I have been following the development of the tulip driver with some
interest because my hardware requires it! I have described the
hardware setup I use before, but I can post it again if necessary.
I will only be able to test new versions/fixes until Tuesday morning
(UK) because then I lose my et
Michal Jaegermann wrote:
> I mentioned that before but this should be stated clearly. As far
> as I am concerned "Linux Tulip driver version 0.9.15-pre2 (May 16,
> 2001)", as used in 2.4.5 - and other kernels - is totally buggered.
> It comes up, and ethernet interfaces can be configured, but doe
> Could you post the output of
>
> #tulip-diag -mm -aa -f
>
> with the broken driver?
> Some code that's required for Linksys Tulip clones was moved
> from pnic specific part into the generic part, perhaps that
> causes problems.
Here is the output from the kernels I've tested to try to get the
Okay, so Jeff Garzik already knows about this - I told him last week -
but seeing as how the code has made it to a Linus pre-release without
a fix I thought I'd better post the breakage description to l-k!
The symptoms are:
In 2.4.5-pre4 (and 2.4.4-ac8 and above - note: I didn't try -ac7)
system
> I have a similar problem with my G450, booting into the framebuffer,
> then loading xdm and working in X, and then switching back to the
> console. I may have another detail to add in that when I switch back
> to the console from X, my monitor blanks and displays the warning
> that the frequen
> Does anyone know why fualhead is not working anymore?
> I just get a screen with rubbish on the second head.
> Also when kernel loads and and registers fb1 I lose signal
> on the second head.
...
>With 2.4.2 it was working just fine.
I have also noticed problems with the 2.4.3 release. I hav
Dear Petr,
I think I might have something to add to this discussion, but then
again you probably know this already!
On Tue Jan 30 2001 Petr Vandrovec wrote:
> > > > Installed a Matrox G450 on my linux system. Now it has
> > > > problems booting. The kernel is compiled with framebuffer
> > > > s
On Sun 24 Sep 2000 Derrik Pates wrote:
>- I am unable to connect to several sites, including
>cisco.netacad.net and www.hotmail.com. I always receive a "connection
>refused". It seems weird, but with 2.2.18pre10, I could connect, and
>with 2.4.0-test8, I can't.
I get similar behaviour on my box
John
[EMAIL PROTECTED]
Martin Diehl wrote:
> On Wed, 20 Sep 2000, J Brook wrote:
>
> > >>EIP; c01527b9<=
> > Trace; c015357b
>
> this is the quota issue for which I've posted a fix some days ago.
> It's (as of 2.4.0-t9p5) waiting on
Hi,
I ran into some trouble while compiling the pspell library that the
new version of Balsa requires - okay, so perhaps I was asking for
it :-) I ran the configure script fine, but a kernel oops occurred a
few lines into the "make" process. I gather that it might be
something to do with dod
10 matches
Mail list logo
