Hi Jon Mason, Allen Hubbe, Dave Jiang,
On 30/09/20 9:05 pm, Kishon Vijay Abraham I wrote:
> This series is about implementing SW defined Non-Transparent Bridge (NTB)
> using multiple endpoint (EP) instances. This series has been tested using
> 2 endpoint instances in J7 connected to J7 board on
Roger,
>
>Pawel,
>
>On 02/10/2020 12:08, Pawel Laszczak wrote:
>> Roger,
>>
>>>
>>> On 30/09/2020 09:57, Pawel Laszczak wrote:
To avoid duplicate error information patch replaces platform_get_irq_byname
into platform_get_irq_byname_optional.
>>>
>>> What is duplicate error information?
On 04-10-20, 21:55, Dave Jiang wrote:
> > > +static bool process_fault(struct idxd_desc *desc, u64 fault_addr)
> > > +{
> > > + if ((u64)desc->hw == fault_addr ||
> > > + (u64)desc->completion == fault_addr) {
> >
> > you are casting descriptor address and completion, I can understand
> >
Hi Florian,
On 04-10-20, 19:56, Florian Fainelli wrote:
>
>
> On 9/30/2020 8:19 PM, Florian Fainelli wrote:
> > Hi Kishon,
> >
> > This patch series allows the configuration of the Broadcom SATA PHY TX
> > amplitude which may be required in order to meet specific tests.
>
> Hi Vinod,
>
>
The order in which 'users' counter is decremented vs calling drivers'
close() method is implementation specific, and we should not rely on
it. Let's introduce driver private flag and use it to signal ISR
to exit when device is being closed.
This has a side-effect of fixing issue of accessing
On 10/4/20 8:07 PM, Chu Lin wrote:
> On Sun, Oct 4, 2020 at 8:43 AM Guenter Roeck wrote:
>>
>> On Sun, Oct 04, 2020 at 03:14:45AM +, Chu Lin wrote:
>>> Problem:
>>> We use voltage dividers so that the voltage presented at the voltage
>>> sense pins is confusing. We might need to convert these
> Subject: [PATCH 01/10] fpga: fpga-mgr: Add devm_fpga_mgr_register() API
>
> Add a devm_fpga_mgr_register() API that can be used to register a FPGA
> Manager that was created using devm_fpga_mgr_create().
>
> Introduce a struct fpga_mgr_devres that makes the devres
> allocation a little bit
The original intent of 84d3f6b76447 was to delay evaluating lid state until
all drivers have been loaded, with input device being opened from userspace
serving as a signal for this condition. Let's ensure that state updates
happen even if userspace closed (or in the future inhibited) input device.
On Thu, Jun 25, 2020 at 12:55:29PM +0200, Rafael J. Wysocki wrote:
> On Thu, Jun 25, 2020 at 7:23 AM Dmitry Torokhov
> wrote:
> >
> > On Wed, Jun 24, 2020 at 05:00:09PM +0200, Rafael J. Wysocki wrote:
> > > On Mon, Jun 8, 2020 at 1:22 PM Andrzej Pietrasiewicz
> > > wrote:
> > > >
> > > >
1) Make sure SKB control block is in the proper state during IPSEC
ESP-in-TCP encapsulation. From Sabrina Dubroca.
2) Various kinds of attributes were not being cloned properly when
we build new xfrm_state objects from existing ones. Fix from
Antony Antony.
3) Make sure to keep BTF
On Wed, Jun 24, 2020 at 10:24:46PM -0700, Dmitry Torokhov wrote:
> On Mon, Jun 08, 2020 at 01:22:08PM +0200, Andrzej Pietrasiewicz wrote:
> > A new helper is available, so use it.
