From: Hongbo Zhang hongbo.zh...@freescale.com
This patch adds support to 8-channel DMA engine, thus the driver works for both
the new 8-channel and the legacy 4-channel DMA engines.
Signed-off-by: Hongbo Zhang hongbo.zh...@freescale.com
---
drivers/dma/Kconfig |9 +
From: Hongbo Zhang hongbo.zh...@freescale.com
This patch updates the discription of each type of DMA controller and its
channels, it is preparation for adding another new DMA controller binding, it
also fixes some defects of indent for text alignment at the same time.
Signed-off-by: Hongbo Zhang
From: Hongbo Zhang hongbo.zh...@freescale.com
Hi DMA and DT maintainers, please have a look at these V10 patches.
Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this patch set
adds support this DMA engine.
V9-V10 changes:
- update binding description text, mainly about the reg
From: Hongbo Zhang hongbo.zh...@freescale.com
Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this patch adds
the device tree nodes for them.
Signed-off-by: Hongbo Zhang hongbo.zh...@freescale.com
---
.../devicetree/bindings/powerpc/fsl/dma.txt| 69
From: Hongbo Zhang
Some devices can work as wakeup sources, they should be powerred on during
system deep sleep, this patch adds interface for configuring devices power
supply status during deep sleep.
Signed-off-by: Hongbo Zhang
---
arch/powerpc/boot/dts/fsl/qoriq-power.dtsi | 73
From: Hongbo Zhang hongbo.zh...@freescale.com
Some devices can work as wakeup sources, they should be powerred on during
system deep sleep, this patch adds interface for configuring devices power
supply status during deep sleep.
Signed-off-by: Hongbo Zhang hongbo.zh...@freescale.com
---
From: Hongbo Zhang
Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this patch adds
the device tree nodes for them.
Signed-off-by: Hongbo Zhang
---
.../devicetree/bindings/powerpc/fsl/dma.txt| 67
arch/powerpc/boot/dts/fsl/b4si-post.dtsi |
From: Hongbo Zhang
Hi DMA and DT maintainers, please have a look at these V9 patches.
Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this patch set
adds support this DMA engine.
V8->V9 changes:
- add "Acked-by: Mark Rutland " into patch [1/3]
- update reg entry <0x100300 0x4
From: Hongbo Zhang
This patch adds support to 8-channel DMA engine, thus the driver works for both
the new 8-channel and the legacy 4-channel DMA engines.
Signed-off-by: Hongbo Zhang
---
drivers/dma/Kconfig |9 +
drivers/dma/fsldma.c |9 ++---
drivers/dma/fsldma.h |2
From: Hongbo Zhang
This patch updates the discription of each type of DMA controller and its
channels, it is preparation for adding another new DMA controller binding, it
also fixes some defects of indent for text alignment at the same time.
Signed-off-by: Hongbo Zhang
Acked-by: Mark Rutland
From: Hongbo Zhang hongbo.zh...@freescale.com
This patch updates the discription of each type of DMA controller and its
channels, it is preparation for adding another new DMA controller binding, it
also fixes some defects of indent for text alignment at the same time.
Signed-off-by: Hongbo Zhang
From: Hongbo Zhang hongbo.zh...@freescale.com
This patch adds support to 8-channel DMA engine, thus the driver works for both
the new 8-channel and the legacy 4-channel DMA engines.
Signed-off-by: Hongbo Zhang hongbo.zh...@freescale.com
---
drivers/dma/Kconfig |9 +
From: Hongbo Zhang hongbo.zh...@freescale.com
Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this patch adds
the device tree nodes for them.
Signed-off-by: Hongbo Zhang hongbo.zh...@freescale.com
---
.../devicetree/bindings/powerpc/fsl/dma.txt| 67
From: Hongbo Zhang hongbo.zh...@freescale.com
Hi DMA and DT maintainers, please have a look at these V9 patches.
Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this patch set
adds support this DMA engine.
V8-V9 changes:
- add Acked-by: Mark Rutland mark.rutl...@arm.com into
From: Hongbo Zhang
This patch adds support to 8-channel DMA engine, thus the driver works for both
the new 8-channel and the legacy 4-channel DMA engines.
