On Thu, Jun 22, 2017 at 11:14 PM, Andrew Morton
wrote:
> On Thu, 22 Jun 2017 16:14:16 +0200 Dmitry Vyukov wrote:
>
>> Add arch_ prefix to all atomic operations and include
>> . This will allow
>> to add KASAN instrumentation to all atomic ops.
>
> This gets a large number of (simple) rejects when
Zero length payload requests are not handled in
Broadcom SPU2 engine, so this patch adds conditional
check to fallback to software implementation for AES-GCM
and AES-CCM algorithms.
Signed-off-by: Raveendra Padasalagi
Reviewed-by: Ray Jui
Reviewed-by: Scott Branden
---
drivers/crypto/bcm/ciphe
On 06/22/2017 11:24 PM, Rob Herring wrote:
> On Wed, Jun 14, 2017 at 02:05:44PM +0200, Neil Armstrong wrote:
>> Add bindings for the SoC information register of the Amlogic SoCs.
>>
>> Signed-off-by: Neil Armstrong
>> ---
>> Documentation/devicetree/bindings/arm/amlogic.txt | 29
>> +
My apology, this patch set have a bug in hns mac driver which is not
calling phy_loopback enable and disable in pair, I will send a v3 to
fix it. Please ignore this patch set.
Best Regards
Yunsheng Lin
On 2017/6/23 15:54, Lin Yun Sheng wrote:
> This Patch Set add set_loopback in phy_driver and us
On Thu, 15 Jun 2017, Benjamin Tissoires wrote:
> It looks like the Microsft certification misses one case of released fingers.
>
> The (only) solution we can have against that is to wait for a hundred of ms,
> and if no input report comes in, consider that the touches should have been
> released.
On Thu, Jun 22, 2017 at 09:20:59PM +, Chris Packham wrote:
> On 22/06/17 20:23, Wolfram Sang wrote:
> >
> >> + - reset-gpios : gpio specifier for gpio connected to RESET_N pin.
> >
> > What about the 'active' state that Rob mentioned in his last review?
> >
>
> My intention was that by sayi
Hi Jaegeuk,
On 2017/6/12 11:04, Jaegeuk Kim wrote:
> This patch resolves kernel panic for xfstests/081, caused by recent
> f2fs_bug_on
>
> f2fs: add f2fs_bug_on in __remove_discard_cmd
>
> Signed-off-by: Jaegeuk Kim
> ---
> fs/f2fs/segment.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> di
On May 11 2017 or thereabouts, Jiri Kosina wrote:
> On Thu, 27 Apr 2017, Masaki Ota wrote:
>
> > Hi, Benjamin,
> >
> > I modified the patch and added the code that supports Alps USB Touchpad as
> > PATCH 4/4.
>
> Hi,
>
> could you please reformat / extend the changelogs of individual commits a
On 2017/6/23 下午3:15, Liang Chen wrote:
> The id passed to ida_simple_remove has to be the one originally
> allocated with ida_simple_get, not the one after multipling by
> BCACHE_MINORS.
>
> Signed-off-by: Liang Chen
> ---
> drivers/md/bcache/super.c | 5 +++--
> 1 file changed, 3 insertions(+),
Binoy Jayan wrote:
> ===
> dm-crypt optimization for larger block sizes
> ===
>
> Currently, the iv generation algorithms are implemented in dm-c
On Fri, Jun 23, 2017 at 08:24:40AM +0200, Christophe JAILLET wrote:
> 'decay' is kwown to be not NULL at this point.
> 'count' should be tested instead.
>
> Fixes: 011d82611172 ("RAS: Add a Corrected Errors Collector")
> Signed-off-by: Christophe JAILLET
> ---
> drivers/ras/cec.c | 2 +-
> 1 fil
This patch resolves kernel panic for xfstests/081, caused by recent f2fs_bug_on
f2fs: add f2fs_bug_on in __remove_discard_cmd
For fixing, we will stop discard thread in prior in put_super, in order to
avoid racing in between referrer and releaser.
Signed-off-by: Jaegeuk Kim
Signed-off-by: Chao
On 22/06/17 23:41, Gustavo A. R. Silva wrote:
Value assigned to variable _bp_ at line 415 is the same as at line 434.
This makes such variable assignment unnecessary.
Addresses-Coverity-ID: 1227025
Signed-off-by: Gustavo A. R. Silva
Reviewed-by: Daniel Thompson
---
kernel/debug/kdb/kdb_b
Hi Rob,
On Thu, Jun 22, 2017 at 04:09:17PM -0500, Rob Herring wrote:
> On Thu, Jun 22, 2017 at 04:54:30PM +0200, Jacopo Mondi wrote:
> > Add device tree bindings documentation for Renesas RZ/A1 gpio and pin
> > controller.