> >
> > Signed-off-by: Andrzej Pietrasiewicz
> > ---
> > drivers/acpi/button.c | 4 ++--
> > 1 file changed, 2
tree: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
master
head: 549738f15da0e5a00275977623be199fbbf7df50
commit: 1e1b6d63d6340764e00356873e5794225a2a03ea lib/string.c: implement stpcpy
date: 9 days ago
config: powerpc-randconfig-r002-20201005 (attached as .config)
On 28-09-20, 10:59, Rob Herring wrote:
> The default sizes in examples for 'reg' are 1 cell each. Fix the
> incorrect sizes in zynqmp examples:
>
> Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.example.dt.yaml:
> example-0: dma-controller@fd4c:reg:0: [0, 4249616384, 0, 4096]
On 10/4/2020 9:42 PM, Vinod Koul wrote:
On 24-09-20, 11:00, Dave Jiang wrote:
Add code to "complete" a descriptor when the descriptor or its completion
address hit a fault error when SVA mode is being used. This error can be
triggered due to bad programming by the user. A lock is introduced
On 16-09-20, 22:41, Sumit Gupta wrote:
> Warning coming during boot because the boot freq set by bootloader
> gets filtered out due to big freq steps while creating freq_table.
> Fixing this by setting closest ndiv value from freq_table.
> Warning:
> cpufreq: cpufreq_online: CPU0: Running at
From: V Sujith Kumar Reddy
Increase buffer size to support audio over DP.
Signed-off-by: V Sujith Kumar Reddy
Signed-off-by: Srinivasa Rao Mandadapu
---
sound/soc/qcom/lpass-platform.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/qcom/lpass-platform.c
From: V Sujith Kumar Reddy
Add support for audio playback over DP in lpass
sc7180 platform driver. Update lpass_variant
structure for hdmi data configuaration.
Signed-off-by: V Sujith Kumar Reddy
Signed-off-by: Srinivasa Rao
---
sound/soc/qcom/lpass-sc7180.c | 116
From: V Sujith Kumar Reddy
Upadate lpass cpu and platform driver to support audio over dp.
Also add lpass-hdmi.c and lpass-hdmi.h.
Signed-off-by: V Sujith Kumar Reddy
Signed-off-by: Srinivasa Rao
---
sound/soc/qcom/Kconfig | 5 +
sound/soc/qcom/Makefile | 2 +
On 20-09-20, 13:26, Julia Lawall wrote:
> sg_init_table zeroes its first argument, so the allocation of that argument
> doesn't have to.
>
> the semantic patch that makes this change is as follows:
> (http://coccinelle.lip6.fr/)
Applied, thanks
--
~Vinod
On 20-09-20, 13:26, Julia Lawall wrote:
> sg_init_table zeroes its first argument, so the allocation of that argument
> doesn't have to.
>
> the semantic patch that makes this change is as follows:
> (http://coccinelle.lip6.fr/)
Applied, thanks
--
~Vinod
From: V Sujith Kumar Reddy
Update dts property read API call with platform get property
by name, as it make code more readable and avoid conflicts
when array of properties to be used.
Signed-off-by: V Sujith Kumar Reddy
Reviewed-by: Srinivas Kandagatla
Signed-off-by: Srinivasa Rao
---
From: V Sujith Kumar Reddy
Update the lpaif_dmactl struct members order to match
HDMI reg map members sequence. Separate Interface reg map
as it is used for I2S control but not for HDMI control,
to make use of bulk API, which makes code more readable.
Signed-off-by: V Sujith Kumar Reddy
These patches are to support audio over DP port on Qualcomm's SC7180 LPASS
Asoc. It includes machine driver, cpu driver, platform driver updates for
HDMI path support, device tree documention, lpass variant structure
optimization and configuration changes.
These patches depends on the DP patch
From: V Sujith Kumar Reddy
Adds bindings for lpass hdmi interface
which can support audio path over dp.
Signed-off-by: V Sujith Kumar Reddy
Reviewed-by: Rob Herring
Signed-off-by: Srinivasa Rao
---
.../devicetree/bindings/sound/qcom,lpass-cpu.yaml | 74 +++---
1 file
From: V Sujith Kumar Reddy
Add header defining hdmi dai-id for SC7180 lpass soc
in dt bindings.
