Michael Tokarev wrote on LKML:
Wander Winkelhorst wrote:
On 6/12/07, Michael Tokarev <[EMAIL PROTECTED]> wrote:
I bought a VIA PC2500 board a few days ago - this
new series of their mobos,
This beast looks nice - after replacing their cooling
system (that had a small fan on it) with
Michael Tokarev wrote on LKML:
Wander Winkelhorst wrote:
On 6/12/07, Michael Tokarev [EMAIL PROTECTED] wrote:
I bought a VIA PC2500 board a few days ago - this
new series of their mobos,
This beast looks nice - after replacing their cooling
system (that had a small fan on it) with
Hello Artur,
I purchased C7 VIA Esther and I experience similar problem with
random crashes. There is also a thread on Via Arena about "J7F4K -
Hard Lockups" where people describe the same issue:
http://forums.viaarena.com/messageview.aspx?catid=28=77032
I've tried the following
Hello Artur,
I purchased C7 VIA Esther and I experience similar problem with
random crashes. There is also a thread on Via Arena about J7F4K -
Hard Lockups where people describe the same issue:
http://forums.viaarena.com/messageview.aspx?catid=28threadid=77032
I've tried the following
Simon Arlott schrieb:
On 19/05/07 23:36, Christian Volkmann wrote:
Christian Volkmann wrote:
Claas asked for the NX flag for the Via C3 (?) processors
in another thread.
If you read the other thread properly you'd see that the BIOS has an
option to enable or disable it... when enabled it
Simon Arlott schrieb:
On 19/05/07 23:36, Christian Volkmann wrote:
Christian Volkmann wrote:
Claas asked for the NX flag for the Via C3 (?) processors
in another thread.
If you read the other thread properly you'd see that the BIOS has an
option to enable or disable it... when enabled it
Christian Volkmann wrote:
your patch did not work. See the correction below. The mask should contain 1<<1
instead of 1.
Model 10 is now also included.
I can confirm that it works now.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL
Christian Volkmann wrote:
Hi Andi,
your patch did not work. See the correction below. The mask should contain 1<<1
instead of 1.
Model 10 is now also included.
I add also a patch for setup.S. It does not print the CPUID message in case
the CPUID is wrong, cause %ds was not set proper.
Hello Andi!
Can someone please test if this patch works?
it applies cleanly to 2.6.22-rc1-mm1
Could you make it also enable C7 CMPXCHG8 (cx8)?
This is because I am getting this error (as written in a diffent posting
on this mailinglist)
> This kernel requires the following features not
Hello Andi!
Can someone please test if this patch works?
it applies cleanly to 2.6.22-rc1-mm1
Could you make it also enable C7 CMPXCHG8 (cx8)?
This is because I am getting this error (as written in a diffent posting
on this mailinglist)
This kernel requires the following features not
Christian Volkmann wrote:
Hi Andi,
your patch did not work. See the correction below. The mask should contain 11
instead of 1.
Model 10 is now also included.
I add also a patch for setup.S. It does not print the CPUID message in case
the CPUID is wrong, cause %ds was not set proper.
Hello
Christian Volkmann wrote:
your patch did not work. See the correction below. The mask should contain 11
instead of 1.
Model 10 is now also included.
I can confirm that it works now.
-
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to [EMAIL
H. Peter Anvin schrieb:
Claas Langbehn wrote:
Now my question is:
Would it be possible to override the BIOS settings of cx8 and nx and
activate it with linux anyway?
The CPU supports it and I don't see any reason to disable it.
Yes, that code is already in the git.newsetup tree
H. Peter Anvin schrieb:
Claas Langbehn wrote:
Now my question is:
Would it be possible to override the BIOS settings of cx8 and nx and
activate it with linux anyway?
The CPU supports it and I don't see any reason to disable it.
Yes, that code is already in the git.newsetup tree
Hello!
This is bug 8142. Please see http://bugzilla.kernel.org/show_bug.cgi?id=8142
claas
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the
Alan Cox wrote:
Concerning the crashes I already changed the memory module, but with no
success. I'm not sure
wether this is a hardware or software bug.
Testing with memtest86 should help tell you if the problem is a dodgy
DIMM specifically rather than another hardware or software fault.
Hello,
I have got a VIA EPIA EX15000G Mini-ITX mainboard with a C7 VIA Esther
processor (1500MHz).
There are two options in the BIOS that affect CPU feature flags:
C7 CMPXCHG8 - enable/disable (Disable to install windows NT 4.0) and
C7 No Execute (NX) - enable/disable
I enabled both and
Hello,
I have got a VIA EPIA EX15000G Mini-ITX mainboard with a C7 VIA Esther
processor (1500MHz).
There are two options in the BIOS that affect CPU feature flags:
C7 CMPXCHG8 - enable/disable (Disable to install windows NT 4.0) and
C7 No Execute (NX) - enable/disable
I enabled both and
Alan Cox wrote:
Concerning the crashes I already changed the memory module, but with no
success. I'm not sure
wether this is a hardware or software bug.
Testing with memtest86 should help tell you if the problem is a dodgy
DIMM specifically rather than another hardware or software fault.
Hello!
This is bug 8142. Please see http://bugzilla.kernel.org/show_bug.cgi?id=8142
claas
-
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ
On Thu, Jan 04, 2001 at 04:52:49PM -0500, Chris Mason wrote:
> This patch is meant to be applied on top of the reiserfs
> 3.6.23 patch to get everything working in the new prerelease
> kernels. The order is:
>
> untar linux-2.4.0-prerelease.tar.bz2
> apply linux-2.4.0-test12-reiserfs-3.6.23.gz
On Thu, Jan 04, 2001 at 04:52:49PM -0500, Chris Mason wrote:
This patch is meant to be applied on top of the reiserfs
3.6.23 patch to get everything working in the new prerelease
kernels. The order is:
untar linux-2.4.0-prerelease.tar.bz2
apply linux-2.4.0-test12-reiserfs-3.6.23.gz
apply
22 matches
Mail list logo
