Am 24.01.2013 03:24, schrieb Greg KH:
> On Thu, Jan 24, 2013 at 03:06:29AM +0100, Sven Köhler wrote:
>> Hi,
>>
>> I had to revert this, because it resulted in
>>
>> LD init/built-in.o
>> arch/x86/built-in.o: In function `setup_arch':
&g
no incremental patch in
http://www.kernel.org/pub/linux/kernel/v2.6/incr/. Is this due to some
delay, or was is just not uploaded?
Would be really nice to have indeed.
signature.asc
Description: OpenPGP digital signature
Yes the gdth driver passed an open hart surgery in kernel 2.6.24. The bad thing
about it is that all three of the Coders that did that did not have any HW to
work
on. One of them is me. We did cry for tester for a long time but no one came
forward.
All i'd like to ask is WHY!?
WHY such a big o
Hi,
so i have upgraded a system to kernel 2.6.24. After that, it failed to
boot with the usual message telling, that the rootfs on device /dev/sda1
cannot be mounted (a raid1 run by the controller below).
With 2.6.23.12, everything is working fine.
# lspci -v:
03:01.0 RAID bus controller:
>> currently, i'm using the ondemand governor. My CPU supports the
>> frequencies 800, 1800 and 2000 MHz (AMD Athlon64 Desktop with
>> Cool&Quiet). The simple bash commands
>>
>
> In my case, I have a Pentium M 1.8ghz 400 FSB. In powersave, it goes to
> 1.19ghz, in conservative, it goes to 1.20GH
Hi,
currently, i'm using the ondemand governor. My CPU supports the
frequencies 800, 1800 and 2000 MHz (AMD Athlon64 Desktop with
Cool&Quiet). The simple bash commands
while true
do
true
done
cause 100% CPU usage, and the CPU immediatly switched from 800 to 2000MHz.
Using the conserva
The manufacturer of the easyRAID R5A sent be a firmware-update, that
fixes the problem.
So forget about this.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
i have many problems with kernel 2.6.10 since it won't run stable with
an IDE-device. It's an internal IDE-RAID subsystem. The DMA is
frequently disabled, and even writes/reads fail and the kernel reports
I/O-Errors for many sectors. The RAID-device doesn't report any errors
it it's own event-log.
Hi,
i have many problems with kernel 2.6.10 since it won't run stable with
an IDE-device. It's an internal IDE-RAID subsystem. The DMA is
frequently disabled, and even writes/reads fail and the kernel reports
I/O-Errors for many sectors. The RAID-device doesn't report any errors
it it's own eve
9 matches
Mail list logo
