Hi,
I'm using reiser4 happily on my workstation for several month now. We'd just
wanted to try it on a server now. The setup is as follows:
Fujistu RX100S2 Server, P4 3,2Ghz with HT. 1GB Ram.
Two Local HDD, on a Fasttrack TX4 Software Raid controller.
Both have 3 raid partitions, two for /, two
Hi,
I'm using reiser4 happily on my workstation for several month now. We'd just
wanted to try it on a server now. The setup is as follows:
Fujistu RX100S2 Server, P4 3,2Ghz with HT. 1GB Ram.
Two Local HDD, on a Fasttrack TX4 Software Raid controller.
Both have 3 raid partitions, two for /, two
Am Mittwoch, 13. April 2005 15:54 schrieb Alex Zarochentsev:
> please provide more information about the system (.config, h/w
> configuration) and how the fs was resized. were there other error messages
> in the syslog right before the crash?
.config attached. H/W is a scsi-raid5 (GDT) lspci:
Hi,
after resizing a reiserfs partition, the next cvs process produced:
Unable to handle kernel NULL pointer dereference at virtual address
printing eip:
c0192701
*pde =
Oops: [#1]
PREEMPT
Modules linked in: usbserial md5 ipv6 sk98lin
CPU:0
EIP:0060:[]Not
Hi,
after resizing a reiserfs partition, the next cvs process produced:
Unable to handle kernel NULL pointer dereference at virtual address
printing eip:
c0192701
*pde =
Oops: [#1]
PREEMPT
Modules linked in: usbserial md5 ipv6 sk98lin
CPU:0
EIP:0060:[c0192701]
Am Mittwoch, 13. April 2005 15:54 schrieb Alex Zarochentsev:
please provide more information about the system (.config, h/w
configuration) and how the fs was resized. were there other error messages
in the syslog right before the crash?
.config attached. H/W is a scsi-raid5 (GDT) lspci:
Hi,
while umounting an ext2 partition on a usb hdd I'm getting:
scheduling while atomic: umount/0x1001/14941
[] schedule+0x5f2/0x600
[] cond_resched+0x27/0x40
[] invalidate_mapping_pages+0x81/0xe0
[] kill_bdev+0xd/0x20
[] __set_blocksize+0x85/0xa0
[] __bd_release+0x70/0x80
[]
Hi,
while umounting an ext2 partition on a usb hdd I'm getting:
scheduling while atomic: umount/0x1001/14941
[c0451392] schedule+0x5f2/0x600
[c0451cc7] cond_resched+0x27/0x40
[c0140af1] invalidate_mapping_pages+0x81/0xe0
[c015b27d] kill_bdev+0xd/0x20
[c015b315] __set_blocksize+0x85/0xa0
Am Dienstag, 15. März 2005 07:57 schrieb Denis Vlasenko:
> Use strace -tt to find out whether kwrite spends that much CPU
> by doing zillions of syscalls or not.
Actually pdflush always kicks in after a write call. Summary:
% time seconds usecs/call callserrors syscall
--
Am Dienstag, 15. März 2005 07:57 schrieb Denis Vlasenko:
Use strace -tt to find out whether kwrite spends that much CPU
by doing zillions of syscalls or not.
Actually pdflush always kicks in after a write call. Summary:
% time seconds usecs/call callserrors syscall
--
-version
> > > Qt: 3.2.1
> > > KDE: 3.1.4
> > > KWrite: 4.1
> > >
> > > Thanks,
> > > Lena.
> > >
> > > >Begin forwarded message:
> > > >
> > > >Date: Fri, 4 Mar 2005 02:24:36 +0100
> > >
kde version:
> [EMAIL PROTECTED]:~> kwrite --version
> Qt: 3.2.1
> KDE: 3.1.4
> KWrite: 4.1
>
> Thanks,
> Lena.
>
> >Begin forwarded message:
> >
> >Date: Fri, 4 Mar 2005 02:24:36 +0100
> >From: Alexander Gran <[EMAIL PROTECTED]>
> >To: linux-kern
Qt: 3.2.1
KDE: 3.1.4
KWrite: 4.1
Thanks,
Lena.
Begin forwarded message:
Date: Fri, 4 Mar 2005 02:24:36 +0100
From: Alexander Gran [EMAIL PROTECTED]
To: linux-kernel@vger.kernel.org
Subject: 2.6.11-rc5-mm1: reiser4 eating cpu time
Hi,
I have a reiser4 partition on a local IDE
on ext2 filesystem?
I have the following kde version:
[EMAIL PROTECTED]:~ kwrite --version
Qt: 3.2.1
KDE: 3.1.4
KWrite: 4.1
Thanks,
Lena.
Begin forwarded message:
Date: Fri, 4 Mar 2005 02:24:36 +0100
From: Alexander Gran [EMAIL PROTECTED]
To: linux
Am Freitag, 4. März 2005 02:16 schrieb Alexander Gran:
> Hi,
>
> after my external USB hdd disconnected itself reiser4 paniced. I dont think
> a journalingfs should panic if its device fails..
