> tl;dr: Have installed Dave Hansen's patch as requested, rebooted.
>Now it's a matter of waiting for lockup...
Well, the machine locked up again; it looks like Dave Hansen's patch
isn't the whie story. Too bad I'm away from the office and can't get
at the console right now.
I'll get the
On Fri, Nov 23, 2012 at 03:52:58PM +, Lee Jones wrote:
> On Wed, 14 Nov 2012, Lee Jones wrote:
>
> > Now we can register the BU21013_ts touch screen when booting with
> > Device Tree enabled. Here we parse all the necessary components
> > previously expected to be passed from platform data.
>
Hi Lee,
On Thu, Nov 22, 2012 at 12:10:30PM +, Lee Jones wrote:
>
> /**
> + * bu21013_gpio_board_init() - configures the touch panel
> + * @reset_pin: reset pin number
> + *
> + * This function is used to configure the voltage and
> + * reset the touch panel controller.
> + */
> +static int
My patch:
>> This driver would not compile if ARM_AMBA is selected under x86,
>> because "CS" and "DS" are already defined there. But AMBA
>> is used in the x86 world by a PCI-to-AMBA bridge, to be submitted.
>>
>> The patch just adds the "PL330_" prefix to all register and bit fields,
>> so it ca
Dear Jason Cooper,
On Fri, 23 Nov 2012 21:39:42 -0500, Jason Cooper wrote:
> > + pinctrl: pinctrl@d0200 {
> > + compatible = "marvell,dove-pinctrl";
> > + reg = <0xd0200 0x10>;
> > + clocks = <&gate_clk 22>;
>
> The above line broke
On Thu, Nov 22, 2012 at 3:27 AM, Eric W. Biederman
wrote:
> "H. Peter Anvin" writes:
>
>> Quite certain something depends on it.
>
> It would not surprise me at all that there is a dependency, if we have
> not had a better way to report the 64bit entry point. I just wanted to
> make the context
> Subject: [PATCH 17/24] MAINTAINERS: fix Documentation/mei/
>
> The documentation was moved to Documentation/misc-devices/mei/
> instead.
>
> Cc: Tomas Winkler
> Signed-off-by: Cesar Eduardo Barros
ACK
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body o
Currently when none of CONFIG_NET_DSA_TAG_DSA, CONFIG_NET_DSA_TAG_EDSA and
CONFIG_NET_DSA_TAG_TRAILER is defined, we get following compilation warnings:
net/dsa/slave.c:51:12: warning: 'dsa_slave_init' defined but not used
[-Wunused-function]
net/dsa/slave.c:60:12: warning: 'dsa_slave_open' defin
On 24 November 2012 06:23, Davide Ciminaghi wrote:
> From: Alessandro Rubini
>
> This driver would not compile if ARM_AMBA is selected under x86,
> because "CS" and "DS" are already defined there. But AMBA
> is used in the x86 world by a PCI-to-AMBA bridge, to be submitted.
>
> The patch just ad
On 11/23/2012 07:49 PM, Yuhong Bao wrote:
+ * Specifically, cr4 exists if and only if CPUID exists,
+ * which in turn exists if and only if EFLAGS.ID exists.
This may be true for *Intel* 486 CPUs as VME was implemented at the same time
as CPUID, but I am not sure that it is true for AMD 486 CPU
If fail to migrate thp(due to unsuccessful isolation), and if the original
pmd entry is changed after reaquiring page table lock, it is unsafe to
release the page lock as page maybe unstable.
It is fixed by raising extra page count before trying migration.
Signed-off-by: Hillf Danton
---
--- a/
Free newly allocated thp if fail to isolate the old.
Signed-off-by: Hillf Danton
---
--- a/mm/migrate.c Fri Nov 23 21:29:40 2012
+++ b/mm/migrate.c Fri Nov 23 22:52:06 2012
@@ -1624,8 +1624,10 @@ int migrate_misplaced_transhuge_page(str
goto out_dropref;
isolat
A thp contributes 512 times more than a regular page to numa fault stats,
so deserves its own vm event counter. THP migration is also accounted.
[A duplicated computation of page node idx is cleaned up]
Signed-off-by: Hillf Danton
---
--- a/include/linux/vm_event_item.h Fri Nov 23 21:24:12
> + * Specifically, cr4 exists if and only if CPUID exists,
> + * which in turn exists if and only if EFLAGS.ID exists.