> >
> > Signed-off-by: Jacopo Mondi
> > ---
> > .../bindings/pinctrl/rene
-Yossef/staging-ccree-bug-fixes-and-TODO-items-for-4-13/20170623-134445
config: sparc64-allmodconfig (attached as .config)
compiler: sparc64-linux-gnu-gcc (Debian 6.1.1-9) 6.1.1 20160705
reproduce:
wget
https://raw.githubusercontent.com/01org/lkp-tests/master/sbin/make.cross -O
~/bin
* Arnaldo Carvalho de Melo wrote:
> Hi Ingo,
>
> Please consider pulling,
>
> - Arnaldo
>
> Test results at the end of this message, as usual.
>
> The following changes since commit fb3a5055cd7098f8d1dd0cd38d717223255f:
>
> perf/x86/intel: Add 1G DTLB load/store miss support for
On Thu, 22 Jun 2017, Don Zickus wrote:
> On Wed, Jun 21, 2017 at 11:53:57PM +0200, Thomas Gleixner wrote:
> > On Wed, 21 Jun 2017, kan.li...@intel.com wrote:
> > > We now have more and more systems where the Turbo range is wide enough
> > > that the NMI watchdog expires faster than the soft watchdo
Hi:
Thanks for the discussions! If the userspace application has
already maintained a LRU list, it looks like we don't need generation
anymore, as userspace application will lookup the guest framebuffer from
the LRU list by "offset". No matter how, it would know if this is a new
guest fram
On Mon, Jun 19, 2017 at 6:05 PM, Krzysztof Kozlowski wrote:
>
> ARM defconfig cleanup:
> 1. Remove old Kconfig options from all ARM configs,
> 2. Update Samsung defconfigs to bring back options over time got disabled
>for some re
On Fri, 2017-06-23 at 09:48 +0200, Jiri Slaby wrote:
>
> mac80211_queue is 255 which is IEEE80211_INVAL_HW_QUEUE, so it should
> not be worked with at all.
Funny you should find this today :-)
> The invalid queue is hopefully handled in ieee80211_check_queues
> after
> drv_add_interface in ieee8
On Thu, Jun 22, 2017 at 05:05:35PM -0500, Gustavo A. R. Silva wrote:
> Add code comment to make it clear that the fall-through is intentional and,
> OR ret with its previous value to avoid overwriting it.
>
> Cc: Borislav Petkov
> Signed-off-by: Gustavo A. R. Silva
> ---
> drivers/edac/pnd2_eda
On Wed, 21 Jun 2017, Jiri Slaby wrote:
> diff --git a/arch/arm64/include/asm/futex.h b/arch/arm64/include/asm/futex.h
> index f32b42e8725d..5bb2fd4674e7 100644
> --- a/arch/arm64/include/asm/futex.h
> +++ b/arch/arm64/include/asm/futex.h
> @@ -48,20 +48,10 @@ do {
Hi,
we have got an UBSAN report from opensuse's user who booten
UBSAN-enabled kernel by mistake:
UBSAN: Undefined behaviour in
drivers/net/wireless/intel/iwlwifi/mvm/utils.c:667:49
shift exponent 255 is too large for 64-bit type 'long unsigned int'
CPU: 2 PID: 1590 Comm: wpa_supplicant Not tainted
Hi Kieran,
Thank you for the patch.
On Wednesday 14 Jun 2017 20:58:13 Kieran Bingham wrote:
> From: Kieran Bingham
>
> The Salvator boards use an ADV7482 receiver for HDMI and CVBS inputs.
>
> Provide ADV7482 node on the i2c4 bus, along with connectors for the
> hdmi and cvbs inputs, and link
Commit-ID: 3e401f7a2e5199151f735aee6a5c6b4776e6a35e
Gitweb: http://git.kernel.org/tip/3e401f7a2e5199151f735aee6a5c6b4776e6a35e
Author: Thiago Jung Bauermann
AuthorDate: Tue, 20 Jun 2017 19:08:30 -0300
Committer: Thomas Gleixner
CommitDate: Fri, 23 Jun 2017 09:32:11 +0200
powerpc: Only
V2 changes:
- beautification (ymmv)
- enable lock stealing when waiter is queued
rtmutex: Fix lock stealing logic
1. When trying to acquire an rtmutex, we first try to grab it without
queueing the waiter, and explicitly check for that initial attempt
in the !waiter path of __try_to_take_rt_mu
File size before:
textdata bss dec hex filename
6712 960 52181932001
drivers/staging/unisys/visorbus/visorbus_main.o
File size After adding 'const':
textdata bss dec hex filename
6840 832 52181932001
drivers/staging/unis
Hi Benson,
On 22/06/2017 21:35, Benson Leung wrote:
+ adev = ACPI_COMPANION(dev);
+ if (adev) {
+ status = acpi_install_notify_handler(adev->handle,
+ACPI_ALL_NOTIFY,
Is there a reason you're using ACPI_ALL_NOTIFY
On Fri, 23 Jun 2017 09:22:15 +0200
Andrzej Hajda wrote:
> On 22.06.2017 15:34, Boris Brezillon wrote:
> > On Thu, 22 Jun 2017 15:16:47 +0200
> > Andrzej Hajda wrote:
> >
> >> On 22.06.2017 14:41, Boris Brezillon wrote:
> >>> On Thu, 22 Jun 2017 14:29:07 +0200
> >>> Andrzej Hajda wrote:
> >>
Hi,
On Tue, Jun 13, 2017 at 06:05:57PM +0800, Chen-Yu Tsai wrote:
> > That's not true. DE1's can output to several TCONs (or rather, TCONs
> > can select multiple engines as their input). The A31 for example is in
> > this case.
