or EVIOCSKEYCODE using
/dev/eventX. Also the input api supports up to 220 different keys and
could support up to 255. If
>tar cvf - . | gzip -9 | dd of=/dev/tapes/tape0 bs=32k
I have a tool which compresses individual files in a tar archive
instead of the whole archive[1]. That one tries hard to write only in
standard 10kb blocks to emulate tar's behavior towards the drive.
I'll try in a few days (when I'm
>Daniel Phillips wrote:
> > Jamie Lokier wrote:
> > > Daniel Phillips wrote:
> > > > ls already can't handle the directories I'm working with on a regular
> > > > basis. It's broken and needs to be fixed. A merge sort using log n
> > > > temporary files is not hard to write.
> > >
> > > ls -U |
Hello,
On Sun, 15 Apr 2001, Jens Axboe wrote:
> On Sun, Apr 15 2001, Arjan Filius wrote:
> > Hello,
> >
> > While trying kernel 2.4.4-pre3 i found a "hanging" swapon (my swap is on
> > LVM), same effect for "mount -a". 2.4.3 works properly.
> >
> > I found ./drivers/md/lvm.c is patched, and
Hey, Thanks for all the help everyone. So far this is my exact
configuration:
Two NICs, 3COM Etherlink III ISA, Realtek 8029 PCI (Covered by the
NE2000 PCI module). Both cards are setup for PnP, the modules have been
built into the kernel. (It worked in my old version with them build into
the
Anton Altaparmakov <[EMAIL PROTECTED]>:
> Much better now! make xconfig still seems to be the old way (hadn't tried
> it before)? - At least I get two shades of green. The lighter one is
> completely unreadable on the silver background. Could I suggest to get rid
> of the light/dark green
Several web sites have stoped working recently about the time I upgraded to
2.4.2 - 2.4.3. Some testing at one site showed it doesn't respond to pings
except for an occasional reply reported as "admin prohibited filter" by
tcpdump or as "packet filtered" by ping. The kernel doesn't have tcp_ecn
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sun, 15 Apr 2001, it was written:
> elfie:~ # uname -p
> unknown
>
> elfie:~ # uname -a
> Linux elfie 2.4.3 #1 Fri Apr 13 21:08:29 CEST 2001 i586 unknown
>
I get the same on my Sun Ultra 1, and various x86 boxes. I'm sure this is
normal, I'm just
>
> > Is there any information that would be helpful to the kernel
> > developers that I might be able to provide or is this a known issue
> > that is currently being worked out?
>
> I never heard about this problem. What would be helpful is to
> send a few minutes' (a full 'load cycle'?) worth
On Sun Apr 15 2001, joker wrote:
> i have this problem using intel 850mhz and 333mhz
> any know where to get update version of uname ?
http://www.tuxfinder.com
Btw:
elfie:~ # uname --version
uname (GNU sh-utils) 2.0.11
Written by David MacKenzie.
Copyright (C) 2000 Free Software Foundation,
On Sat, 14 Apr 2001, George Bonser wrote:
> 2.4.4pre3 works, sorta, but is very "pumpy". The load avg will go up to
> about 60, then drop, then climb again, then drop. It will vary from very
> sluggish performance to snappy and back again to sluggish.
So it's stable ;))
> With 2.2 kernels I
>Agreed. The only thing I was thinking, was if the kernel is doing the
>right thing now, it shouldn't be forced to work around a bug in XFree.
>By not "fixing" the kernel, the XFree team would be forced to do the
>right thing.
Ha Ha Ha. That is funny. Okay it does get fixed many many months
On Sun, Apr 15 2001, Arjan Filius wrote:
> Hello,
>
> While trying kernel 2.4.4-pre3 i found a "hanging" swapon (my swap is on
> LVM), same effect for "mount -a". 2.4.3 works properly.
>
> I found ./drivers/md/lvm.c is patched, and restoring the lvm.c from 2.4.3
> resulted in normal operation.
On Sun, Apr 15 2001, [EMAIL PROTECTED] wrote:
> DOH! You're right.
>
> I can now write to it, but only get one chance. Copy a file to
> DVDRAM, read, print, etc, but when I try to rm or mv, segfault.
> Foreverafter the DVDRAM is 'busy'. Cannot umount. Must reboot then
> umount. Remount, get
Is this a HD44780 LCD? Geert wrote a console driver sometime ago for this.
He had a driver for it. If he still doesn't I have a copy of the code.
MS: (n) 1. A debilitating and surprisingly widespread affliction that
renders the sufferer barely able to perform the simplest task. 2. A disease.