This may be true for *Intel* 486 CPUs as VME was implemented at the same time
as CPUID, but I am not sure that it is true for AMD 486 CPUs.
Yuhong Bao
On Mon, Nov 19, 2012 at 10:39:55AM +0100, Sebastian Hesselbarth wrote:
> Following the ongoing conversion of Orion SoCs to DT, make use of
> gpio and pinctrl drivers through DT. The main dtsi for Dove is prepared
> to allow board specific descriptors to make use of pinctrl muxing.
>
> Signed-off-b
On Sat, 2012-11-24 at 10:23 +0800, Ian Kent wrote:
> On Fri, 2012-11-23 at 15:30 +0100, Miklos Szeredi wrote:
> > Ian Kent writes:
> >
> > > On Fri, 2012-11-23 at 11:45 +0800, Ian Kent wrote:
> > >> On Thu, 2012-11-22 at 17:24 +0100, Miklos Szeredi wrote:
> > >> > Patches were tested by the custo
On Fri, 2012-11-23 at 15:30 +0100, Miklos Szeredi wrote:
> Ian Kent writes:
>
> > On Fri, 2012-11-23 at 11:45 +0800, Ian Kent wrote:
> >> On Thu, 2012-11-22 at 17:24 +0100, Miklos Szeredi wrote:
> >> > Patches were tested by the customer.
> >> >
> >> > Ian, Eric, do these patches look OK?
> >>
This patch fix the abnormal ramp delay setting.
The shift operation was wrong.
Signed-off-by: Sangbeom Kim
---
drivers/regulator/s2mps11.c | 10 +-
1 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c
index 85fc086..bd
On Sat, Nov 24, 2012 at 9:27 AM , Cesar Eduardo Barros wrote:
> I am guessing that this was a typo for rtc-s3c. Please NACK this patch
> if I am wrong.
rtc-sec and rtc-s3c is different one.
rtc-sec is driver of Samsung mfd.
Rtc-s3c is driver of Samsung SoC.
Currently, We had just done rtc-sec co
Cesar Eduardo Barros wrote:
>
> These files were merged into plat-samsung.
>
> Cc: Ben Dooks
> Cc: Kukjin Kim
Acked-by: Kukjin Kim
Thanks.
Best regards,
Kgene.
--
Kukjin Kim , Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
> Cc: linux-arm-ker...@lists.infradea
On 2012-11-23 18:44, Tang Chen wrote:
> From: Yasuaki Ishimatsu
>
> If system can create movable node which all memory of the
> node is allocated as ZONE_MOVABLE, setup_node_data() cannot
> allocate memory for the node's pg_data_t.
> So when memblock_alloc_nid() fails, setup_node_data() retries
>
From: Alessandro Rubini
This driver would not compile if ARM_AMBA is selected under x86,
because "CS" and "DS" are already defined there. But AMBA
is used in the x86 world by a PCI-to-AMBA bridge, to be submitted.
The patch just adds the "PL330_" prefix to all register and bit fields,
so it can
Em 23-11-2012 22:26, Cesar Eduardo Barros escreveu:
Moved to fs/ext3/ext3.h by commit 4613ad1 (ext3: move headers to
fs/ext3/).
Cc: linux-e...@vger.kernel.or
Typo here (in fact a copy-paste error). Should be
Cc: linux-e...@vger.kernel.org
--
Cesar Eduardo Barros
ces...@cesarb.net
cesar.bar..
This file was moved to arch/arm/mach-rpc/time.c by commit a1be5d6 (ARM:
riscpc: move time-acorn.c to mach-rpc), and the pattern for
arch/arm/mach-rpc/ already exists.
Cc: Russell King
Cc: linux-arm-ker...@lists.infradead.org
Signed-off-by: Cesar Eduardo Barros
---
MAINTAINERS | 1 -
1 file chan
This driver was never at dvb-usb-v2, as far as I could see.
Cc: Michael Krufky
Cc: linux-me...@vger.kernel.org
Signed-off-by: Cesar Eduardo Barros
---
MAINTAINERS | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index c382ff9..0488d14 100644
--- a/MA
This driver was removed by commit 1c3a918 (ARM: clps711x: Remove board
support for CEIVA).
