On 09. 04. 21 19:21, Christian Eggers wrote:
Hi Jiri,
I have two Fujitsu different FRAMs running with the stock at25 driver. I set
the page size equal to the device size (as FRAMs have no pages).
Are you able to run your FRAM with the unmodified driver?
I assume that getting the device
Hi Jacek,
comments below...
On 7.10.2015 15:32, Jacek Anaszewski wrote:
Hi Jiri,
Thanks for the patch. It's nice in general, but please see my
comments below.
On 10/07/2015 11:31 AM, Jiri Prchal wrote:
This patcht adds possibility to invert heartbeat blinking. The inverted LED is
more time
Hi Jacek,
comments below...
On 7.10.2015 15:32, Jacek Anaszewski wrote:
Hi Jiri,
Thanks for the patch. It's nice in general, but please see my
comments below.
On 10/07/2015 11:31 AM, Jiri Prchal wrote:
This patcht adds possibility to invert heartbeat blinking. The inverted LED is
more time
On 19.6.2015 15:21, Nicolas Ferre wrote:
Le 18/06/2015 14:09, Jiří Prchal a écrit :
On 18.6.2015 13:25, Cyrille Pitchen wrote:
Signed-off-by: Cyrille Pitchen
Tested-by: Jiří Prchal
It's already here.
Manually applied to 4.1-rc7 and it WORKS!
Good piece of new indeed.
Can you
On 19.6.2015 15:21, Nicolas Ferre wrote:
Le 18/06/2015 14:09, Jiří Prchal a écrit :
On 18.6.2015 13:25, Cyrille Pitchen wrote:
Signed-off-by: Cyrille Pitchen cyrille.pitc...@atmel.com
Tested-by: Jiří Prchal jiri.prc...@aksignal.cz
It's already here.
Manually applied to 4.1-rc7
On 18.6.2015 13:25, Cyrille Pitchen wrote:
Signed-off-by: Cyrille Pitchen
Tested-by: Jiří Prchal
Manually applied to 4.1-rc7 and it WORKS!
Great.
Jiri
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kerne
On 18.6.2015 13:25, Cyrille Pitchen wrote:
Signed-off-by: Cyrille Pitchen cyrille.pitc...@atmel.com
Tested-by: Jiří Prchal jiri.prc...@aksignal.cz
Manually applied to 4.1-rc7 and it WORKS!
Great.
Jiri
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body
Hi,
Dne 28.7.2014 v 14:21 Alexandre Belloni napsal(a):
Hi,
Thank you for that patch, a few questions/comments below.
On 28/07/2014 at 13:43:40 +0200, Jiri Prchal wrote :
This fix problem with PA14 set as periph A left from ROMBOOT and need it
to be set to gpio before spi bus communicate with
Hi,
Dne 28.7.2014 v 14:21 Alexandre Belloni napsal(a):
Hi,
Thank you for that patch, a few questions/comments below.
On 28/07/2014 at 13:43:40 +0200, Jiri Prchal wrote :
This fix problem with PA14 set as periph A left from ROMBOOT and need it
to be set to gpio before spi bus communicate with
Dne 25.7.2014 v 12:18 Boris BREZILLON napsal(a):
/ # devmem 0xf408
0xF0E04018
/ # devmem 0xf418
0xE0C04000
/ # devmem 0xf438
0x00C04000
/ # devmem 0xf43c
0x13FFD7FB
/ # devmem 0xf458
0x
/ # devmem 0xf468
0xFF223B4E
/ # devmem 0xf470
0x0F00
/ # devmem
Dne 25.7.2014 v 11:31 Boris BREZILLON napsal(a):
On Fri, 25 Jul 2014 11:13:51 +0200
Jiří Prchal wrote:
Every thing seems in place.
Could you enable CONFIG_DEBUG_PINCTRL and grep on "enable pin" ?