DOH! You're right.
I can now write to it, but only get one chance. Copy a file to DVDRAM, read, print,
etc, but when I try to rm or mv, segfault. Foreverafter the DVDRAM is 'busy'. Cannot
umount. Must reboot then umount. Remount, get another write, but on subsequent
write, segfault.
I
On Sat, Apr 14, 2001 at 11:58:41AM -0400, jeff millar wrote:
> Selecting IP_NF_COMPAT_IPCHAINS turns off IP_NF_CONNTRACK and friends. But,
> I think CML1, allowed both support to the new iptables and compatibility
> modes to allow old ipchains scripts to work with the new kernel.
Only as
I found the problem:
* init uses waitpid(-1,,), thus the __WALL flag is not set
* without __WALL, only processes with exit_signal == SIGCHLD are reaped
* it's impossible for user space processes to die with another
exit_signal, forget_original_parent changes the exit_signal back to
SIGCHLD ("We
Jeff Garzik <[EMAIL PROTECTED]>:
> I assume that, eventually there will be no slow mode or fast mode
> distinction... just a single fast mode. Right? :)
That's an interesting question to which I do not yet know the answer.
I am continuing to speed-tune.
--
Hi all,
I am studying an NTFS problem, and came across the NTFS fixup mechanism.
It took me much too long to understand the fixup mechanism, even though
a comment tried to explain it. So I rewrote the comment.
Also, the "start" value that is read from the record, could be much
larger than
Warning: No kernel related stuff inside.
[EMAIL PROTECTED] (Rik van Riel) wrote on 26.03.01 in
<[EMAIL PROTECTED]>:
> On Mon, 26 Mar 2001, John Cowan wrote:
> > In fact this has come up before: in Usenet software, which has to
> > differentiate between an article and a sub-newsgroup. An
> as I did the previous kernel. They were the NE2000 PCI module and the
> 3C59X module. The two NICs I have are: Realtek 8029 PCI, 3COM Etherlink
> III ISA. Both are PNP, the etherlink is NOT the one with the b extention
> at the end.
Make sure you use either the kernel or the usermode PnP and
Hi,
On Sat, 14 Apr 2001, Marcelo Tosatti wrote:
> There is a nasty race between shmem_getpage_locked() and
> swapin_readahead() with the new shmem code (introduced in 2.4.3-ac3
> and merged in the main tree in 2.4.4-pre3):
>
> shmem_getpage_locked() finds a page in the swapcache and moves it to
On Sat, Apr 14, 2001 at 09:35:46PM -0400, Pete Zaitcev wrote:
> > usb-uhci.c: interrupt, status 3, frame# 1876
>
> This is a known problem, here is the discussion that I initiated
> on linux-usb-devel:
>
> http://marc.theaimsgroup.com/?t=9860950851=2=1
>
> The right fix is to comment
Hello,
While trying kernel 2.4.4-pre3 i found a "hanging" swapon (my swap is on
LVM), same effect for "mount -a". 2.4.3 works properly.
I found ./drivers/md/lvm.c is patched, and restoring the lvm.c from 2.4.3
resulted in normal operation.
I Found LVM/0.9.1_beta7 makes some notes about the
At 18:56 14/04/2001, Eric S. Raymond wrote:
>Anton Altaparmakov <[EMAIL PROTECTED]>:
> > I found a bug: In "Intel and compatible 80x86 processor options", "Intel
> > and compatible 80x86 processor types" I press "y" on "Pentium Classic"
> > option and it activates Penitum-III as well as Pentium
At 04:45 15/04/2001, Eric S. Raymond wrote:
>Release 1.1.1: Sat Apr 14 23:41:34 EDT 2001
> * The old menuconfig shortcut that 'm' in a boolean entry field
> sets 'y' is now implemented.
> * Simplified color scheme.
Much better now! make xconfig still seems to be the old
On Fri, Apr 13, 2001 at 07:52:44AM +0100, Athanasius wrote:
>Seems like anytime I first startup mozilla I end up with something
> like:
[snip]
>I'll sometime if I can remember to run mozilla with a strace -f -ff
> -o file to see if it gives any more useful info. I'll be updating to
>
The attached patch, against kernel 2.4.4-pre3, adds a feature I call
"3rd-party support."
