Good to know that somebody still uses the Ultrastor 14f board :).
Yes, this typo was introduced by somebody doing massive editing to all
scsi drivers long ago.
Cheers,
--db
-Original Message-
From: Roel Kluin [mailto:[EMAIL PROTECTED]
Sent: Monday, February 04, 2008 11:37 PM
To:
Good to know that somebody still uses the Ultrastor 14f board :).
Yes, this typo was introduced by somebody doing massive editing to all
scsi drivers long ago.
Cheers,
--db
-Original Message-
From: Roel Kluin [mailto:[EMAIL PROTECTED]
Sent: Monday, February 04, 2008 11:37 PM
To:
I just tested test11-pre2 and there is no improvement. I still need to issue
the
ifconfig eth0 -multicast
and just after it the xircom_tulip card begins to work.
-db
-Original Message-
From: Jeff Garzik [mailto:[EMAIL PROTECTED]]
Sent: Friday, November 10, 2000 5:19 PM
To: [EMAIL
In order to have the xircom_tulip pcmcia cardbus working again with
recent kernels, it is necessary to specify:
ifconfig eth0 -multicast
Moreover if the card is configured by itself into the kernel
(i.e. with the default ne2000 pcmcia support removed),
the enclosed patch is required as well.
In order to have the xircom_tulip pcmcia cardbus working again with
recent kernels, it is necessary to specify:
ifconfig eth0 -multicast
Moreover if the card is configured by itself into the kernel
(i.e. with the default ne2000 pcmcia support removed),
the enclosed patch is required as well.
I just tested test11-pre2 and there is no improvement. I still need to issue
the
ifconfig eth0 -multicast
and just after it the xircom_tulip card begins to work.
-db
-Original Message-
From: Jeff Garzik [mailto:[EMAIL PROTECTED]]
Sent: Friday, November 10, 2000 5:19 PM
To: [EMAIL
6 matches
Mail list logo
