Hallo,
sorry if this is a silly question...
as far as I understood my smp-board seem not well designed - so I get APIC
error messages nearly every 1-3 seconds. These mmessages do not help me
because -so I was told - it is not possible to fix the problem.
Is it possible to eliminate these error
Hallo,
sorry if this is a silly question...
as far as I understood my smp-board seem not well designed - so I get APIC
error messages nearly every 1-3 seconds. These mmessages do not help me
because -so I was told - it is not possible to fix the problem.
Is it possible to eliminate these error
Allan,
a make modules on 2.4.0-prerelease-ac6 exits with error:
make[2]: Entering directory `/usr/src/linux-2.4.0ac6/drivers/char'
gcc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2
-fomit-frame-pointer -fno-strict-aliasing -pipe -mpreferred-stack-boundary=2
-march=i586
Allan,
my graphic card is a matrox 1- video card is a haupauge/model618pci , no AGP
or DRM. The output of ver_linux + lsmod below. There has to be significant
change from test13pre7 to prerelease ff. There is an immediate standstill,
nothing in /var/log/messages or /var/log/warn.
kind
Hallo,
I'm using 2.4.0prerelease-ac4. As far as I can see most things work fine
besides the following:
1. after make modules_install I get:
depmod: *** Unresolved symbols in
/lib/modules/2.4.0-test12/kernel/drivers/block/fusion/mptlan.o
depmod: unregister_fcdev
depmod:
Hallo,
I'm using 2.4.0prerelease-ac4. As far as I can see most things work fine
besides the following:
1. after make modules_install I get:
depmod: *** Unresolved symbols in
/lib/modules/2.4.0-test12/kernel/drivers/block/fusion/mptlan.o
depmod: unregister_fcdev
depmod:
Allan,
my graphic card is a matrox 1- video card is a haupauge/model618pci , no AGP
or DRM. The output of ver_linux + lsmod below. There has to be significant
change from test13pre7 to prerelease ff. There is an immediate standstill,
nothing in /var/log/messages or /var/log/warn.
kind
Allan,
a make modules on 2.4.0-prerelease-ac6 exits with error:
make[2]: Entering directory `/usr/src/linux-2.4.0ac6/drivers/char'
gcc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2
-fomit-frame-pointer -fno-strict-aliasing -pipe -mpreferred-stack-boundary=2
-march=i586
Hallo,
I've tested 2.4.0prerelease pure - ac1-ac2-ac3-ac4-ac5 and my system crashed
whenever I left X.
Having switched back to 2.4.0-test13pre7 all is fine.
I'm no developer, so if you need more information, give me some hints.
kind regards
Norbert
-
To unsubscribe from this list: send the
Hallo,
I've tested 2.4.0prerelease pure - ac1-ac2-ac3-ac4-ac5 and my system crashed
whenever I left X.
Having switched back to 2.4.0-test13pre7 all is fine.
I'm no developer, so if you need more information, give me some hints.
kind regards
Norbert
-
To unsubscribe from this list: send the
.
kind regards
Norbert
On Monday 18 December 2000 08:35, Peter Samuelson wrote:
> [Norbert Breun]
>
> > The problem is, there should be a directory "media" under
> > /lib/modules/2.4.0-test12.old/kernel/drivers/ and this is missing in
> > test13pre2 and test13pr
.
kind regards
Norbert
On Monday 18 December 2000 08:35, Peter Samuelson wrote:
[Norbert Breun]
The problem is, there should be a directory "media" under
/lib/modules/2.4.0-test12.old/kernel/drivers/ and this is missing in
test13pre2 and test13pre3. The modules are not built.
Peter,
you may be right there is no module "video.o". The problem is, there should
be a directory "media" under /lib/modules/2.4.0-test12.old/kernel/drivers/
and this is missing in test13pre2 and test13pre3. The modules are not built.
kind regards
Norbert
On Monday 18 December 2000 07:11,
/video or
~radio.
BTW: this time I used 2.4.0-test13pre3 + your minipatch ...
kind regards
Norbert
On Sunday 17 December 2000 09:32, Keith Owens wrote:
> On Sun, 17 Dec 2000 09:22:04 +0100,
>
> Norbert Breun <[EMAIL PROTECTED]> wrote:
> >having applied your patch bel
Keith,
having applied your patch below + modutils2.3.23-1 + kernel2.4.0-test13pre2
all seems to run perfect.
But when starting kwintv /dev/video is not found. /dev/video is a symling on
/dev/video0 and with kernel kernel2.4.0-test12 there is no problem at all.
>can't open /dev/video: Kein
Keith,
having applied your patch below + modutils2.3.23-1 + kernel2.4.0-test13pre2
all seems to run perfect.
But when starting kwintv /dev/video is not found. /dev/video is a symling on
/dev/video0 and with kernel kernel2.4.0-test12 there is no problem at all.
can't open /dev/video: Kein
/video or
~radio.