Cc: Christopher Hoover
Cc: Christopher Hoover
Signed-off-by: Cesar Eduardo Barros
---
MAINTAINERS | 6 --
1 file changed, 6 deletions(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index 0488d14..7f80f95
This file was moved to include/linux/platform_data/dma-atmel.h by commit
7cdc39e (ARM: at91: move platform_data definitions).
Cc: Nicolas Ferre
Cc: linux-arm-ker...@lists.infradead.org
Signed-off-by: Cesar Eduardo Barros
---
MAINTAINERS | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
dif
Cc: Tony Prisk
Cc: linux-arm-ker...@lists.infradead.org
Signed-off-by: Cesar Eduardo Barros
---
MAINTAINERS | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index 9bdd5f3..c67b991 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1232,7 +1232,7 @@ F:
These files were merged into plat-samsung.
Cc: Ben Dooks
Cc: Kukjin Kim
Cc: linux-arm-ker...@lists.infradead.org
Cc: linux-samsung-...@vger.kernel.org
Signed-off-by: Cesar Eduardo Barros
---
MAINTAINERS | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/MAINTAINERS b/MAINTA
This patch series attempts to fix F: patterns on the MAINTAINERS file
which point to non-existing files or directories.
Patch 7 also attempts to add matching uapi/ patterns to all include
directory patterns, if applicable.
Cesar Eduardo Barros (24):
MAINTAINERS: remove drivers/platform/msm/
M
Added by commit 8a5700c (add drivers/platform/msm to MSM subsystem) in
2011, but I could not find any trace of that directory being ever added
to the repository.
Cc: Kenneth Heitke
Cc: David Brown
Cc: Daniel Walker
Cc: Bryan Huntsman
Cc: linux-arm-...@vger.kernel.org
Signed-off-by: Cesar Eduar
This file was moved to include/linux/platform_data/video-imxfb.h by
commit 82906b1 (ARM: imx: move platform_data definitions).
Cc: Sascha Hauer
Cc: linux-fb...@vger.kernel.org
Cc: linux-arm-ker...@lists.infradead.org
Signed-off-by: Cesar Eduardo Barros
---
MAINTAINERS | 2 +-
1 file changed, 1
This directory was removed by commit 89ae7d7 (hv: storvsc: Move the
storage driver out of the staging area).
Cc: K. Y. Srinivasan
Cc: Haiyang Zhang
Cc: de...@linuxdriverproject.org
Cc: Greg Kroah-Hartman
Signed-off-by: Cesar Eduardo Barros
---
MAINTAINERS | 1 -
1 file changed, 1 deletion(-)
This directory was moved to drivers/net/ieee802154/ by commit 31d178b
(drivers/ieee802154: move ieee802154 drivers to net folder).
Cc: Alexander Smirnov
Cc: Dmitry Eremin-Solenikov
Cc: linux-zigbee-de...@lists.sourceforge.net
Signed-off-by: Cesar Eduardo Barros
---
MAINTAINERS | 2 +-
1 file c
These files were removed by commit 1a8359e (x86/mid: Remove Intel
Moorestown).
Cc: Alan Cox
Cc: Len Brown
Cc: linux...@vger.kernel.org
Signed-off-by: Cesar Eduardo Barros
---
MAINTAINERS | 6 --
1 file changed, 6 deletions(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index 3a09993..e7a2349 1
Added by commit 200efed (pwm: Take over maintainership of the PWM
subsystem), but I could not find any trace of that file being ever added
to the repository.
Cc: Thierry Reding
Signed-off-by: Cesar Eduardo Barros
---
MAINTAINERS | 1 -
1 file changed, 1 deletion(-)
diff --git a/MAINTAINERS b/M
These files were renamed by commit 85fd6d6 (ARM: S3C2410: move
mach-s3c2410/* into mach-s3c24xx/).
Cc: Ben Dooks
Cc: Vincent Sanders
Cc: Simtec Linux Team
Signed-off-by: Cesar Eduardo Barros
---
MAINTAINERS | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/MAINTAINERS
This directory was moved to drivers/staging/sm7xxfb/ by commit 925aa66
(staging: sm7xxfb: sm7xx becomes sm7xxfb).