/ # dmesg | grep "enable pin"
[0.968750] pinctrl-at91 ahb:apb:pinc
Dne 25.7.2014 v 11:10 Boris BREZILLON napsal(a):
On Fri, 25 Jul 2014 10:59:03 +0200
Jiří Prchal wrote:
Dne 25.7.2014 v 10:54 Alexandre Belloni napsal(a):
On 25/07/2014 at 10:37:31 +0200, Jiří Prchal wrote :
Dne 25.7.2014 v 10:30 Alexandre Belloni napsal(a):
Hi,
On 25/07/2014 at 08
Dne 25.7.2014 v 11:01 Boris BREZILLON napsal(a):
On Fri, 25 Jul 2014 10:54:23 +0200
Jiří Prchal wrote:
Here it is:
cat /sys/kernel/debug/gpio
GPIOs 0-31, platform/f400.gpio, f400.gpio:
[in20] GPIOf400.gpio3: [gpio] set
[spi0.3] GPIOf400.gpio14: [gpio] set
[in19] GPIOf400
Dne 25.7.2014 v 10:54 Alexandre Belloni napsal(a):
On 25/07/2014 at 10:37:31 +0200, Jiří Prchal wrote :
Dne 25.7.2014 v 10:30 Alexandre Belloni napsal(a):
Hi,
On 25/07/2014 at 08:14:40 +0200, Jiří Prchal wrote :
I'm using custom board. My spi node:
spi0: spi
:
[nand_enable] GPIOfa00.gpio4: [gpio] set
[nand_rdy] GPIOfa00.gpio5: [gpio] set
[atmel_usba_udc] GPIOfa00.gpio21: [gpio] clear
Dne 25.7.2014 v 10:45 Boris BREZILLON napsal(a):
On Fri, 25 Jul 2014 10:27:13 +0200
Jiří Prchal wrote:
[...]
Could you also paste the content of /sys/kernel
Dne 25.7.2014 v 10:30 Alexandre Belloni napsal(a):
Hi,
On 25/07/2014 at 08:14:40 +0200, Jiří Prchal wrote :
I'm using custom board. My spi node:
spi0: spi@f000 {
You should override the pinctrl here as you are using gpios for the cs
(a):
On Fri, 25 Jul 2014 08:14:40 +0200
Jiří Prchal wrote:
Dne 24.7.2014 v 17:58 Boris BREZILLON napsal(a):
On Thu, 24 Jul 2014 17:06:43 +0200
Jiří Prchal wrote:
Hi,
Dne 24.7.2014 v 16:26 Boris BREZILLON napsal(a):
Hello Jiří,
First of all, please try to use git format-patch when submitting
Dne 25.7.2014 v 09:53 Boris BREZILLON napsal(a):
On Fri, 25 Jul 2014 08:14:40 +0200
Jiří Prchal wrote:
Dne 24.7.2014 v 17:58 Boris BREZILLON napsal(a):
On Thu, 24 Jul 2014 17:06:43 +0200
Jiří Prchal wrote:
Hi,
Dne 24.7.2014 v 16:26 Boris BREZILLON napsal(a):
Hello Jiří,
First
= device_create(_class, desc->chip->dev, MKDEV(0, 0),
Dne 24.7.2014 v 08:36 Guenter Roeck napsal(a):
On 07/23/2014 11:29 PM, Jiří Prchal wrote:
Hi,
just to append to this: is in plan some kind of exporting named GPIOs from
device tree to /sys/* or /dev/*? It would
be very useful n
Dne 24.7.2014 v 17:58 Boris BREZILLON napsal(a):
On Thu, 24 Jul 2014 17:06:43 +0200
Jiří Prchal wrote:
Hi,
Dne 24.7.2014 v 16:26 Boris BREZILLON napsal(a):
Hello Jiří,
First of all, please try to use git format-patch when submitting a
patch to any kernel mailing list.