Signed-off-by: V Sujith Kumar Reddy
Acked-by: Rob Herring
Signed-off-by: Srinivasa Rao
---
include/dt-bindings/sound/sc7180-lpass.h | 1 +
1 file changed, 1 insertion(+)
diff --git
On 22-09-20, 14:08, Logan Gunthorpe wrote:
> dma_alloc_coherent() is called with a fixed SZ_2M size, but frees happen
> with IOAT_CHUNK_SIZE. Recently, IOAT_CHUNK_SIZE was reduced to 512M but
> the allocation did not change. To fix, change to using the
> IOAT_CHUNK_SIZE define.
>
> This was
On 16-09-20, 22:41, Sumit Gupta wrote:
> Frequency returned by 'cpuinfo_cur_freq' using counters is not fixed
> and keeps changing slightly. This change returns a consistent value
> from freq_table. If the reconstructed frequency has acceptable delta
> from the last written value, then return the
On Monday, October 5, 2020 12:19 AM, Joe Perches wrote:
> I did not suggest this.
My apologies. Revised patch (still diffing from Xiongfeng Wang) here.
[PATCH v2] test_power: revise parameter printing to use sprintf
Signed-off-by: Harley A.W. Lorenzo
Suggested-by: Joe Perches
---
On 24-09-20, 11:00, Dave Jiang wrote:
> Add the sysfs attribute bits in ABI/stable for shared wq support.
OK I take back the documentation comment now
>
> Signed-off-by: Jing Lin
> Signed-off-by: Dave Jiang
> Reviewed-by: Tony Luck
> Reviewed-by: Dan Williams
> ---
>
On 24-09-20, 11:00, Dave Jiang wrote:
> Add code to "complete" a descriptor when the descriptor or its completion
> address hit a fault error when SVA mode is being used. This error can be
> triggered due to bad programming by the user. A lock is introduced in order
> to protect the descriptor
Hi Steven,
please let us know, if below looks good to you or need modifications.
Thanks
Gaurav
On 9/24/2020 7:25 PM, Gaurav Kohli wrote:
Below race can come, if trace_open and resize of
cpu buffer is running parallely on different cpus
CPUXCPUY
On 24-09-20, 11:00, Dave Jiang wrote:
> @@ -1154,6 +1268,8 @@ static struct attribute *idxd_wq_attributes[] = {
> _attr_wq_mode.attr,
> _attr_wq_size.attr,
> _attr_wq_priority.attr,
> + _attr_wq_block_on_fault.attr,
> + _attr_wq_threshold.attr,
>
On 17-09-20, 09:36, Jon Hunter wrote:
> Viresh, ideally we need to include this fix for v5.9. Do you need Sumit
> to resend with the Fixes tag or are you happy to add?
I understand that this fixes a patch which got merged recently, but I am not
sure if anything is broken badly right now, i.e.
On 04-10-20, 16:03, Paul Cercueil wrote:
> The jz4780_dma_tx_status() function would check if a channel's cookie
> state was set to 'completed', and if not, it would enter the critical
> section. However, in that time frame, the jz4780_dma_chan_irq() function
> was able to set the cookie to
On Mon, 2020-10-05 at 01:30 +, Harley A.W. Lorenzo wrote:
> Here is the updated patch using sprintf, diffing from the original patch by
> Xiongfeng Wang.
>
> [PATCH] test_power: revise parameter printing to use sprintf
>
> Signed-off-by: Harley A.W. Lorenzo
> Suggested-by: Joe Perches
I
From: Rikard Falkeborn
Date: Mon, 5 Oct 2020 01:44:15 +0200
> Make a couple of static struct genl_small_ops const to allow the compiler
> to put them in read-only memory. Patches are independent.
>
> v2: Rebase on net-next, genl_ops -> genl_small_ops
Applied, thank you.
These patches are to support audio over DP port on Qualcomm's SC7180 LPASS
Asoc. It includes machine driver, cpu driver, platform driver updates for
HDMI path support, device tree documention, lpass variant structure
optimization and configuration changes.
These patches depends on the DP patch
From: V Sujith Kumar Reddy
Add support for audio playback over DP in lpass
sc7180 platform driver. Update lpass_variant
structure for hdmi data configuaration.
