Have you considered using NTP (Network Time Protocol)?
A.Sajjad Zaidi
Eric Gillespie wrote:
> First off, CC: back to me, as my machine can't handle an estimated 200
> messages a day for me to sign up to the list 8-( - Anyway..
>
> I updated my kernel to 2.4.3 when the patch
Have you considered using NTP (Network Time Protocol)?
A.Sajjad Zaidi
Eric Gillespie wrote:
First off, CC: back to me, as my machine can't handle an estimated 200
messages a day for me to sign up to the list 8-( - Anyway..
I updated my kernel to 2.4.3 when the patch was released
A-66) and havent
gotten anything yet. Buffered disk reads are still about 36.50 MB/sec on the
raid5 device, so its fast enough for what I need.
Next step is to see how well Reiserfs works here.
Thank you everyone who has helped.
A.Sajjad Zaidi
-
To unsubscribe from this list: send the line &q
Mark Hahn wrote:
> > drives (all IBM-DTLA307045 s) that I realised that the cylinder/head
> > translation is different and I cant use the whole drive unless its
> > partitioned while attached to the other IDE ports.
>
> no, it's just that the bios doesn't perform the LBA geometry lie
> outside
everything is fine, but hdparm gives me a mere 8.xx
MB/s transfer rate.
Anyone else have very similar problems?
A.Sajjad Zaidi
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.tux.org/lkml/
everything is fine, but hdparm gives me a mere 8.xx
MB/s transfer rate.
Anyone else have very similar problems?
A.Sajjad Zaidi
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.tux.org/lkml/
Mark Hahn wrote:
drives (all IBM-DTLA307045 s) that I realised that the cylinder/head
translation is different and I cant use the whole drive unless its
partitioned while attached to the other IDE ports.
no, it's just that the bios doesn't perform the LBA geometry lie
outside the
reads are still about 36.50 MB/sec on the
raid5 device, so its fast enough for what I need.
Next step is to see how well Reiserfs works here.
Thank you everyone who has helped.
A.Sajjad Zaidi
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of
8 matches
Mail list logo