BTW: this time I used 2.4.0-test13pre3 + your minipatch ...
kind regards
Norbert
On Sunday 17 December 2000 09:32, Keith Owens wrote:
On Sun, 17 Dec 2000 09:22:04 +0100,
Norbert Breun [EMAIL PROTECTED] wrote:
having applied your patch below + modutils2.3.23-1 +
kernel2.4.0
Peter,
you may be right there is no module "video.o". The problem is, there should
be a directory "media" under /lib/modules/2.4.0-test12.old/kernel/drivers/
and this is missing in test13pre2 and test13pre3. The modules are not built.
kind regards
Norbert
On Monday 18 December 2000 07:11,
Hallo,
compiling a fresh patched 2.4.0.13pre1 and make modules shows me following
error:
make[2]: *** No rule to make target `irlan/irlan.o', needed by `modules'.
Stop.make[2]: Leaving directory `/usr/src/linux-2.4.0.13pre1/net/irda'
make[1]: *** [_modsubdir_irda] Error 2
make[1]: Leaving
Hallo,
compiling a fresh patched 2.4.0.13pre1 and make modules shows me following
error:
make[2]: *** No rule to make target `irlan/irlan.o', needed by `modules'.
Stop.make[2]: Leaving directory `/usr/src/linux-2.4.0.13pre1/net/irda'
make[1]: *** [_modsubdir_irda] Error 2
make[1]: Leaving
Hallo,
tried to compile test12-pre8 and make modules exits with:
>make[2]: Entering directory `/usr/src/linux-2.4.0.12pre8/fs/smbfs'
gcc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2
-fomit-frame-pointer -fno-strict-aliasing -pipe -mpreferred-stack-boundary=2
Hallo,
tried to compile test12-pre8 and make modules exits with:
make[2]: Entering directory `/usr/src/linux-2.4.0.12pre8/fs/smbfs'
gcc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2
-fomit-frame-pointer -fno-strict-aliasing -pipe -mpreferred-stack-boundary=2
-march=i586
Mark,
after applying that patch I cut out of an email from Linus the bug continues
to appear but the output of ksymoops looks a little bit shorter.
>I've read Linus' posting and patched my kernel. It's compiling now.
>Nevertheless I attached the output of ksymoops - maybe it'll be still
Mark,
after applying that patch I cut out of an email from Linus the bug continues
to appear but the output of ksymoops looks a little bit shorter.
I've read Linus' posting and patched my kernel. It's compiling now.
Nevertheless I attached the output of ksymoops - maybe it'll be still
Marc,
if more / other information is needed let me know.
I'll try to go through the points as described in
/usr/src/linux/REPORTING-BUGS:
[1.] Bug reported on system startup.
[2.] no obvious problem detected besides this message
besides apic errors on both CPUs.
[3.] kernel BUG at
Hallo,
at startup of 2.4.0-test12pre7 I receive a bug-message as part of the
following boot.msg. I hope this will be helpfull. If you need more info, let
me know.
kind regards
Norbert
snip --
kernel BUG at buffer.c:827!
Hallo,
at startup of 2.4.0-test12pre7 I receive a bug-message as part of the
following boot.msg. I hope this will be helpfull. If you need more info, let
me know.
kind regards
Norbert
snip --
kernel BUG at buffer.c:827!
Marc,
if more / other information is needed let me know.
I'll try to go through the points as described in
/usr/src/linux/REPORTING-BUGS:
[1.] Bug reported on system startup.
[2.] no obvious problem detected besides this message
besides apic errors on both CPUs.
[3.] kernel BUG at
Hallo Mark,
there is one thing, that is some kind of curious:
using 2.4.0-test12pre5 I've many apic errors with CPU1 a n d CPU0:
Dec 7 06:52:04 nmb kernel: APIC error on CPU1: 04(00)
Dec 7 06:52:04 nmb kernel: APIC error on CPU0: 02(00)
Dec 7 06:52:04 nmb kernel: APIC error on CPU0: 04(00)
Hallo Mark,
there is one thing, that is some kind of curious:
using 2.4.0-test12pre5 I've many apic errors with CPU1 a n d CPU0:
Dec 7 06:52:04 nmb kernel: APIC error on CPU1: 04(00)
Dec 7 06:52:04 nmb kernel: APIC error on CPU0: 02(00)
Dec 7 06:52:04 nmb kernel: APIC error on CPU0: 04(00)
Hallo,
following errors come when running 2.4.0-test12-pre3 on my Gigabyte GA-586DX
SMP_BOARD. Theses errors also appear with 2.4.0-test11 ind prior.
Running with 2.2.16 / 2.2.17 no such errors appear:
Nov 30 11:33:46 nmb kernel: APIC error on CPU0: 08(00)
Nov 30 11:34:09 nmb kernel: APIC
Hallo,
following errors come when running 2.4.0-test12-pre3 on my Gigabyte GA-586DX
SMP_BOARD. Theses errors also appear with 2.4.0-test11 ind prior.
Running with 2.2.16 / 2.2.17 no such errors appear:
Nov 30 11:33:46 nmb kernel: APIC error on CPU0: 08(00)
Nov 30 11:34:09 nmb kernel: APIC
32 matches
Mail list logo