Signed-off-by: Hongbo Zhang
---
drivers/dma/Kconfig |9 +
drivers/dma/fsldma.c |9 ++---
drivers/dma/fsldma.h |2
From: Hongbo Zhang
Hi DMA and DT maintainers, please have a look at these V8 patches.
Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this patch set
adds support this DMA engine.
V7->V8 changes:
- change the word "mapping" to "specifier" for reg and interrupts description
From: Hongbo Zhang
Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this patch adds
the device tree nodes for them.
Signed-off-by: Hongbo Zhang
---
.../devicetree/bindings/powerpc/fsl/dma.txt| 66
arch/powerpc/boot/dts/fsl/b4si-post.dtsi |
From: Hongbo Zhang
This patch updates the discription of each type of DMA controller and its
channels, it is preparation for adding another new DMA controller binding, it
also fixes some defects of indent for text alignment at the same time.
Signed-off-by: Hongbo Zhang
---
From: Hongbo Zhang hongbo.zh...@freescale.com
Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this patch adds
the device tree nodes for them.
Signed-off-by: Hongbo Zhang hongbo.zh...@freescale.com
---
.../devicetree/bindings/powerpc/fsl/dma.txt| 66
From: Hongbo Zhang hongbo.zh...@freescale.com
This patch updates the discription of each type of DMA controller and its
channels, it is preparation for adding another new DMA controller binding, it
also fixes some defects of indent for text alignment at the same time.
Signed-off-by: Hongbo Zhang
From: Hongbo Zhang hongbo.zh...@freescale.com
Hi DMA and DT maintainers, please have a look at these V8 patches.
Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this patch set
adds support this DMA engine.
V7-V8 changes:
- change the word mapping to specifier for reg and
From: Hongbo Zhang hongbo.zh...@freescale.com
This patch adds support to 8-channel DMA engine, thus the driver works for both
the new 8-channel and the legacy 4-channel DMA engines.
Signed-off-by: Hongbo Zhang hongbo.zh...@freescale.com
---
drivers/dma/Kconfig |9 +
From: Hongbo Zhang
This patch adds support to 8-channel DMA engine, thus the driver works for both
the new 8-channel and the legacy 4-channel DMA engines.
Signed-off-by: Hongbo Zhang
---
drivers/dma/Kconfig |9 +
drivers/dma/fsldma.c |9 ++---
drivers/dma/fsldma.h |2
From: Hongbo Zhang
This patch updates the discription of each type of DMA controller and its
channels, it is preparation for adding another new DMA controller binding, it
also fixes some defects of indent for text alignment at the same time.
Signed-off-by: Hongbo Zhang
---
From: Hongbo Zhang
Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this patch adds
the device tree nodes for them.
Signed-off-by: Hongbo Zhang
---
.../devicetree/bindings/powerpc/fsl/dma.txt| 66
arch/powerpc/boot/dts/fsl/b4si-post.dtsi |
From: Hongbo Zhang
Hi Vinod, Dan, Scott and Leo, please have a look at these V7 patches.
Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this patch set
adds support this DMA engine.
V6->V7 changes:
- only remove unnecessary "CHIP-dma" explanations in [1/3]
V5->V6 changes:
-
From: Hongbo Zhang hongbo.zh...@freescale.com
Hi Vinod, Dan, Scott and Leo, please have a look at these V7 patches.
Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this patch set
adds support this DMA engine.
V6-V7 changes:
- only remove unnecessary CHIP-dma explanations in [1/3]
From: Hongbo Zhang hongbo.zh...@freescale.com
Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this patch adds
the device tree nodes for them.
Signed-off-by: Hongbo Zhang hongbo.zh...@freescale.com
---
.../devicetree/bindings/powerpc/fsl/dma.txt| 66
From: Hongbo Zhang hongbo.zh...@freescale.com
This patch updates the discription of each type of DMA controller and its
channels, it is preparation for adding another new DMA controller binding, it
also fixes some defects of indent for text alignment at the same time.