Signed-off-by: V Sujith Kumar Reddy
Signed-off-by: Srinivasa Rao
---
sound/soc/qcom/lpass-sc7180.c | 116
From: V Sujith Kumar Reddy
Adds bindings for lpass hdmi interface
which can support audio path over dp.
Signed-off-by: V Sujith Kumar Reddy
Reviewed-by: Rob Herring
Signed-off-by: Srinivasa Rao
---
.../devicetree/bindings/sound/qcom,lpass-cpu.yaml | 74 +++---
1 file
From: V Sujith Kumar Reddy
Upadate lpass cpu and platform driver to support audio over dp.
Also add lpass-hdmi.c and lpass-hdmi.h.
Signed-off-by: V Sujith Kumar Reddy
Signed-off-by: Srinivasa Rao
---
sound/soc/qcom/Kconfig | 5 +
sound/soc/qcom/Makefile | 2 +
From: V Sujith Kumar Reddy
Increase buffer size to support audio over DP.
Signed-off-by: V Sujith Kumar Reddy
Signed-off-by: Srinivasa Rao Mandadapu
---
sound/soc/qcom/lpass-platform.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/qcom/lpass-platform.c
From: V Sujith Kumar Reddy
Update the lpaif_dmactl struct members order to match
HDMI reg map members sequence. Separate Interface reg map
as it is used for I2S control but not for HDMI control,
to make use of bulk API, which makes code more readable.
Signed-off-by: V Sujith Kumar Reddy
From: V Sujith Kumar Reddy
Add header defining hdmi dai-id for SC7180 lpass soc
in dt bindings.
Signed-off-by: V Sujith Kumar Reddy
Acked-by: Rob Herring
Signed-off-by: Srinivasa Rao
---
include/dt-bindings/sound/sc7180-lpass.h | 1 +
1 file changed, 1 insertion(+)
diff --git
From: V Sujith Kumar Reddy
Update dts property read API call with platform get property
by name, as it make code more readable and avoid conflicts
when array of properties to be used.
Signed-off-by: V Sujith Kumar Reddy
Reviewed-by: Srinivas Kandagatla
Signed-off-by: Srinivasa Rao
---
On Tue, Sep 22, 2020 at 11:39:03AM +0200, Stefan Riedmueller wrote:
> Make use of generic touchscreen_properties structure to add axis
> inversion and swapping capabilities. It's configurable via devicetree
> properties:
> touchscreen-inverted-x
> touchscreen-inverted-y
>
syzbot has found a reproducer for the following issue on:
HEAD commit:2172e358 Add linux-next specific files for 20201002
git tree: linux-next
console output: https://syzkaller.appspot.com/x/log.txt?x=1596c7a390
kernel config:
[Re-sending in plain text]
Hi Marcel,
I tried Alex's patch and it works for me as well.
Thanks,
Archie
On Thu, 1 Oct 2020 at 15:14, Marcel Holtmann wrote:
>
> Hi Archie,
>
> > When receiving connection, we only check whether the link has been
> > encrypted, but not the
When TPM 2.0 trusted keys code was moved to the trusted keys subsystem,
the operations were unwrapped from tpm_try_get_ops() and tpm_put_ops(),
which are used to take temporarily the ownership of the TPM chip. The
ownership is only taken inside tpm_send(), but this is not sufficient,
as in the key
Consider the following transcript:
$ keyctl add trusted kmk "new 32 blobauth=helloworld keyhandle=8000
migratable=1" @u
add_key: Invalid argument
The documentation has the following description:
migratable= 0|1 indicating permission to reseal to new PCR values,
default
When tpm_get_random() was introduced, it defined the following API for the
return value:
