Hi,
> > Hm, OK, then never mind. :) I don't have an opl3sa2 here to test
> > how well the current driver works.
> I have the feeling that there is going something wrong with the parameters.
> I modified the opl3sa2 driver and manually set the hw_config->io_base
> variable to 0x538 and now THIS pa
Hi,
> > Control I/O: 0x538
> > MPU I/O: 0x330
> Hm, OK, then never mind. :) I don't have an opl3sa2 here to test
> how well the current driver works.
I have the feeling that there is going something wrong with the parameters. I
modified the opl3sa2 driver and manually set the hw_config->io_base
Hi,
> > modprobe opl3sa2 io=0x538 mss_io=0x530 mpu_io=0x330 irq=5 dma=1 dma2=0
> > isapnp=0
> It would be what you put in the io= parameter. 0x538 does *not* look
> right.
These are the sound-settings in the BIOS:
WSS I/O: 0x530
SBPro I/O: 0x220
Synth I/O: 0x388
IRQ: 5
WSS (Play) DMA: 1
WSS (Re
Hi,
> > 2001-03-29 10:02:50.054774500 {kern|info} kernel: ad1848/cs4248 codec
> > driver Copyright (C) by Hannu Savolainen 1993-1996
> > 2001-03-29 10:02:50.070692500 {kern|notice} kernel: opl3sa2: No cards
> > found 2001-03-29 10:02:50.070703500 {kern|notice} kernel: opl3sa2: 0 PnP
> > card(s) f
Hi,
I have switched from 2.2.17 to 2.4.2 and now the sound is no longer working
on my Toshiba Tecra 8000 Notebook. In 2.2.17 I used the following modules:
mpu401
ad1848
opl3sa2 io=0x538 mss_io=0x530 mpu_io=0x330 irq=5 dma=1 dma2=0
opl3 io=0x388
This was working perfectly. I was able to control
5 matches
Mail list logo
