On Wed, May 01, 2019 at 12:56:07PM -0700, Atish Patra wrote:
> Currently, last stage boot loaders such as U-Boot can accept only
> uImage which is an unnecessary additional step in automating boot flows.
>
> Add a PE/COFF compliant image header that boot loaders can parse and
> directly load kern
On Mon, May 06, 2019 at 10:06:39PM +0200, Heinrich Schuchardt wrote:
> On 5/6/19 8:11 PM, Atish Patra wrote:
> > This patch adds booti support for RISC-V Linux kernel. The existing
> > bootm method will also continue to work as it is.
[...]
> > + "boot arm64/riscv Linux Image image from memory",
On Mon, Apr 29, 2019 at 10:42:40PM -0700, Atish Patra wrote:
> On 4/29/19 4:40 PM, Palmer Dabbelt wrote:
> > On Tue, 23 Apr 2019 16:25:06 PDT (-0700), atish.pa...@wdc.com wrote:
> > > Currently, last stage boot loaders such as U-Boot can accept only
> > > uImage which is an unnecessary additional s
On Sat, Aug 18, 2018 at 06:37:59AM -0700, Guenter Roeck wrote:
> On Fri, Aug 17, 2018 at 01:28:11PM -0700, Palmer Dabbelt wrote:
> [ ... ]
> >
> > This tag boots a Fedora root filesystem on QEMU's master branch for me,
> > and before this morning's rebase (from 4.18-rc8 to 4.18) it booted on
> > t
The Olimex A20-SOM-EVB is an evaluation board for the Olimex
A20-SOM system-on-module. The baseboard provides a full-size SD
socket (connected to mmc3) in addition to the micro-SD socket on
the SOM itself (which is connected to mmc0).
Enable the mmc3 controller in the dts.
Signed-off-by: Karsten
full-size SD card socket on the baseboard.
While adding the LRADC-keys support, I have stumbled over
a typo in the bindings documentation. Patch 3 fixes that.
Regards,
Karsten
Karsten Merker (3):
ARM: dts: sun7i: Olimex A20-SOM-EVB: Add LRADC keys
ARM: dts: sun7i: Olimex A20-SOM-EVB: Enable
ow-resolution ADC via a
resistor network.
This patch adds appropriate button definitions to the board
dts. The voltages assigned to the keys are specified in the
board schematics published by the manufacturer.
Signed-off-by: Karsten Merker
---
arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts |
Trivial typo fix ("mut" -> "must") in the sunxi LRADC-keys binding
documentation.
Signed-off-by: Karsten Merker
---
Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/devicetr
separate "rotated_screen" flag
is not necessary anymore. This patch replaces it by setting
the inverted_x and inverted_y flags instead.
Signed-off-by: Karsten Merker
Reviewed-by: Irina Tirdea
Tested-by: Bastien Nocera
Acked-by: Bastien Nocera
---
drivers/input/touchscreen/goodi
necessary on tablets which have a display in portrait
format while the touchscreen is in landscape format, such as e.g.
the MSI Primo 81.
Signed-off-by: Karsten Merker
Tested-by: Bastien Nocera
Tested-by: Irina Tirdea (with ACPI DSD properties)
Tested-by: Aleksei Mamlin (with device-tree
properties)
Tested-by: Aleksei Mamlin (with device-tree
properties)
v4: * Rebase against v11 of Irina Tirdea's "Goodix touchscreen
enhancements" series (no functional changes).
Karsten Merker (3):
Input: goodix - add axis swapping and axis inversion support
I
.
Signed-off-by: Karsten Merker
Reviewed-by: Irina Tirdea
---
Documentation/devicetree/bindings/input/touchscreen/goodix.txt | 5 +
1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
b/Documentation/devicetree/bindings/input
The MSI Primo81 has a display in portrait mode but a touchscreen
in landscape mode. To have both of them use the same coordinate
system, the touchscreen-swapped-x-y property has to be set
for the touchscreen.
Signed-off-by: Karsten Merker
---
arch/arm/boot/dts/sun6i-a31s-primo81.dts | 1 +
1
separate "rotated_screen" flag
is not necessary anymore. This patch replaces it by setting
the inverted_x and inverted_y flags instead.
Signed-off-by: Karsten Merker
Reviewed-by: Irina Tirdea
Tested-by: Bastien Nocera
Acked-by: Bastien Nocera
---
drivers/input/touchscreen/goodi
.
Signed-off-by: Karsten Merker
Reviewed-by: Irina Tirdea
---
Documentation/devicetree/bindings/input/touchscreen/goodix.txt | 6 ++
1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
b/Documentation/devicetree/bindings/input
necessary on tablets which have a display in portrait
format while the touchscreen is in landscape format, such as e.g.
the MSI Primo 81.
Signed-off-by: Karsten Merker
Tested-by: Bastien Nocera
---
drivers/input/touchscreen/goodix.c | 25 +
1 file changed, 25 insertions
x_configure_dev to make them work properly in all
configurations (with and without gpio declarations).
- Use the new unified device properties API (device_property_*)
instead of the classic DT API (of_property_*). This
provides support for ACPI 5.1 DSD properties as well a
* Fix a typo in the commit message.
* Add an update for the goodix dt bindings documentation
(patch No. 3).
Karsten Merker (3):
Input: goodix - add dt axis swapping and axis inversion support
Input: goodix - use "inverted_[xy]" flags instead of "rotated_screen&qu
tablets which have a display in portrait
format while the touchscreen is in landscape format, such as e.g.
the MSI Primo 81.
Signed-off-by: Karsten Merker
---
drivers/input/touchscreen/goodix.c | 27 +++
1 file changed, 27 insertions(+)
diff --git a/drivers/input/touchscreen
.
Signed-off-by: Karsten Merker
---
Documentation/devicetree/bindings/input/touchscreen/goodix.txt | 6 ++
1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
index
separate "rotated_screen" flag
is not necessary any more. This patch replaces it by setting
the inverted_x and inverted_y flags instead.
Signed-off-by: Karsten Merker
---
drivers/input/touchscreen/goodix.c | 12
1 file changed, 4 insertions(+), 8 deletions(-)
diff --git
opriate hardware to do a real-world
test of the "rotated_screen" code path, so I would apprechiate very
much if somebody with appropriate hardware could give it a try.
This is my first go at modifying an input driver; any kind of
feedback and hints is welcome.
Regards,
Karsten
Kars
tablets which have a display in portrait
format while the touchscreen is in landscape format, such as e.g.
the MSI Primo 81.
Signed-off-by: Karsten Merker
---
drivers/input/touchscreen/goodix.c | 27 +++
1 file changed, 27 insertions(+)
diff --git a/drivers/input/touchscreen
separate "rotated_screen" flag
is not necessary any more. This patch replaces it by setting
the inverted-x and inverted-x flags instead.
Signed-off-by: Karsten Merker
---
drivers/input/touchscreen/goodix.c | 12
1 file changed, 4 insertions(+), 8 deletions(-)
diff --git
Native Debian kernel packages include any dtbs that were generated
during the kernel build process in /usr/lib/${packagename}.
Do the same for Debian packages built by scripts/package/builddeb
(executed by the "deb-pkg" target).
Signed-off-by: Karsten Merker
---
scripts/package/bu
25 matches
Mail list logo