1. A positive value tells how many bytes of random data was generated.
2. A negative value on error.
However, in the call sites the API was used incorrectly, i.e. as it would
only return negative values and
On Fri, 2 Oct 2020 10:18:41 -0500
Josh Poimboeuf wrote:
> On Thu, Oct 01, 2020 at 12:17:25AM +0200, Vasily Gorbik wrote:
> > From: Martin Schwidefsky
> >
> > Currently objtool seems to be the only tool from build tools needed
> > which breaks x86 cross compilation on big endian systems. Make
On Sun, Oct 4, 2020 at 9:22 PM Alexandre Courbot wrote:
>
> The addition of MT8183 support added a dependency on the SCP remoteproc
> module. However the initial patch used the "select" Kconfig directive,
> which may result in the SCP module to not be compiled if remoteproc was
> disabled. In
Dear Greg,
This is extcon-next pull request for v5.10. I add detailed description of
this pull request on below. Please pull extcon with following updates.
Changes from v1:
- Fix the wrong commit id of patch.
Best Regards,
Chanwoo Choi
The following changes since commit
On Sun, Oct 4, 2020 at 8:43 AM Guenter Roeck wrote:
>
> On Sun, Oct 04, 2020 at 03:14:45AM +, Chu Lin wrote:
> > Problem:
> > We use voltage dividers so that the voltage presented at the voltage
> > sense pins is confusing. We might need to convert these readings to more
> > meaningful
On Mon, Oct 05, 2020 at 02:30:53AM +0100, Matthew Wilcox wrote:
> > In my Geminilake NUC the maximum size of the address space is 64GB for
> > an enclave, and it is not fixed but can grow in microarchitectures
> > beyond that.
> >
> > That means that in (*artificial*) worst case the locks would
Under some circumstances, the compiler generates .ctors.* sections. This
is seen doing a cross compile of x86_64 from a powerpc64el host:
x86_64-linux-gnu-ld: warning: orphan section `.ctors.65435' from
`kernel/trace/trace_clock.o' being
placed in section `.ctors.65435'
x86_64-linux-gnu-ld:
On 9/30/2020 8:19 PM, Florian Fainelli wrote:
Hi Kishon,
This patch series allows the configuration of the Broadcom SATA PHY TX
amplitude which may be required in order to meet specific tests.
Hi Vinod,
Would you need me to resend these two patches? For some reason
get_maintainers.pl did
Under some circumstances, the compiler generates .ctors.* sections. This
is seen doing a cross compile of x86_64 from a powerpc64el host:
x86_64-linux-gnu-ld: warning: orphan section `.ctors.65435' from
`kernel/trace/trace_clock.o' being
placed in section `.ctors.65435'
x86_64-linux-gnu-ld:
On Wed, Sep 30, 2020 at 05:41:46PM +0800, Vincent Huang wrote:
> f30_data in rmi_device_platform_data could be also referenced by RMI
> function 3A, so rename it and the structure name to avoid confusion.
>
> Signed-off-by: Vincent Huang
> Reviewed-by: Hans de Goede
> Tested-by: Hans de Goede
On Wed, Sep 30, 2020 at 05:41:47PM +0800, Vincent Huang wrote:
> RMI4 F3A supports the touchpad GPIO function, it's designed to
> support more GPIOs and used on newer touchpads. This patch adds
> support of the touchpad buttons.
>
> Signed-off-by: Vincent Huang
> Reviewed-by: Hans de Goede
>
On Sun, Oct 04, 2020 at 09:00:18PM +1100, Stephen Rothwell wrote:
> Hi Kees,
>
> On Sun, 4 Oct 2020 01:27:01 -0700 Kees Cook wrote:
> >
> > I assume CONFIG_CONSTRUCTORS is enabled for your build (it should be for
>
> yes, indeed.
>
> > allmodconfig). Does this patch fix it? (I'm kind of
Recently, we have observed some janky issues caused by unpleasantly long
contention on mmap_lock which is held by smaps_rollup when probing large
processes. To address the problem, we let smaps_rollup detect if anyone
wants to acquire mmap_lock for write attempts. If yes, just release the
lock
Extend smap_gather_stats to support indicated beginning address at
which it should start gathering. To achieve the goal, we add a new
parameter @start assigned by the caller and try to refactor it for
simplicity.
