Hi,
> >
> > I do nightly backups on tape. Every 3 to 4 weeks a process is stuck in
> > D state while accessing the drive:
> >
> > 12398 ?D 0:00 /usr/sbin/amcheck -ms daily
> >
> > There are no messages in the log. Only a reboot can remove this process.
>
> Next time it happens,
Hi,
I do nightly backups on tape. Every 3 to 4 weeks a process is stuck in
D state while accessing the drive:
12398 ?D 0:00 /usr/sbin/amcheck -ms daily
There are no messages in the log. Only a reboot can remove this process.
lsscsi --long
[0:0:0:0]tapeTANDBERG TDC 4222
Hi,
Since I switched to the kernel nfsd I have troubles exporting my
filesystems. I think in kernel 2.2.x there was no problem, neither was
it with the userspace nfsd. Currently I run kernel 2.4.5pre1 on the
server.
1. When I try to boot one of my diskless clients (kernel 2.0.34), it mounts
its
Hi,
in case it isn't already known:
isdn_net.c: In function `isdn_ciscohdlck_dev_ioctl':
isdn_net.c:1455: structure has no member named `cisco_keepalive_period'
Relevant config:
#
# ISDN subsystem
#
CONFIG_ISDN=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_ISDN_PPP_BSDCOMP
Hi,
when I came to my computer this morning, I noticed that the file
~/.netscape/history.dat was missing. So I tried to copy over a backup
copy from another computer and got "permission denied". I realized that
the file was still there but not accessible at all, even by root.
Here's an strace of
Hi,
I got an oops with 2.4.0-ac2. It said "Kernel Panic: Attempt to kill init"
or similar. The oops didn't make it into the log but I photographed it
and reconstructed it from the photos (USB digital cams are a great thing
:-). After the oops, the machine was still responsive to SysRq and ping
bu
Hi Urban,
> Anyway,
> gdb is doing strange things to your testprogram on ext2 as well. Does it
> work for you? I have not been able to reproduce a gdb hang (you do know
> that there is a while(1); in main ... ;-), but it generates a lot of smbfs
> messages and in one case made smbfs stop working.
Hi,
Urban Widmark wrote:
> I don't really know how signal delivery works within the kernel, but
> smb_trans2_request tries to disable some signals. That does not work
> (completely?) so either it needs fixing or the -512 errno needs to be
> handled.
>
> Why so bad in gdb? perhaps it causes more
Hi,
I hava a strange problem with smbfs. My application creates threads
that copy files from a mounted SMB share to the local disk. When
I run the application normally, there's no problem. However when
I run it in gdb 4.18 or 5.0, one of the threads goes into the D state
(not always), and the who
Hi,
I got the following timeout on an SMP system:
3c59x.c:LK1.1.9 2 Sep 2000 Donald Becker and others.
http://www.scyld.com/network/vortex.html $Revision: 1.102.2.38 $
See Documentation/networking/vortex.txt
eth0: 3Com PCI 3c900 Boomerang 10Mbps Combo at 0xa800, 00:60:97:b0:c2:25, IRQ 10
8
Hi,
I had 4 hangs of my server in the last days. The first was with
2.2.18pre17, compiled with gcc 2.95.2. The next two were with
2.2.18pre23, compiled with gcc 2.95.2. Then I recompiled with
gcc 2.7.2.3 and had another hang.
Unfortunately there are no logs or oopses. The machine was just dead.
Arjan van de Ven wrote:
> [snip]
>
> > CONFIG_M686=y
>
> Ah ha!
>
> You have selected the Pentium II/III CPU type, which does NOT work on a K6.
> The compiler (and the kernel) will use the "new" Pentium II instructions
> (such as "cmov") which are not supported by the K6, leading to "illegal
Jeff Garzik wrote:
> Hans-Joachim Baader wrote:
> > test10, compiled with gcc 2.95.2, won't boot on one of my machine.
> > It stops after the "now booting the kernel" message. Yes, I have
> > configured Virtual Terminal and VGA text console.
>
> Does
Hi,
test10, compiled with gcc 2.95.2, won't boot on one of my machine.
It stops after the "now booting the kernel" message. Yes, I have
configured Virtual Terminal and VGA text console.
The configuration also contains Reiserfs (as a module) but that
shouldn't make a difference.
The system is a
Hi Greg,
> > my digital camera (Kodak DC 280) doesn't work with USB in 2.2.18pre17
> > (and previos kernels). It did work with 2.4.0-test9. Here's the log:
>
> What is the BIOS setting of MPS? If it's 1.4, please try 1.1
>
> Let me know if this helps out any.
With 1.1 it works great. Can you
Hi,
my digital camera (Kodak DC 280) doesn't work with USB in 2.2.18pre17
(and previos kernels). It did work with 2.4.0-test9. Here's the log:
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.237 $ time 21:44:51 Oct 20 2000
usb-uhci.c: High bandwidt
16 matches
Mail list logo