>
> Actually that's not true. The TCON is bound to the backend. I do
On Thu, 22 Jun 2017, Andy Lutomirski wrote:
> On Thu, Jun 22, 2017 at 2:22 PM, Thomas Gleixner wrote:
> > On Thu, 22 Jun 2017, Andy Lutomirski wrote:
> >> On Thu, Jun 22, 2017 at 5:21 AM, Thomas Gleixner
> >> wrote:
> >> > Now one other optimization which should be trivial to add is to keep the
Original comments is confusing on "OBJ directory", make it clear.
Bonus: move comments close to what it want to comment.
Signed-off-by: Cao jin
---
Makefile | 7 ---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/Makefile b/Makefile
index 57df756..81c0df9 100644
--- a/Makefile
Hi,
> Is this only going to support accelerated driver output, not basic
> VGA
> modes for BIOS interaction?
Right now there is no vgabios or uefi support for the vgpu.
But even with that in place there still is the problem that the display
device initialization happens before the guest runs a
> This patch adds support for Diolan DLN2 ADC via IIO's ADC interface.
> ADC is the fourth and final component of the DLN2 for the kernel.
I am missing a changelog or information if and how review comments have
been addressed
thanks for the super-fast turnaround, anyway
p.
> Signed-off-by: Ja
Hi Joe,
On 06/22/2017 07:07 PM, Joe Perches wrote:
> On Thu, 2017-06-22 at 16:35 +0300, laurentiu.tu...@nxp.com wrote:
>> From: Laurentiu Tudor
>>
>> Several macros were triggering this checkpatch.pl warning:
>>"Macro argument reuse '$arg' - possible side-effects?"
>> Fix the warning by turni
This Patch Set add set_loopback in phy_driver and use it to setup loopback
when doing ethtool phy self_test.
Patch V2:
1. Add phy_loopback in phy_device.c.
2. Do error checking and do the read and write once in genphy_loopback.
3. Remove gen10g_loopback in phy_device.c.
Pa
Use function set_loopback in phy_driver to setup phy loopback
when doing ethtool self test.
Signed-off-by: Lin Yun Sheng
---
drivers/net/ethernet/hisilicon/hns/hns_ethtool.c | 68 +---
1 file changed, 14 insertions(+), 54 deletions(-)
diff --git a/drivers/net/ethernet/hisili
This patch add set_loopback in phy_driver, which is used by Mac
driver to enable or disable a phy. it also add a generic
genphy_loopback function, which use BMCR loopback bit to enable
or disable a phy.
Signed-off-by: Lin Yun Sheng
---
drivers/net/phy/marvell.c| 1 +
drivers/net/phy/phy_dev
On 22.06.2017 15:34, Boris Brezillon wrote:
> On Thu, 22 Jun 2017 15:16:47 +0200
> Andrzej Hajda wrote:
>
>> On 22.06.2017 14:41, Boris Brezillon wrote:
>>> On Thu, 22 Jun 2017 14:29:07 +0200
>>> Andrzej Hajda wrote:
>>>
On 22.06.2017 11:23, Boris Brezillon wrote:
> On Thu, 22 Jun 20
From: Huang Ying
To support to delay splitting THP (Transparent Huge Page) after
swapped out. We need to enhance swap writing code to support to write
a THP as a whole. This will improve swap write IO performance. As
Ming Lei pointed out, this should be based on
multipage bvec support, which
From: Huang Ying
The normal swap slot reclaiming can be done when the swap count
reaches SWAP_HAS_CACHE. But for the swap slot which is backing a THP,
all swap slots backing one THP must be reclaimed together, because the
swap slot may be used again when the THP is swapped out again later.