If @start is 0, it will use the range of @vma for gathering.
Change since v2:
-
Add new API to query if someone wants to acquire mmap_lock
for write attempts.
Using this instead of rwsem_is_contended makes it more tolerant
of future changes to the lock type.
Change-Id: Idb21478bb0580ba72b9926aba3bbc4b1f75deec2
Signed-off-by: Chinwen Chang
Reviewed-by: Steven Price
smaps_rollup will try to grab mmap_lock and go through the whole vma
list until it finishes the iterating. When encountering large processes,
the mmap_lock will be held for a longer time, which may block other
write requests like mmap and munmap from progressing smoothly.
There are upcoming
On Sun, Oct 04, 2020 at 04:31:46PM -0700, Paul E. McKenney wrote:
> Nice simple example! How about like this?
>
> Thanx, Paul
>
>
>
> commit
On Fri, Aug 21, 2020 at 11:08:22AM +0800, Coiby Xu wrote:
On Sun, Aug 16, 2020 at 11:56:40AM +0900, Benjamin Poirier wrote:
On 2020-08-15 00:05 +0800, Coiby Xu wrote:
Initialize devlink health dump framework for the dlge driver so the
coredump could be done via devlink.
Signed-off-by: Coiby
On 10/02/2020 05:34 PM, Michal Hocko wrote:
> On Wed 30-09-20 11:30:49, Anshuman Khandual wrote:
>> Add following new vmstat events which will track HugeTLB page migration.
>>
>> 1. HUGETLB_MIGRATION_SUCCESS
>> 2. HUGETLB_MIGRATION_FAILURE
>>
>> It follows the existing semantics to accommodate
On Fri, 2020-09-25 at 15:25 +0800, Hector Yuan wrote:
> Hi, Rob sir:
>
> Yes, my patch follows
> Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt way to
> define frequency domain.
> Is it OK to you if I use the same way to do?
> And if there exist any schema problem, please kindly
On Mon, Sep 14, 2020 at 04:05:22PM +0800, Chester Lin wrote:
> Hi Ard,
>
> On Fri, Sep 11, 2020 at 06:01:09PM +0300, Ard Biesheuvel wrote:
> > On Fri, 4 Sep 2020 at 10:29, Chester Lin wrote:
> > >
> > > Add a new UEFI parameter: "linux,uefi-secure-boot" in fdt boot params
> > > as other
During testing, I see it is possible that rcu_pending() returns 1 when
offloaded callbacks are ready to execute thus raising the RCU softirq.
However, softirq does not execute offloaded callbacks. They are executed in a
kthread which is awakened independent of the softirq.
This commit therefore
On 10/4/2020 23:03, Leonid Bloch wrote:
Lars,
Thank you for your review! The changes which you have suggested also
made ModemManager to recognize the device (which it didn't do before).
Please check out the v2.
Cheers,
Leonid.
The v2 looks good to me
br
Lars
Hi Andrew,
On 2020/10/1, 8:36 AM, Andrew Jeffery wrote:
Hi Billy,
On Wed, 30 Sep 2020, at 14:41, Billy Tsai wrote:
> This commit add two sgpiom and two sgpios node into aspeed-g6.dtsi
> and change the register range of gpio0 to fix the hardware design.
>
>
On Fri, Oct 2, 2020 at 4:56 PM Matthias Brugger wrote:
>
>
>
> On 01/10/2020 18:01, Enric Balletbo i Serra wrote:
> > From: Matthias Brugger
> >
> > Apart from the infracfg block, the SMI block is used to enable the bus
> > protection for some power domains. Add support for this block.
> >
> >
Currently, init_listener() tries to prevent adding a filter with
SECCOMP_FILTER_FLAG_NEW_LISTENER if one of the existing filters already
has a listener. However, this check happens without holding any lock that
would prevent another thread from concurrently installing a new filter
(potentially
On Fri, Oct 2, 2020 at 12:02 AM Enric Balletbo i Serra
wrote:
>
> The System Control Processor System (SCPSYS) has several power management
> related tasks in the system. This driver implements support to handle
> the different power domains supported in order to meet high performance
> and low
On Sat, Oct 3, 2020 at 11:30 PM Michel Lespinasse wrote:
> Unrelated to the above: copy_from_user and copy_to_user should not be
> called with mmap_lock held; it may be worth adding these assertions
> too (probably in separate patches) ?
