On Fri, Jan 25, 2013 at 16:20:13, Nori, Sekhar wrote:
> On 1/24/2013 5:05 PM, Vishwanathrao Badarkhe, Manish wrote:
> > Add I2C0 device tree node information to da850-evm.
> > Also, add I2C0 pin muxing information in da850-evm.
> >
> > Signed-off-by: Vis
On Sat, Jan 26, 2013 at 10:42:08, Mark Brown wrote:
> On Fri, Jan 25, 2013 at 06:29:49AM +0000, Vishwanathrao Badarkhe, Manish
> wrote:
> > On Thu, Jan 24, 2013 at 17:30:51, Mark Brown wrote:
>
> > I too doubt that whether it should be in architecture specific f
On Sat, Jan 26, 2013 at 10:42:08, Mark Brown wrote:
On Fri, Jan 25, 2013 at 06:29:49AM +, Vishwanathrao Badarkhe, Manish
wrote:
On Thu, Jan 24, 2013 at 17:30:51, Mark Brown wrote:
I too doubt that whether it should be in architecture specific folder,
My code is in reference
On Fri, Jan 25, 2013 at 16:20:13, Nori, Sekhar wrote:
On 1/24/2013 5:05 PM, Vishwanathrao Badarkhe, Manish wrote:
Add I2C0 device tree node information to da850-evm.
Also, add I2C0 pin muxing information in da850-evm.
Signed-off-by: Vishwanathrao Badarkhe, Manish manish...@ti.com
Hi Mark,
On Thu, Jan 24, 2013 at 17:30:51, Mark Brown wrote:
> On Thu, Jan 24, 2013 at 04:25:19PM +0530, Vishwanathrao Badarkhe, Manish
> wrote:
>
> > ---
> > arch/arm/boot/dts/tps6507x.dtsi | 47
> > +++
>
> Why are yo
Add I2C0 device tree node information to da850-evm.
Also, add I2C0 pin muxing information in da850-evm.
Signed-off-by: Vishwanathrao Badarkhe, Manish
---
Depends on patch
http://comments.gmane.org/gmane.linux.davinci/25993
arch/arm/boot/dts/da850-evm.dts | 15 +++
arch/arm/boot
Add device tree based initialization support for TI's
tps6507x mfd device.
Signed-off-by: Vishwanathrao Badarkhe, Manish
---
drivers/mfd/tps6507x.c |9 +
1 files changed, 9 insertions(+), 0 deletions(-)
diff --git a/drivers/mfd/tps6507x.c b/drivers/mfd/tps6507x.c
index 409afa2
maximum output voltage the
regulator is capable to provide.
for e.g. regulator name for dcdc1 is "VDCDC1_3.3V".
Also, add tps6507x PMIC I2C slave device under I2C0 node.
Tested on da850-evm.
Signed-off-by: Vishwanathrao Badarkhe, Manish
---
arch/arm/boot/dts/da850-evm.
Add device tree based initialization support for
TI's tps6507x regulators.
Add device tree binding document for TI's tps6507x
using datasheet:
http://www.ti.com/lit/ds/symlink/tps65070.pdf
Signed-off-by: Vishwanathrao Badarkhe, Manish
---
Documentation/devicetree/bindings/mfd/tps6507x.txt
VDCDC2_3.3V enabled 330
/sys/class/regulator/regulator.3 VDCDC3_1.2V enabled 120
/sys/class/regulator/regulator.4 LDO1_1.8V enabled 180
/sys/class/regulator/regulator.5 LDO2_1.2V enabled 120
Vishwanathrao Badarkhe, Manish (6):
ARM: davinci: da850: add OF_DEV_AUXDATA entry for I2C0
Add OF_DEV_AUXDATA for I2C0 controller driver in da850 board
dt file to use I2C0 clock.
Signed-off-by: Vishwanathrao Badarkhe, Manish
---
arch/arm/mach-davinci/da8xx-dt.c |8 +++-
1 files changed, 7 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm
is created using datasheet
http://www.ti.com/lit/ds/symlink/tps65070.pdf
Tested on da850-evm.
Signed-off-by: Vishwanathrao Badarkhe, Manish
---
arch/arm/boot/dts/tps6507x.dtsi | 47 +++
1 files changed, 47 insertions(+), 0 deletions(-)
create mode 100644
Add I2C0 device tree node information to da850-evm.
Also, add I2C0 pin muxing information in da850-evm.
Signed-off-by: Vishwanathrao Badarkhe, Manish manish...@ti.com
---
Depends on patch
http://comments.gmane.org/gmane.linux.davinci/25993
arch/arm/boot/dts/da850-evm.dts | 15
Hi Mark,
On Thu, Jan 24, 2013 at 17:30:51, Mark Brown wrote:
On Thu, Jan 24, 2013 at 04:25:19PM +0530, Vishwanathrao Badarkhe, Manish
wrote:
---
arch/arm/boot/dts/tps6507x.dtsi | 47
+++
Why are you putting this in arch/arm?
I too doubt
Add OF_DEV_AUXDATA for I2C0 controller driver in da850 board
dt file to use I2C0 clock.
Signed-off-by: Vishwanathrao Badarkhe, Manish manish...@ti.com
---
arch/arm/mach-davinci/da8xx-dt.c |8 +++-
1 files changed, 7 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-davinci/da8xx
is created using datasheet
http://www.ti.com/lit/ds/symlink/tps65070.pdf
Tested on da850-evm.
Signed-off-by: Vishwanathrao Badarkhe, Manish manish...@ti.com
---
arch/arm/boot/dts/tps6507x.dtsi | 47 +++
1 files changed, 47 insertions(+), 0 deletions
Add device tree based initialization support for
TI's tps6507x regulators.
Add device tree binding document for TI's tps6507x
using datasheet:
http://www.ti.com/lit/ds/symlink/tps65070.pdf
Signed-off-by: Vishwanathrao Badarkhe, Manish manish...@ti.com
---
Documentation/devicetree/bindings/mfd
VDCDC2_3.3V enabled 330
/sys/class/regulator/regulator.3 VDCDC3_1.2V enabled 120
/sys/class/regulator/regulator.4 LDO1_1.8V enabled 180
/sys/class/regulator/regulator.5 LDO2_1.2V enabled 120
Vishwanathrao Badarkhe, Manish (6):
ARM: davinci: da850: add OF_DEV_AUXDATA entry for I2C0
maximum output voltage the
regulator is capable to provide.
for e.g. regulator name for dcdc1 is VDCDC1_3.3V.
Also, add tps6507x PMIC I2C slave device under I2C0 node.
Tested on da850-evm.
Signed-off-by: Vishwanathrao Badarkhe, Manish manish...@ti.com
---
arch/arm/boot/dts/da850-evm.dts | 64
Add device tree based initialization support for TI's
tps6507x mfd device.
Signed-off-by: Vishwanathrao Badarkhe, Manish manish...@ti.com
---
drivers/mfd/tps6507x.c |9 +
1 files changed, 9 insertions(+), 0 deletions(-)
diff --git a/drivers/mfd/tps6507x.c b/drivers/mfd/tps6507x.c
101 - 120 of 120 matches
Mail list logo