All,
[EMAIL PROTECTED] said:
>> Thanks for that info! I'm starting to suspect media too. I'll try to
>> wreste that firmware upgrade into it. Which firmware version are you
>> using?
>
> I've got version R1.07 of the firmware.
Through a very painful procedure I got w98 installed and bumped my
f
> > > It's an AOPEN DUW1608/ARR
> I just thought I should chime in because I have the same burner running
> under a 2.6.11 kernel, and using ide-cd. The drive burns just fine, linux
> support was good, but I did run into two problems:
> 1) I had to shop around till I found a brand of DVD-R (I have
> On Thu, Apr 14, 2005 at 03:35:22PM +0200, [EMAIL PROTECTED] wrote:
> Well there is a cdwrite mailing list hosted on lists.debian.org which is
> a great place to figure out what weird errors are and such, and the
> authors of the programs used for writing discs are on thoses lists too,
> so you ma
>
> What brand/model drive is this?
>
It's an AOPEN DUW1608/ARR
http://usa.aopen.com/products/dvd+rw/DUW1608ARR.htm
Should I consider changing it? (I got an 'if this doesn't run on Linux
I can trade it in' warranty at the shop)
> It is possible to get very weird errors if you have unsupporte
> On Wed, Apr 13, 2005 at 09:07:56PM +0200, [EMAIL PROTECTED] wrote:
> growisofs -Z /dev/hdc -J -R /path/to/dir/with/less/than/4.5GB/of/files
>
> That should do it. To do scsi I suspect it would be /dev/sg0 or
> /dev/scd0. I haven't actually tried burning in scsi emulation mode with
> these driv
> On Wed, Apr 13, 2005 at 08:14:21PM +0200, [EMAIL PROTECTED] wrote:
>
> Well it does look odd that it loads with one and not the other. Which
> kernel is this with?
>
It's with 2.6.11.7
> Does writing CDs and DVDs actually work using ide-scsi? Does it work
> using ide-cd?
Dunno yet. What's
All,
I've just gotten myself a new DVD burner which triggers some
interesting events in the kernel. From the log:
hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdc:
Since installing 2.6.10 kswapd has decided to loop wildly on two
occations. Both occations happened after starting a big compiles.
Checking vmstat, I noticed a steady stream of io/bi figures ranging
between 2-5K (which is about what I can get out of this box during
normal operation), but no swap i
8 matches
Mail list logo