We already have that: All (hopefully?) the userspace
On Mon, Oct 05, 2020 at 02:41:53AM +0300, Jarkko Sakkinen wrote:
> On Sun, Oct 04, 2020 at 11:27:50PM +0100, Matthew Wilcox wrote:
> > int ret = 0;
> >
> > mutex_lock(>lock);
> > rcu_read_lock();
>
> Right, so xa_*() take RCU lock implicitly and xas_* do not.
Not necessarily the RCU
Here is the updated patch using sprintf, diffing from the original patch by
Xiongfeng Wang.
[PATCH] test_power: revise parameter printing to use sprintf
Signed-off-by: Harley A.W. Lorenzo
Suggested-by: Joe Perches
---
drivers/power/supply/test_power.c | 27 ++-
1 file
On Thu, Oct 1, 2020 at 11:03 PM Matthias Brugger wrote:
>
>
>
> On 28/09/2020 05:31, Nicolas Boichat wrote:
> > In the error case, where a power domain cannot be powered on
> > successfully at boot time (in mtk_register_power_domains),
> > pm_genpd_init would still be called with is_off=false,
Consider the following transcript:
$ keyctl add trusted kmk "new 32 blobauth=helloworld keyhandle=8000
migratable=1" @u
add_key: Invalid argument
The documentation has the following description:
migratable= 0|1 indicating permission to reseal to new PCR values,
default
When TPM 2.0 trusted keys code was moved to the trusted keys subsystem,
the operations were unwrapped from tpm_try_get_ops() and tpm_put_ops(),
which are used to take temporarily the ownership of the TPM chip. The
ownership is only taken inside tpm_send(), but this is not sufficient,
as in the key
When tpm_get_random() was introduced, it defined the following API for the
return value:
1. A positive value tells how many bytes of random data was generated.
2. A negative value on error.
However, in the call sites the API was used incorrectly, i.e. as it would
only return negative values and
On Tue, Sep 29, 2020 at 01:04:49PM -0400, Steven Rostedt wrote:
> On Tue, 29 Sep 2020 09:56:40 -0700
> "Paul E. McKenney" wrote:
>
> > > Well, I think we should actually apply both, but the comment needs to be
> > > updated, as it will no longer be outside recursion. And the comment is
> > >
On Sun, Oct 4, 2020 at 3:15 PM Daniel Vetter wrote:
>
> On Sun, Oct 4, 2020 at 9:21 PM Rob Clark wrote:
> >
> > From: Rob Clark
> >
> > Rather than relying on the big dev->struct_mutex hammer, introduce a
> > more specific lock for protecting the bo lists.
> >
> > Signed-off-by: Rob Clark
> >
On 2020-10-04 23:22 +0800, Coiby Xu wrote:
> On Sat, Oct 03, 2020 at 02:53:48PM +0900, Benjamin Poirier wrote:
> > On 2020-10-03 07:59 +0800, Coiby Xu wrote:
> > > This fixes commit 0107635e15ac
> > > ("staging: qlge: replace pr_err with netdev_err") which introduced an
> > > build breakage of
The only usages of mptcp_pm_ops is to assign its address to the small_ops
field of the genl_family struct, which is a const pointer, and applying
ARRAY_SIZE() on it. Make it const to allow the compiler to put it in
read-only memory.
Signed-off-by: Rikard Falkeborn
---
net/mptcp/pm_netlink.c | 2
The only usage of these is to assign their address to the small_ops field
in the genl_family struct, which is a const pointer, and applying
ARRAY_SIZE() on them. Make them const to allow the compiler to put them
in read-only memory.