When vendors put additional kernel modules and drivers in their kernel
package, typically they do so via a patch. For the case where totally
new file(s) are added to a kernel, this results in patch
Dear All :
I wrote a small module to print "hello world " . when I comiple it under kernel
2.2 , everything works fine.
the output " printk unsolve " appear under 2.4.2 .
with kernel 2.2. , I can find "printk " in the /proc/ksyms , but
with kernel 2.4.2 , only "printk_Rsmp" symbol .
Does
The attached patch does two things:
1) Take PCI devices to D0 state before enabling them. We both think
this is the right thing to do, but there is always the crazy chance this
change will break something. So, think twice before applying, but IMHO
apply :)
2) Adds pci_disable_device. Right
On Sun, 15 Apr 2001, Jeff Garzik wrote:
> Swivel wrote:
> >
> > drivers/char/char.c, line 247
> > create_proc_read_entry() is called regardless of the definition of
> > CONFIG_PROC_FS, simply wrap call with #ifdef CONFIG_PROC_FS and #endif.
>
> create_proc_read_entry exists, as a static
Swivel wrote:
>
> drivers/char/char.c, line 247
> create_proc_read_entry() is called regardless of the definition of
> CONFIG_PROC_FS, simply wrap call with #ifdef CONFIG_PROC_FS and #endif.
create_proc_read_entry exists, as a static inline no-op, without
CONFIG_PROC_FS.
Typically you want to
I installed that, it fixed my one NIC... The 3COM. Or I assume it did, because
it shows up in ifconfig now, unlike the other one Unfortunately I still can't
ping the local host (destination net unreachable). I think that might just be a
byproduct of my main external card not working. Anyway, I
drivers/char/char.c, line 247
create_proc_read_entry() is called regardless of the definition of
CONFIG_PROC_FS, simply wrap call with #ifdef CONFIG_PROC_FS and #endif.
Cheers,
Vito Caputo
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
I had the same problem when i upgraded to 2.4.2.
Upgrading to the latest modutils
(ftp://ftp.kernel.org/pub/linux/utils/modutils/v2.4/modutils-2.4.5.tar.gz)
should get you going again.
~Jarrod
On Sun, 15 Apr 2001, Matthew W. Lowe wrote:
> I just tried to upgrade from whatever kernel comes
Jeff Garzik wrote:
> "Matthew W. Lowe" wrote:
> > I just tried to upgrade from whatever kernel comes with redhat to 2.4.3.
> > The build, install and such was smooth. When I got to starting up,
> > everything appeared to work, until it got to my NIC cards. Neither of
> > them loaded properly.
Roger Larsson wrote:
>
> On Thursday 12 April 2001 23:52, Andre Hedrick wrote:
> > Okay but what will be used for a base for hardware that has critical
> > timing issues due to the rules of the hardware?
> >
> > I do not care but your drives/floppy/tapes/cdroms/cdrws do:
> >
> > /*
> > *
"Matthew W. Lowe" wrote:
> I just tried to upgrade from whatever kernel comes with redhat to 2.4.3.
> The build, install and such was smooth. When I got to starting up,
> everything appeared to work, until it got to my NIC cards. Neither of
> them loaded properly. I've built in the EXACT same
Dear All :
this question suppose not posted in the mailing list,since I have been posted
it on GNU compiler mailing list , and get no reponse. I posted it here to get
your help .
We licence MIPS CPU without MAC (the module support multiplication and division
functions).
For the convenience
I just tried to upgrade from whatever kernel comes with redhat to 2.4.3.
The build, install and such was smooth. When I got to starting up,
everything appeared to work, until it got to my NIC cards. Neither of
them loaded properly. I've built in the EXACT same module for the NICs
as I did the
Hello friends,
I am trying the following setup, and it works beautifully, *except*
that I don't seem to be able to free the ramdisk memory at the end.
This is using the 2.4.3 stock kernel:
I load an initrd in "non-initrd" mode:
label single
kernel vmlinuz
append
Followup to: <[EMAIL PROTECTED]>
By author:Jan Dvorak <[EMAIL PROTECTED]>
In newsgroup: linux.dev.kernel
>
> On Sat, Apr 14, 2001 at 12:21:20AM +0200, Guest section DW wrote:
> > No, these codes cannot be larger than 127 today.
> > You can use the utility setkeycodes to assign keycodes to
Followup to: [EMAIL PROTECTED]
By author:Jan Dvorak [EMAIL PROTECTED]
In newsgroup: linux.dev.kernel
On Sat, Apr 14, 2001 at 12:21:20AM +0200, Guest section DW wrote:
No, these codes cannot be larger than 127 today.
You can use the utility setkeycodes to assign keycodes to these keys.
1 - 100 of 196 matches
Mail list logo
