Hi!
> > > The node names for devices using the pwm-leds driver follow a certain
> > > naming scheme (now). Parent node name is not enforced, but recommended
> > > by DT project.
> > >
> > > DTC Documentation/devicetree/bindings/mfd/iqs62x.example.dt.yaml
> > > CHECK Documentation/devic
On 31.12.2020 05:07, Lukas Wunner wrote:
> On Wed, Dec 30, 2020 at 11:56:04PM +0100, Heiner Kallweit wrote:
>> --- a/drivers/pci/pci.c
>> +++ b/drivers/pci/pci.c
>> @@ -3024,7 +3024,9 @@ void pci_pm_init(struct pci_dev *dev)
>> u16 status;
>> u16 pmc;
>>
>> -pm_runtime_forbid(&dev->
On Thu, Dec 31, 2020 at 12:10:34PM +0300, Serge Semin wrote:
> On Thu, Dec 31, 2020 at 09:51:21AM +0100, Greg Kroah-Hartman wrote:
> > On Thu, Dec 31, 2020 at 11:49:56AM +0300, Serge Semin wrote:
> > > Hello Greg,
> > > The next patch has been created to supersede the one you've applied:
> > > http
On Thu, Dec 17, 2020 at 10:26:23AM +0800, Wen Yang wrote:
>
>
> 在 2020/12/4 上午2:31, Wen Yang 写道:
> > The dentries such as /proc//ns/ have the DCACHE_OP_DELETE flag, they
> > should be deleted when the process exits.
> >
> > Suppose the following race appears:
> >
> > release_task
On Thu, Dec 31, 2020 at 01:24:35PM +0530, Manivannan Sadhasivam wrote:
> On Tue, Dec 29, 2020 at 11:17:15PM +0200, Cristian Ciocaltea wrote:
> > Hi,
> >
> > This patchset brings a series of improvements for the Actions Semi S500
> > SoCs family, by adding support for Clock & Reset Management Units
On Thu, Dec 31, 2020 at 09:51:21AM +0100, Greg Kroah-Hartman wrote:
> On Thu, Dec 31, 2020 at 11:49:56AM +0300, Serge Semin wrote:
> > Hello Greg,
> > The next patch has been created to supersede the one you've applied:
> > https://lore.kernel.org/linux-spi/20201127144612.4204-1-sergey.se...@baikal
On 12/30/20 2:51 PM, Mark Brown wrote:
> On Wed, Dec 30, 2020 at 12:19:03AM +0100, Bert Vermeulen wrote:
>
>> +properties:
>> + compatible:
>> +const: realtek,spi
>
> It is possibled Realtek might make other SPI controllers, there should
> be some more specific name such as a compatible for
To increase methods to dump more tm info, adds three debugfs commands
to dump tm info of nodes, priority and qset. And a new tm file of debugfs
is created for only dumping tm info.
Unlike previous debugfs commands, to dump each tm information, user needs
to enter two commands now. The first comman
On Thu, Dec 31, 2020 at 12:57:10PM +0530, Manivannan Sadhasivam wrote:
> On Tue, Dec 29, 2020 at 11:17:26PM +0200, Cristian Ciocaltea wrote:
> > Add uSD support for RoseapplePi SBC using a fixed regulator as a
> > temporary solution until PMIC support becomes available.
> >
> > Signed-off-by: Cris
Hi Shemming,
On 2020-12-31 06:28, Shenming Lu wrote:
When the EnableLPIs bit is set to 0, any ITS LPI requests in the
Redistributor would be ignored. And this check is independent from
the ITS LPI translation. So it might be better to move the check
of the EnableLPIs bit out of the LPI resolving
ecause clk_disable_unprepare() already checked NULL clock parameter,
so the additional check is unnecessary, just remove it.
Signed-off-by: Xu Wang
---
drivers/iio/adc/stm32-dfsdm-core.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/iio/adc/stm32-dfsdm-core.c
b/d
On Wed, Dec 30, 2020 at 08:52:15PM +, Timon Baetz wrote:
> Register for extcon notification and set charging current depending on
> the detected cable type. Current values are taken from vendor kernel,
> where most charger types end up setting 650mA [0].
>
> Also enable and disable the CHARGER
On Thu, Dec 31, 2020 at 11:49:56AM +0300, Serge Semin wrote:
> Hello Greg,
> The next patch has been created to supersede the one you've applied:
> https://lore.kernel.org/linux-spi/20201127144612.4204-1-sergey.se...@baikalelectronics.ru/
> Mark has already merged it in his repo.
Ok, so should tha
Add stubs for extcon_register_notifier_all() function for !CONFIG_EXTCON
case. This is useful for compile testing and for drivers which use
EXTCON but do not require it (therefore do not depend on CONFIG_EXTCON).
Fixes: 815429b39d94 ("extcon: Add new extcon_register_notifier_all() to monitor
all
Hello Greg,
The next patch has been created to supersede the one you've applied:
https://lore.kernel.org/linux-spi/20201127144612.4204-1-sergey.se...@baikalelectronics.ru/
Mark has already merged it in his repo.
-Sergey
On Mon, Dec 28, 2020 at 01:42:12PM +0100, Greg Kroah-Hartman wrote:
> From: R
On Wed, 30 Dec 2020, Pavel Machek wrote:
> Hi!
>
> > The node names for devices using the pwm-leds driver follow a certain
> > naming scheme (now). Parent node name is not enforced, but recommended
> > by DT project.
> >
> > DTC Documentation/devicetree/bindings/mfd/iqs62x.example.dt.yaml
On Wed, Dec 30, 2020 at 07:10:16PM +0100, Christian Labisch wrote:
> Update :
>
> I've just tested the kernel 5.10.4 from ELRepo.
> Unfortunately nothing changed - still no sound.
Ah, sad. Can you run 'git bisect' between 5.9 and 5.10 to determine the
commit that caused the problem?
thanks,
gr
documented in
> > https://git-scm.com/docs/git-format-patch]
> >
> > url:
> > https://github.com/0day-ci/linux/commits/Timon-Baetz/extcon-max8997-Add-CHGINS-and-CHGRM-interrupt-handling/20201231-045812
> > base:
> > https://git.kernel.org/pub/scm/linux
On Wed, Dec 30, 2020 at 04:44:15PM +0100, Arnd Bergmann wrote:
> From: Arnd Bergmann
>
> Clang points out a code path that returns an undefined value
> in an error case:
>
> sound/soc/fsl/imx-hdmi.c:165:6: error: variable 'ret' is used uninitialized
> whenever 'if' condition is true [-Werror,-W
201 - 219 of 219 matches
Mail list logo