On Wed, Oct 18, 2000 at 12:34:18AM +0200, Kenneth Johansson wrote:
> Same problem I have. I used to work for me and I have not changed anything.
> But other people are complaining on problems to burn faster than speed=4 and
> I can't even see the drive ??
yep if at least i could see the drive and
> I am looking into this, and it really is looking like there's a low
> level driver bug somewhere either EIOing an interrupt twice, or missing
> one. Were you doing Network I/O at the time? Check 'ifconfig' when you
the machine is also my local masquerade server there are 2 ehternet
cards..
hello,
strange thing, wanted to burn some data ... but i do not see the CD
anymore tryed to use the CD in ide-mode nothing...
looked in /proc/ide no devices. so for some obscure reason the
CD-player isn't found now i didn't use that thing very much, but it
worked not so long ago.
On Thu, Oct 05, 2000 at 11:56:30PM +0200, Mikael Pettersson wrote:
> On Wed, 4 Oct 2000, Jeff Nguyen wrote:
>
> >Hi Alan.
> >
> >I hope you will consider to integrate Andre IDE patche into the 2.2.18 or
> >2.2.19 kernel.
PLEASE NOT ! the 2.4 IDE driver isn't working for me at all!! at the
con
On Wed, Oct 04, 2000 at 01:53:34AM -0700, David Ford wrote:
> When you enable PIIXn support in the IDE section, make sure you DISABLE PIIXn
> tuning which is the very next line.
ok i even tryed with a freshly downloaded complete 2.4-test9 tree.
nothing to do: just before init comes, i get:
id
On Tue, Oct 03, 2000 at 09:40:24AM -0400, Mark Hahn wrote:
Hi again...
now i shoould have exactly the same settings as you, (can be checked at
ftp://yoda.u-strasbg.fr/pub/erm7-kernel2.4-test9.config) and still,
i get the message
ide_dmaproc: chipset supported ide_dma_lostirq func only : 13
hello,
next try.
i am still unable to boot off a 2.4-test8 kernel until test4 all was
fine, i see the same messages as the now running 2.2.15 kernel,
nevertheless on reaching the init-step, somehow the kernel loses the
interrupt in 2.4-testx
i did finally identify my chipset, at le
hello,
i still have the problem that my kernel 2.4-test7/8 doesn't boot: just
before the init-process launches, i only get lots of 'hda lost
interrupt'
test4 ran fine so as all 2.2...
my config file is in
ftp://yoda.u-strasbg.fr/pub/erm7-kernel2.4-test8.config
an lspci gives the followi
hello,
i was running test4 fine, but the last kernel i compiled test8 and test7
have the same behaviour: after the kernel boots and before the INIT
process begins, all comes ot a grinding halt, gratifying me only with
repeated hda lost interrupt.
my config file is in
ftp://yoda.u-strasbg.fr/p
9 matches
Mail list logo