Cc: Teddy Wang
Cc: Javier M. Mellid
Signed-off-by: Cesar Eduardo Barros
---
MAINTAINERS | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/MAINTAINERS b/MAINTAINER
This driver was removed by commit 68a5059 (block: remove the deprecated
ub driver).
Cc: Pete Zaitcev
Cc: linux-...@vger.kernel.org
Signed-off-by: Cesar Eduardo Barros
---
MAINTAINERS | 6 --
1 file changed, 6 deletions(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index e8990d2..f4934bd 100644
Added by commit f69d3a1 (Add maintainer for samsung mfd driver). I could
not find any trace of that file being ever added to the repository.
I am guessing that this was a typo for rtc-s3c. Please NACK this patch
if I am wrong.
Cc: Sangbeom Kim
Cc: Alessandro Zummo
Cc: Grant Likely
Cc: Rob Herr
This driver was removed by commit 6187fee (mmc: remove imxmmc driver).
Cc: Sascha Hauer
Cc: Pavel Pisa
Cc: linux-arm-ker...@lists.infradead.org
Signed-off-by: Cesar Eduardo Barros
---
MAINTAINERS | 6 --
1 file changed, 6 deletions(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index fc646ef..
This pattern only matched arch/frv/lib/perf_event.c, which was removed
by commit e360adb (irq_work: Add generic hardirq context callbacks).
Cc: Peter Zijlstra
Cc: Paul Mackerras
Cc: Ingo Molnar
Cc: Arnaldo Carvalho de Melo
Signed-off-by: Cesar Eduardo Barros
---
MAINTAINERS | 1 -
1 file cha
The documentation was moved to Documentation/misc-devices/mei/ instead.
Cc: Tomas Winkler
Signed-off-by: Cesar Eduardo Barros
---
MAINTAINERS | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index e7a2349..fc646ef 100644
--- a/MAINTAINERS
+++ b/MAINT
This file was moved to drivers/i2c/i2c-stub.c by commit 31d178b
(i2c-stub: Move to drivers/i2c).
Cc: Jean Delvare
Cc: "Mark M. Hoffman"
Cc: linux-...@vger.kernel.org
Signed-off-by: Cesar Eduardo Barros
---
MAINTAINERS | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/MAINTAIN
This directory was removed by commit 7d99b3a (isci, firmware: Remove
isci fallback parameter blob and generator).
Cc: Ben Hutchings
Cc: Dan Williams
Cc: James Bottomley
Cc: Intel SCU Linux support
Cc: Lukasz Dorau
Cc: Maciej Patelczyk
Cc: Dave Jiang
Cc: linux-s...@vger.kernel.org
Signed-off
Moved to fs/ext3/ext3.h by commit 4613ad1 (ext3: move headers to
fs/ext3/).
Cc: Al Viro
Cc: Jan Kara
Cc: Andrew Morton
Cc: Andreas Dilger
Cc: linux-e...@vger.kernel.or
Signed-off-by: Cesar Eduardo Barros
---
MAINTAINERS | 2 --
1 file changed, 2 deletions(-)
diff --git a/MAINTAINERS b/MAINT
Several headers were moved or split to uapi/.
Cc: David Howells
Signed-off-by: Cesar Eduardo Barros
---
MAINTAINERS | 160
1 file changed, 118 insertions(+), 42 deletions(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index 05054ad..c382f
This file was moved to drivers/media/platform/soc_camera/atmel-isi.c by
commit b47ff4a ([media] move soc_camera to its own directory).
Cc: Mauro Carvalho Chehab
Cc: Josh Wu
Cc: linux-me...@vger.kernel.org
Signed-off-by: Cesar Eduardo Barros
---
MAINTAINERS | 2 +-
1 file changed, 1 insertion(+
On Wed, Nov 21, 2012 at 04:39:17PM -0800, Greg Kroah-Hartman wrote:
> 3.4-stable review patch. If anyone has any objections, please let me know.
>
> --
>
> From: Jacob Keller
>
> commit 87f4d7c1d36f44b0822053b7e5dedc31fdd0ab99 upstream.
>
> This patch updates the adjfreq callb
On Wed, Nov 21, 2012 at 04:39:48PM -0800, Greg Kroah-Hartman wrote:
> 3.0-stable review patch. If anyone has any objections, please let me know.