Sorry
Dne 24.7.2014 v 17:58 Boris BREZILLON napsal(a):
On Thu, 24 Jul 2014 17:06:43 +0200
Jiří Prchal jiri.prc...@aksignal.cz wrote:
Hi,
Dne 24.7.2014 v 16:26 Boris BREZILLON napsal(a):
Hello Jiří,
First of all, please try to use git format-patch when submitting a
patch to any kernel mailing
24.7.2014 v 08:36 Guenter Roeck napsal(a):
On 07/23/2014 11:29 PM, Jiří Prchal wrote:
Hi,
just to append to this: is in plan some kind of exporting named GPIOs from
device tree to /sys/* or /dev/*? It would
be very useful not only for me. Because I thing what GPIO is used for what is
hardware design
Dne 25.7.2014 v 09:53 Boris BREZILLON napsal(a):
On Fri, 25 Jul 2014 08:14:40 +0200
Jiří Prchal jiri.prc...@aksignal.cz wrote:
Dne 24.7.2014 v 17:58 Boris BREZILLON napsal(a):
On Thu, 24 Jul 2014 17:06:43 +0200
Jiří Prchal jiri.prc...@aksignal.cz wrote:
Hi,
Dne 24.7.2014 v 16:26 Boris
(a):
On Fri, 25 Jul 2014 08:14:40 +0200
Jiří Prchal jiri.prc...@aksignal.cz wrote:
Dne 24.7.2014 v 17:58 Boris BREZILLON napsal(a):
On Thu, 24 Jul 2014 17:06:43 +0200
Jiří Prchal jiri.prc...@aksignal.cz wrote:
Hi,
Dne 24.7.2014 v 16:26 Boris BREZILLON napsal(a):
Hello Jiří,
First of all, please
Dne 25.7.2014 v 10:30 Alexandre Belloni napsal(a):
Hi,
On 25/07/2014 at 08:14:40 +0200, Jiří Prchal wrote :
I'm using custom board. My spi node:
spi0: spi@f000 {
You should override the pinctrl here as you are using gpios for the cs
:
[nand_enable] GPIOfa00.gpio4: [gpio] set
[nand_rdy] GPIOfa00.gpio5: [gpio] set
[atmel_usba_udc] GPIOfa00.gpio21: [gpio] clear
Dne 25.7.2014 v 10:45 Boris BREZILLON napsal(a):
On Fri, 25 Jul 2014 10:27:13 +0200
Jiří Prchal jiri.prc...@aksignal.cz wrote:
[...]
Could you also paste
Dne 25.7.2014 v 10:54 Alexandre Belloni napsal(a):
On 25/07/2014 at 10:37:31 +0200, Jiří Prchal wrote :
Dne 25.7.2014 v 10:30 Alexandre Belloni napsal(a):
Hi,
On 25/07/2014 at 08:14:40 +0200, Jiří Prchal wrote :
I'm using custom board. My spi node:
spi0: spi
Dne 25.7.2014 v 11:01 Boris BREZILLON napsal(a):
On Fri, 25 Jul 2014 10:54:23 +0200
Jiří Prchal jiri.prc...@aksignal.cz wrote:
Here it is:
cat /sys/kernel/debug/gpio
GPIOs 0-31, platform/f400.gpio, f400.gpio:
[in20] GPIOf400.gpio3: [gpio] set
[spi0.3] GPIOf400.gpio14: [gpio
Dne 25.7.2014 v 11:10 Boris BREZILLON napsal(a):
On Fri, 25 Jul 2014 10:59:03 +0200
Jiří Prchal jiri.prc...@aksignal.cz wrote:
Dne 25.7.2014 v 10:54 Alexandre Belloni napsal(a):
On 25/07/2014 at 10:37:31 +0200, Jiří Prchal wrote :
Dne 25.7.2014 v 10:30 Alexandre Belloni napsal(a):
Hi
Dne 25.7.2014 v 11:31 Boris BREZILLON napsal(a):
On Fri, 25 Jul 2014 11:13:51 +0200
Jiří Prchal jiri.prc...@aksignal.cz wrote:
Every thing seems in place.
Could you enable CONFIG_DEBUG_PINCTRL and grep on enable pin ?