Ähm correction: It's reiser4 on dm-crypto (aes) The crypto device is of cource
not ra
Hi,
I have a reiser4 partition on a local IDE disk. I opened a 130MB textfile with
kwrite, and killed it while ot opened the file (took to long...) diskio was
finished at this point.
a [ent:hda6.] Process was eating 100% CPU time for several (54) seconds.
Is this a normal, expected behaviour?
Hi,
after my external USB hdd disconnected itself reiser4 paniced. I dont think a
journalingfs should panic if its device fails..
Log:
scsi2 (0:0): rejecting I/O to dead device
reiser4[ktxnmgrd:dm-0:t(25324)]: reiser4_handle_error
(fs/reiser4/vfs_ops.c:1315)[foobar-42]:
reiser4 panicked
Am Donnerstag, 3. März 2005 09:12 schrieb Vladimir Saveliev:
> > http://zodiac.dnsalias.org/misc/crashlog
>
> I get "You do not have permission to access this document." trying to
> access it.
wrong file permissions. fixxed by now. My mistake...
regards
Alex
--
Encrypted Mails welcome.
PGP-Key
Am Donnerstag, 3. März 2005 09:12 schrieb Vladimir Saveliev:
http://zodiac.dnsalias.org/misc/crashlog
I get You do not have permission to access this document. trying to
access it.
wrong file permissions. fixxed by now. My mistake...
regards
Alex
--
Encrypted Mails welcome.
PGP-Key at
Hi,
after my external USB hdd disconnected itself reiser4 paniced. I dont think a
journalingfs should panic if its device fails..
Log:
scsi2 (0:0): rejecting I/O to dead device
reiser4[ktxnmgrd:dm-0:t(25324)]: reiser4_handle_error
(fs/reiser4/vfs_ops.c:1315)[foobar-42]:
reiser4 panicked
Hi,
I have a reiser4 partition on a local IDE disk. I opened a 130MB textfile with
kwrite, and killed it while ot opened the file (took to long...) diskio was
finished at this point.
a [ent:hda6.] Process was eating 100% CPU time for several (54) seconds.
Is this a normal, expected behaviour?
Am Freitag, 4. März 2005 02:16 schrieb Alexander Gran:
Hi,
after my external USB hdd disconnected itself reiser4 paniced. I dont think
a journalingfs should panic if its device fails..
Ähm correction: It's reiser4 on dm-crypto (aes) The crypto device is of cource
not radable either: Buffer I
Hi,
i''ve got an external USB 2.0 HDD. First 120GB Partition is AES encrypted
reiser4. I just got LOADS of errors. syslogd is still writing them to disk.
I have no idea whats happening here.
reiser4 paniced, usb told me "ehci_hcd :00:1d.7: devpath 4 ep2out
3strikes" and SCSI emulation had
Hi,
i''ve got an external USB 2.0 HDD. First 120GB Partition is AES encrypted
reiser4. I just got LOADS of errors. syslogd is still writing them to disk.
I have no idea whats happening here.
reiser4 paniced, usb told me ehci_hcd :00:1d.7: devpath 4 ep2out
3strikes and SCSI emulation had
e enabled the firmware loader that fixes at least the compile error...
Now rebooting. More info after my system programming exam in 1 hour. ;)
regards
Alex
> Begin forwarded message:
>
> Date: Tue, 1 Mar 2005 11:35:40 +0100
> From: Alexander Gran <[EMAIL PROTECTED]>
> To: A
the firmware loader that fixes at least the compile error...
Now rebooting. More info after my system programming exam in 1 hour. ;)
regards
Alex
Begin forwarded message:
Date: Tue, 1 Mar 2005 11:35:40 +0100
From: Alexander Gran [EMAIL PROTECTED]
To: Andrew Morton [EMAIL PROTECTED]
Subject: Re
Hi folks,
something esspecially for our german speakers:
http://translate.google.com/translate?hl=de=en=http://members.optusnet.com.au/ckolivas/kernel/=/search%3Fq%3Dlinux%2Bkernel%2Bhighmem%2B1Gb%26hl%3Dde%26lr%3D%26ie%3DUTF-8%26c2coff%3D1
SCNR
Alex
--
Encrypted Mails welcome.
PGP-Key at
Hi folks,
something esspecially for our german speakers:
http://translate.google.com/translate?hl=desl=enu=http://members.optusnet.com.au/ckolivas/kernel/prev=/search%3Fq%3Dlinux%2Bkernel%2Bhighmem%2B1Gb%26hl%3Dde%26lr%3D%26ie%3DUTF-8%26c2coff%3D1
SCNR
Alex
--
Encrypted Mails welcome.
PGP-Key
28 matches
Mail list logo