>
> --
>
> From: Jacob Keller
>
> commit 87f4d7c1d36f44b0822053b7e5dedc31fdd0ab99 upstream.
>
> This patch updates the adjfreq callb
From: Alessandro Rubini
The header is used by drivers/dma/amba-pl08x.c, which can be compiled
under x86, where PL080 exists under a PCI-to-AMBA bridge. This patche
moves it where it can be accessed by other architectures, and fixes
all users.
Signed-off-by: Alessandro Rubini
Acked-by: Giancarlo
From: David Howells
Export asm/{svm.h,vmx.h,perf_regs.h} so that they can be disintegrated.
It looks from previous commits that the first two should have been exported,
but the header-y lines weren't added to the Kbuild.
I'm guessing that asm/perf_regs.h should be exported too.
Signed-off-by:
From: Sukadev Bhattiprolu
Use the 'unistd.h' from arch/powerpc/include/uapi to build the perf tool.
Signed-off-by: Sukadev Bhattiprolu
Acked-by: David Howells
Cc: Anton Blanchard
Cc: Ingo Molnar
Cc: Paul Mackerras
Cc: Peter Zijlstra
Cc: Robert Richter
Cc: linuxppc-...@ozlabs.org
Link: htt
From: David Howells
Honour the O= flag that was passed to a higher level Makefile and then passed
down as part of a tool build.
To make this work, the top-level Makefile passes the original O= flag and
subdir=tools to the tools/Makefile, and that in turn passes
subdir=$(O)/$(subdir)/foodir when
From: Xiao Guangrong
Now, 'perf kvm stat' is only supported on x86, let its code depend on
(__x86_64__ || __i386__) to fix building it on other architectures.
Reviewed-by: David Howells
Signed-off-by: Xiao Guangrong
Cc: Borislav Petkov
Cc: David Ahern
Cc: David Howells
Cc: Dong Hao
Cc: Ing
From: Xiao Guangrong
Then let it only be used in 'perf kvm stat'.
Preparatory patch to stop trying to build parts of this tool that for
now are only supported on x86.
Signed-off-by: Xiao Guangrong
Cc: Borislav Petkov
Cc: David Ahern
Cc: David Howells
Cc: Dong Hao
Cc: Ingo Molnar
Cc: Josh
Hi Ingo,
Tested using a cross-compiler and directly on a Raspberry pi (ARM) with
raspbian.
Please consider pulling.
- Arnaldo
The following changes since commit 18423d3562f396206e0928a71177eeb2edfed077:
Merge tag 'perf-urgent-for-mingo' of
git://git.kernel.org/pub/scm/linux/
From: David Howells
Define a Makefile function that can be called with $(call ...) to wrap
the subdir make invocations in tools/Makefile.
This will allow us in the next patch to insert bits in there to honour
O= flags when called from the top-level Makefile.
Signed-off-by: David Howells
Cc: Bo
From: David Howells
Fixing:
[acme@sandy linux]$ cd tools
[acme@sandy tools]$ make clean
DESCEND power/cpupower
CC lib/cpufreq.o
CC lib/sysfs.o
LD libcpupower.so.0.0.0
CC utils/helpers/amd.o
utils/helpers/amd.c:7:21: error: pci/pci.h: No such f
From: David Howells
Make perf build for x86 once the UAPI disintegration patches for that arch
have been applied by adding the appropriate -I flags - in the right order -
and then converting some #includes that use ../.. notation to find main kernel
headerfiles to use and instead.
Note that -I
Am Donnerstag, 22. November 2012, 21:08:55 schrieb Stefan Hajnoczi:
> On Thu, Nov 22, 2012 at 8:58 PM, Greg Kroah-Hartman
>
> wrote:
> > On Thu, Nov 22, 2012 at 08:48:39PM +0100, Stefan Hajnoczi wrote:
> >> Markus and I have discussed the MIDI processing that currently happens in
> >> the line6 d
On Thu, Nov 22, 2012 at 12:10:41PM +0400, Kirill Smelkov wrote:
> Linus, maybe you missed this. What is the reason telling people
> CC_OPTIMIZE_FOR_SIZE should be Y if we actually do otherwise?