Signed-off-by: Rikard Falkeborn
---
Make a couple of static struct genl_small_ops const to allow the compiler
to put them in read-only memory. Patches are independent.
v2: Rebase on net-next, genl_ops -> genl_small_ops
Rikard Falkeborn (2):
mptcp: Constify mptcp_pm_ops
net: openvswitch: Constify static struct genl_small_ops
Hi Eli,
First bad commit (maybe != root cause):
tree: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
master
head: 22fbc037cd32e4e6771d2271b565806cfb8c134c
commit: 1a86b377aa2147a7c866b03142e848c18e5f3cb8 vdpa/mlx5: Add VDPA driver for
supported mlx5 devices
date: 9
On Sun, Oct 04, 2020 at 11:27:50PM +0100, Matthew Wilcox wrote:
> On Mon, Oct 05, 2020 at 12:50:49AM +0300, Jarkko Sakkinen wrote:
> > What is shoukd take is encl->lock.
> >
> > The loop was pre-v36 like:
> >
> > idx_start = PFN_DOWN(start);
> > idx_end = PFN_DOWN(end - 1);
> >
> >
On Sun, Oct 04, 2020 at 11:47:26AM -0700, Tom Rix wrote:
>
> On 10/3/20 10:14 PM, Moritz Fischer wrote:
> > Simplify registration using new devm_fpga_mgr_register() API.
> > Remove the now obsolete altera_pr_unregister() function.
> >
> > Signed-off-by: Moritz Fischer
> > ---
> >
> > We should
On Sun, Oct 04, 2020 at 11:22:31AM -0700, Tom Rix wrote:
>
> On 10/3/20 10:14 PM, Moritz Fischer wrote:
> > Simplify registration using new devm_fpga_mgr_register() API.
> >
> > Signed-off-by: Moritz Fischer
> > ---
> > drivers/fpga/dfl-fme-mgr.c | 12 +---
> > 1 file changed, 1
On Fri, Oct 02, 2020 at 10:35:45PM -0400, Jon Masters wrote:
> On 10/1/20 12:15 PM, Alan Stern wrote:
> > On Wed, Sep 30, 2020 at 09:51:16PM -0700, Paul E. McKenney wrote:
> > > Hello!
> > >
> > > Al Viro posted the following query:
> > >
> > >
On Sat, Oct 03, 2020 at 09:22:12AM -0400, Alan Stern wrote:
> To expand on my statement about the LKMM's weakness regarding control
> constructs, here is a litmus test to illustrate the issue. You might
> want to add this to one of the archives.
>
> Alan
>
> C crypto-control-data
> (*
> * LB
On Thu, 01 Oct 2020 12:05:57 PDT (-0700), Atish Patra wrote:
RISC-V limits the physical memory size by -PAGE_OFFSET. Any memory beyond
that size from DRAM start is unusable. Just remove any memblock pointing
to those memory region without worrying about computing the maximum size.
On Thu, 01 Oct 2020 12:04:56 PDT (-0700), Atish Patra wrote:
Currently, the memory containing DT is not reserved. Thus, that region
of memory can be reallocated or reused for other purposes. This may result
in corrupted DT for nommu virt board in Qemu. We may not face any issue
in kendryte as
Hi Sameer
> > This is just an idea,
> > but can we use hooks here somehow ?
> >
> > .ops_hook_pre
> > .ops_hook_func
> > .ops_hook_post
> >
> > if (priv->ops_hook_pre->func)
> > priv->ops_hook_pre->func_pre(...);
> >
> > if
So things have been pretty calm, and rc8 is fairly small. I'm still
waiting for a networking pull with some fixes, so it's not like I
could have made a final 5.9 release even if I had wanted to, but there
was nothing scary going on this past week, and it all feels ready for
a final 5.9 next
On Sun, Oct 04, 2020 at 02:44:39PM +, Alex Belits wrote:
> On Thu, 2020-10-01 at 15:56 +0200, Frederic Weisbecker wrote:
> > External Email
> >
> > ---
> > ---
> > On Wed, Jul 22, 2020 at 02:49:49PM +, Alex Belits wrote:
> >
1 - 100 of 346 matches
Mail list logo