/ # dmesg | grep enable pin
[0.968750] pinctrl-at91 ahb:apb:pinctrl
Dne 25.7.2014 v 12:18 Boris BREZILLON napsal(a):
/ # devmem 0xf408
0xF0E04018
/ # devmem 0xf418
0xE0C04000
/ # devmem 0xf438
0x00C04000
/ # devmem 0xf43c
0x13FFD7FB
/ # devmem 0xf458
0x
/ # devmem 0xf468
0xFF223B4E
/ # devmem 0xf470
0x0F00
/ # devmem
Hi,
Dne 24.7.2014 v 16:26 Boris BREZILLON napsal(a):
Hello Jiří,
First of all, please try to use git format-patch when submitting a
patch to any kernel mailing list.
Sorry for that.
On Thu, 24 Jul 2014 15:38:24 +0200
Jiří Prchal wrote:
After ROMBOOT tries boot from flash on SPI0 NPCS0
After ROMBOOT tries boot from flash on SPI0 NPCS0, this NPCS0 (PA14) remains
set to PERIPH_A.
Because of that, this pin is unusable to something else.
This patch sets it back to GPIO.
Signed-off-by: Jiri Prchal
--- a/linux-3.16-rc6/arch/arm/boot/dts/at91sam9x5.dtsi
+++
Hi,
just to append to this: is in plan some kind of exporting named GPIOs from device tree to /sys/* or /dev/*? It would be
very useful not only for me. Because I thing what GPIO is used for what is hardware design dependent same as for example
what SPI chips are used. And SPI chips are in DT.
Hi,
just to append to this: is in plan some kind of exporting named GPIOs from device tree to /sys/* or /dev/*? It would be
very useful not only for me. Because I thing what GPIO is used for what is hardware design dependent same as for example
what SPI chips are used. And SPI chips are in DT.
After ROMBOOT tries boot from flash on SPI0 NPCS0, this NPCS0 (PA14) remains
set to PERIPH_A.
Because of that, this pin is unusable to something else.
This patch sets it back to GPIO.
Signed-off-by: Jiri Prchal jiri.prc...@aksignal.cz
--- a/linux-3.16-rc6/arch/arm/boot/dts/at91sam9x5.dtsi
+++
Hi,
Dne 24.7.2014 v 16:26 Boris BREZILLON napsal(a):
Hello Jiří,
First of all, please try to use git format-patch when submitting a
patch to any kernel mailing list.
Sorry for that.
On Thu, 24 Jul 2014 15:38:24 +0200
Jiří Prchal jiri.prc...@aksignal.cz wrote:
After ROMBOOT tries boot from
Thanks, it works now.
Dne 11.7.2014 12:47, Alexandre Belloni napsal(a):
On 11/07/2014 at 18:22:55 +0800, Bo Shen wrote :
Add clocks for usb device, or else switch to CCF, the gadget
won't work.
Reported-by: Jiří Prchal
Signed-off-by: Bo Shen
Acked-by: Alexandre Belloni
Tested-by: Jiri
Thanks, it works now.
Dne 11.7.2014 12:47, Alexandre Belloni napsal(a):
On 11/07/2014 at 18:22:55 +0800, Bo Shen wrote :
Add clocks for usb device, or else switch to CCF, the gadget
won't work.
Reported-by: Jiří Prchal jiri.prc...@aksignal.cz
Signed-off-by: Bo Shen voice.s...@atmel.com
Acked
Hi,
the slow crystal is not on the module "ge863-pro3", but it's usually on application board. So I think this clock should
be in board dts.
Dne 7.7.2014 22:23, Alexandre Belloni napsal(a):
Define Telit GE863-PRO3, AK signal CDU and Telit EVK-PRO3 main and slow
crystals frequencies.
Hi,
the slow crystal is not on the module ge863-pro3, but it's usually on application board. So I think this clock should
be in board dts.
Dne 7.7.2014 22:23, Alexandre Belloni napsal(a):
Define Telit GE863-PRO3, AK signal CDU and Telit EVK-PRO3 main and slow
crystals frequencies.
41 matches
Mail list logo