>
>
> commit 281dc5c5ec0fb299514567cbc358562649c1af95
> Author: Linus Torvalds
> Date: Sun
On Fri, Nov 23, 2012 at 11:34:20PM +, Grant Likely wrote:
> Cc'ing stable since this should go into previous kernels too.
This is not the correct way to submit patches for inclusion in the
stable kernel tree. Please read Documentation/stable_kernel_rules.txt
for how to do this properly.
-
On Sat, Nov 24, 2012 at 7:31 AM, Jeff Chua wrote:
> On Sat, Nov 24, 2012 at 6:21 AM, Jeff Chua wrote:
>> On Fri, Nov 23, 2012 at 9:24 PM, Jens Axboe wrote:
>>> On 2012-11-22 20:21, Linus Torvalds wrote:
Doesn't sound like a fsdevel issue since it seems to be independent of
filesystems.
Hi Shmulik,
Thanks for the review.
On Fri, Nov 23, 2012 at 6:26 PM, Shmulik Ladkani
wrote:
[...]
>> - spin_lock(&ubi->wl_lock);
>> - if (list_empty(&ubi->works) || ubi->ro_mode ||
>
> Originally, 'ubi_thread' did nothing if 'ubi->ro_mode'.
> This filtering is missing from
From: Rafael J. Wysocki
PM QoS flags have to be handled by dev_pm_qos_constraints_destroy()
in the same way as PM QoS resume latency constraits. That is, if
they have been exposed to user space, they have to be hidden from it
and the list of flags requests has to be flushed before destroying
the
Cc'ing stable since this should go into previous kernels too.
g.
Grant Likely wrote:
>On Fri, 23 Nov 2012 14:21:10 -0500 (EST), David Miller
> wrote:
>> From: Andreas Larsson
>> Date: Fri, 23 Nov 2012 12:24:09 +0100
>>
>> > This bug-fix makes sure that of_iomap is defined extern for sparc
>s
Use the events API to trace filemap loading and
unloading of file pieces into the page cache.
This patch aims at tracing the eviction reload
cycle of executable and shared libraries pages in
a memory constrained environment.
The typical usage is to spot a specific device and
inode (for example /l
On Sat, Nov 24, 2012 at 6:21 AM, Jeff Chua wrote:
> On Fri, Nov 23, 2012 at 9:24 PM, Jens Axboe wrote:
>> On 2012-11-22 20:21, Linus Torvalds wrote:
>>> Doesn't sound like a fsdevel issue since it seems to be independent of
>>> filesystems. More like some generic block layer thing. Adding Jens
>>
P J P wrote:
>
>Hello Kees, all,
>
> Please have a look at a *NEW* patch at the end of this mail. It seems to fix
> both the issues, stack disclosure + undue recursions.
>
> It uses modprobe "--first-time" option which returns an error code when
> trying
> to load a module which is alread
* Using pxa27x you could now build both RTC_DRV_PXA and RTC_DRV_SA1100.
* Make sure you don't use both together: link /dev/rtc0 or /dev/rtc1
* to /dev/rtc according to your requirement.
Signed-off-by: Andrea Adami
---
arch/arm/mach-pxa/pxa27x.c |1 +
1 files changed, 1 insertions(+), 0 delet
On Thu, Nov 22, 2012 at 02:21:20PM +0900, Yoshihiro YUNOMAE wrote:
> Hi Marcelo,
>
> (2012/11/21 7:51), Marcelo Tosatti wrote:
> >On Tue, Nov 20, 2012 at 07:36:33PM +0900, Yoshihiro YUNOMAE wrote:
> >>Hi Marcelo,
> >>
> >>Sorry for the late reply.
> >>
> >>(2012/11/17 4:15), Marcelo Tosatti wrote:
Hi Linus,
Here's is a device tree build regression fix that I've just received.
Please pull.
Thanks,
g.
The following changes since commit 26d29d06ea020411559f75ec908db235ca1838d9:
Merge branch 'for-linus' of
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input (2012-11-22
21:45:34 -1000)
On Fri, Nov 23, 2012 at 9:24 PM, Jens Axboe wrote:
> On 2012-11-22 20:21, Linus Torvalds wrote:
>> Doesn't sound like a fsdevel issue since it seems to be independent of
>> filesystems. More like some generic block layer thing. Adding Jens
>> (and quoting the whole thing)
>>
>> Jens, any ideas? Mo
On 11/16/2012 07:02 AM, Hans Verkuil wrote:
> Hi Andrey,
>
> Some more comments...