So th
From: Huang Ying
Previously, swapcache_free_cluster() is used only in the error path of
shrink_page_list() to free the swap cluster just allocated if the
THP (Transparent Huge Page) is failed to be split. In this patch, it
is enhanced to clear the swap cache flag (SWAP_HAS_CACHE) for the swap
cl
From: Huang Ying
The .rw_page in struct block_device_operations is used by the swap
subsystem to read/write the page contents from/into the corresponding
swap slot in the swap device. To support the THP (Transparent Huge
Page) swap optimization, the .rw_page is enhanced to support to
read/write
From: Huang Ying
In this patch, splitting transparent huge page (THP) during swapping
out is delayed from after adding the THP into the swap cache to after
swapping out finishes. After the patch, more operations for the
anonymous THP reclaiming, such as writing the THP to the swap device,
removi
From: Huang Ying
Hi, Andrew, could you help me to check whether the overall design is
reasonable?
Hi, Johannes and Minchan, Thanks a lot for your review to the first
step of the THP swap optimization! Could you help me to review the
second step in this patchset?
Hi, Hugh, Shaohua, Minchan and
From: Huang Ying
After supporting to delay THP (Transparent Huge Page) splitting after
swapped out, it is possible that some page table mappings of the THP
are turned into swap entries. So reuse_swap_page() need to check the
swap count in addition to the map count as before. This patch done
tha
From: Huang Ying
This patch makes mem_cgroup_swapout() works for the transparent huge
page (THP). Which will move the memory cgroup charge from memory to
swap for a THP.
This will be used for the THP swap support. Where a THP may be
swapped out as a whole to a set of (HPAGE_PMD_NR) continuous
The id passed to ida_simple_remove has to be the one originally
allocated with ida_simple_get, not the one after multipling by
BCACHE_MINORS.
Signed-off-by: Liang Chen
---
drivers/md/bcache/super.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/md/bcache/super.c
From: Huang Ying
For a THP (Transparent Huge Page), tail_page->mem_cgroup is NULL. So
to check whether the page is charged already, we need to check the
head page. This is not an issue before because it is impossible for a
THP to be in the swap cache before. But after we add delaying
splitting
From: Huang Ying
After adding swapping out support for THP (Transparent Huge Page), it
is possible that a THP in swap cache (partly swapped out) need to be
split. To split such a THP, the swap cluster backing the THP need to
be split too, that is, the CLUSTER_FLAG_HUGE flag need to be cleared
fo
From: Huang Ying
It's hard to write a whole transparent huge page (THP) to a file
backed swap device during swapping out and the file backed swap device
isn't very popular. So the huge cluster allocation for the file
backed swap device is disabled.
Signed-off-by: "Huang, Ying"
Cc: Johannes Wei
From: Huang Ying
When swapping out THP (Transparent Huge Page), instead of swapping out
the THP as a whole, sometimes we have to fallback to split the THP
into normal pages before swapping, because no free swap clusters are
available, or cgroup limit is exceeded, etc. To count the number of
the
From: Huang Ying
PTE mapped THP (Transparent Huge Page) will be ignored when moving
memory cgroup charge. But for THP which is in the swap cache, the
memory cgroup charge for the swap of a tail-page may be moved in
current implementation. That isn't correct, because the swap charge
for all sub-
Hi all,
Changes since 20170622:
Removed tree: dma-mapping
Renamed tree: dma-mapping-hch to dma-mapping
The net-next tree gained a conflict against the net tree.
The sound-asoc tree gained a conflict against the pm tree.
The block tree gained a conflict against Linus' tree.
The devicetree tree
In qla2xx_start_scsi_mq() and qla2xx_dif_start_scsi_mq() we grab the
qpair->qp_lock but do access members of the qpair before having the lock.
Re-order the locking sequence to have all read and write access to qpair
members under the qpair->qp_lock.
Signed-off-by: Johannes Thumshirn
---
drivers/
Hi,
On Fri, 23 Jun 2017 06:46:53 + wrote:
>
> > -Original Message-
> > From: Stephen Rothwell [mailto:s...@canb.auug.org.au]
> > Sent: Friday, June 23, 2017 3:43 PM
> > To: David Miller
> > Cc: npig...@gmail.com; linux-n...@vger.kernel.org;
> > linux-kernel@vger.kernel.org; Yamada, M
On Thu, Jun 22, 2017 at 9:59 PM, Stefan Berger
wrote:
> This series of patches primary goal is to enable file capabilities
> in user namespaces without affecting the file capabilities that are
> effective on the host. This is to prevent that any unprivileged user
> on the host maps his own uid to
Kees Cook writes:
> Now that explicitly executed loaders are loaded in the mmap region,
> position PIE binaries lower in the address space to avoid possible
> collisions with mmap or stack regions. For 64-bit, align to 4GB to
> allow runtimes to use the entire 32-bit address space for 32-bit
> po
701 - 758 of 758 matches
Mail list logo