>
> On Tue October 23 2012 20:44:31 Andrey Smirnov wrote:
>> This commit adds a driver that exposes all the radio related
>> functionality of the Si476x series of chips via the V4L2 subsystem.
>>
>> Signed-off-by: An
On Fri, 23 Nov 2012 14:21:10 -0500 (EST), David Miller
wrote:
> From: Andreas Larsson
> Date: Fri, 23 Nov 2012 12:24:09 +0100
>
> > This bug-fix makes sure that of_iomap is defined extern for sparc so that
> > the
> > sparc-specific implementation of_iomap is once again used when including
> >
Add dma-debug interface debug_dma_mapping_error() to debug drivers that fail
to check dma mapping errors on addresses returned by dma_map_single() and
dma_map_page() interfaces.
Signed-off-by: Shuah Khan
---
arch/tile/include/asm/dma-mapping.h |1 +
1 file changed, 1 insertion(+)
diff --git
Add dma-debug interface debug_dma_mapping_error() to debug drivers that fail
to check dma mapping errors on addresses returned by dma_map_single() and
dma_map_page() interfaces.
Signed-off-by: Shuah Khan
Acked-by: David S. Miller
---
arch/sparc/include/asm/dma-mapping.h |1 +
1 file changed
Add dma-debug interface debug_dma_mapping_error() to debug drivers that fail
to check dma mapping errors on addresses returned by dma_map_single() and
dma_map_page() interfaces.
Signed-off-by: Shuah Khan
---
arch/sh/include/asm/dma-mapping.h |1 +
1 file changed, 1 insertion(+)
diff --git a
Add dma-debug interface debug_dma_mapping_error() to debug drivers that fail
to check dma mapping errors on addresses returned by dma_map_single() and
dma_map_page() interfaces.
Signed-off-by: Shuah Khan
---
arch/powerpc/include/asm/dma-mapping.h |1 +
1 file changed, 1 insertion(+)
diff --
Add dma-debug interface debug_dma_mapping_error() to debug drivers that fail
to check dma mapping errors on addresses returned by dma_map_single() and
dma_map_page() interfaces.
Signed-off-by: Shuah Khan
---
arch/mips/include/asm/dma-mapping.h |2 ++
1 file changed, 2 insertions(+)
diff --g
Add support for debug_dma_mapping_error() call to avoid warning from
debug_dma_unmap() interface when it checks for mapping error checked
status. Without this patch, device driver failed to check map error
warning is generated.
Signed-off-by: Shuah Khan
Acked-by: Michal Simek
---
This patch is
On Tuesday 20 November 2012 08:04 AM, Axel Lin wrote:
I got below build warning while compiling this driver.
It's obviously RC5T583_MAX_INTERRUPT_MASK_REGS is 9 but irq_en_add array only
has 8 elements.
CC drivers/mfd/rc5t583-irq.o
drivers/mfd/rc5t583-irq.c: In function 'rc5t583_irq_sync
Add dma-debug interface debug_dma_mapping_error() to debug drivers that fail
to check dma mapping errors on addresses returned by dma_map_single() and
dma_map_page() interfaces.
Signed-off-by: Shuah Khan
---
arch/ia64/include/asm/dma-mapping.h |1 +
1 file changed, 1 insertion(+)
diff --git
Add dma-debug interface debug_dma_mapping_error() to debug drivers that fail
to check dma mapping errors on addresses returned by dma_map_single() and
dma_map_page() interfaces.
Signed-off-by: Shuah Khan
Acked-by: Mark Salter
---
arch/c6x/include/asm/dma-mapping.h |1 +
1 file changed, 1 in
Add dma-debug interface debug_dma_mapping_error() to debug drivers that fail
to check dma mapping errors on addresses returned by dma_map_single() and
dma_map_page() interfaces.
Signed-off-by: Shuah Khan
Acked-by: Catalin Marinas
---
arch/arm64/include/asm/dma-mapping.h |1 +
1 file changed
An earlier patch added dma mapping error debug feature to dma_debug
infrastructure. References:
https://lkml.org/lkml/2012/10/8/296
https://lkml.org/lkml/2012/11/3/219
The following series of patches adds the call to debug_dma_mapping_error() to
architecture specific dma_mapping_error() interface
Hi Ezequiel,
On Fri, 23 Nov 2012 09:13:29 -0300 Ezequiel Garcia
wrote:
> /**
> - * ubi_thread - UBI background thread.
> + * ubi_wl_do_work - UBI background wl worker function.
> * @u: the UBI device description object pointer
> */
> -int ubi_thread(void *u)
> +void ubi_wl_do_work(struct wo
Hello, Jan.
On Fri, Nov 23, 2012 at 09:44:02PM +0100, Jan Engelhardt wrote:
> when compiling a kernel with the gold linker (3.7.0-rc6 26d29d06ea0204,
> gcc-4.7 and binutils-2.23 in my case), certain pcpu symbols are
> seemingly errneously copied over from .o files to .ko files, leading to
> a h
Hi Linus,
Please pull from the git repository at
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git
pm-for-3.7-rc7
to receive one power management fix for v3.7-rc7 as commit
a7227a0faa117d0bc532aea546ae5ac5f89e8ed7
PM / QoS: fix wrong error-checking condition
on top of comm
Second version of the patch with incorporated suggestions form
Mark(hopefully):
https://lkml.org/lkml/2012/11/20/249
Once again at this point this patch is for illustrative purposes. If
the overall structure and nature of the change is agreed upon, I'll
work on properly implementing it and test
This patch turns QFQ into QFQ+, a variant of QFQ that provides the
following two benefits: 1) QFQ+ is faster than QFQ, 2) differently
from QFQ, QFQ+ correctly schedules also non-leaves classes in a
hierarchical setting. A detailed description of QFQ+, plus a
performance comparison with DRR and QFQ,
Il 23/11/2012 20:28, David Miller ha scritto:
From: Paolo Valente
Date: Thu, 22 Nov 2012 17:56:20 +0100
+/*
+
+ */
Please don't add useless things like this in your patch.
Sorry, I forgot to remove it after I moved the body of the comment to a
better place. I have fixed and checked again t
Hi,
when compiling a kernel with the gold linker (3.7.0-rc6 26d29d06ea0204,
gcc-4.7 and binutils-2.23 in my case), certain pcpu symbols are
seemingly errneously copied over from .o files to .ko files, leading to
a hard warning during depmod:
gold$ make -j8 LD=gold HOSTLD=gold
On Friday, November 23, 2012 08:57:02 PM Fabio Baltieri wrote:
> On Fri, Nov 23, 2012 at 07:23:28PM +0530, Viresh Kumar wrote:
> > On 23 November 2012 18:42, Fabio Baltieri wrote:
> > > Restore the correct delay value for ondemand's od_dbs_timer, as it was
> > > changed erroneously in 83f0e55.
> >
On Friday, November 23, 2012 01:35:58 PM Adrian Hunter wrote:
> Hi
>
> Here is SDHCI ACPI driver.
>
> Changes for v2:
>
> Dropped "PNPACPI: exclude SDHCI devices"
> Added "PNPACPI: exclude devices already bound"
> Changed dev->acpi_handle to ACPI_HANDLE(dev)
> Added Chris
uprobe_unregister() removes the breakpoints only if the last consumer
goes away. To support the filtering it should do this every time, we
want to remove the breakpoints which nobody else want to keep.
Note: given that filter_chain() is not actually implemented, this patch
itself doesn't change th
uprobe_consumer->filter() is pointless in its current form, kill it.
We will add it back, but with the different signature/semantics. Perhaps
we will even re-introduce the callsite in handler_chain(), but not to
just skip uc->handler().
Signed-off-by: Oleg Nesterov
---
include/linux/uprobes.h
Trivial. uprobe can't be NULL after mutex_unlock(), it was already used.
Signed-off-by: Oleg Nesterov
---
kernel/events/uprobes.c |3 +--
1 files changed, 1 insertions(+), 2 deletions(-)
diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c
index e9f22ed..13b247c 100644
--- a/kerne
register/unregister verifies that inode/uc != NULL. For what?
This really looks like "hide the potential problem", the caller
should pass the valid data.
register() also checks uc->next == NULL, probably to prevent the
double-register but the caller can do other stupid/wrong things.
If we do this
1 - 100 of 393 matches
Mail list logo