Signed-off-by: Hongbo Zhang
From: Hongbo Zhang hongbo.zh...@freescale.com
This patch adds support to 8-channel DMA engine, thus the driver works for both
the new 8-channel and the legacy 4-channel DMA engines.
Signed-off-by: Hongbo Zhang hongbo.zh...@freescale.com
---
drivers/dma/Kconfig |9 +
From: Hongbo Zhang
Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this patch adds
the device tree nodes for them.
Signed-off-by: Hongbo Zhang
---
.../devicetree/bindings/powerpc/fsl/dma.txt| 66
arch/powerpc/boot/dts/fsl/b4si-post.dtsi |
From: Hongbo Zhang
This patch updates the discription of each type of DMA controller and its
channels, it is preparation for adding another new DMA controller binding, it
also fixes some defects of indent for text alignment at the same time.
Signed-off-by: Hongbo Zhang
---
From: Hongbo Zhang
Hi Vinod, Dan, Scott and Leo, please have a look at these V6 patches.
Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this patch set
adds support this DMA engine.
V5->V6 changes:
- minor updates of descriptions in binding document and Kconfig
- remove [4/4],
From: Hongbo Zhang
This patch adds support to 8-channel DMA engine, thus the driver works for both
the new 8-channel and the legacy 4-channel DMA engines.
Signed-off-by: Hongbo Zhang
---
drivers/dma/Kconfig |9 +
drivers/dma/fsldma.c |9 ++---
drivers/dma/fsldma.h |2
From: Hongbo Zhang hongbo.zh...@freescale.com
This patch adds support to 8-channel DMA engine, thus the driver works for both
the new 8-channel and the legacy 4-channel DMA engines.
Signed-off-by: Hongbo Zhang hongbo.zh...@freescale.com
---
drivers/dma/Kconfig |9 +
From: Hongbo Zhang hongbo.zh...@freescale.com
Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this patch adds
the device tree nodes for them.
Signed-off-by: Hongbo Zhang hongbo.zh...@freescale.com
---
.../devicetree/bindings/powerpc/fsl/dma.txt| 66
From: Hongbo Zhang hongbo.zh...@freescale.com
This patch updates the discription of each type of DMA controller and its
channels, it is preparation for adding another new DMA controller binding, it
also fixes some defects of indent for text alignment at the same time.
Signed-off-by: Hongbo Zhang
From: Hongbo Zhang hongbo.zh...@freescale.com
Hi Vinod, Dan, Scott and Leo, please have a look at these V6 patches.
Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this patch set
adds support this DMA engine.
V5-V6 changes:
- minor updates of descriptions in binding document and
From: Hongbo Zhang
Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this patch add
the device tree nodes for them.
Signed-off-by: Hongbo Zhang
---
.../devicetree/bindings/powerpc/fsl/dma.txt| 66
arch/powerpc/boot/dts/fsl/b4si-post.dtsi |
From: Hongbo Zhang
The variable cookie is initialized in a list_for_each_entry loop, if(unlikely)
the list is empty, this variable will be used uninitialized, so we get a gcc
compiling warning about this. This patch fixes this defect by setting an
initial value to the varialble cookie.
From: Hongbo Zhang
This patch adds support to 8-channel DMA engine, thus the driver works for both
the new 8-channel and the legacy 4-channel DMA engines.
Signed-off-by: Hongbo Zhang
---
drivers/dma/Kconfig |9 +
drivers/dma/fsldma.c |9 ++---
drivers/dma/fsldma.h |2
From: Hongbo Zhang
This patch updates the discription of each type of DMA controller and its
channels, it is preparation for adding another new DMA controller binding, it
also fixes some defects of indent for text alignment at the same time.
Signed-off-by: Hongbo Zhang
---
From: Hongbo Zhang
Hi Vinod, Dan, Scott and Leo, please have a look at these V2 patches.
Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this patch set
adds support this DMA engine.
V4->V5 changes:
- update description in the dt binding document, to make it more resonable
- add
From: Hongbo Zhang hongbo.zh...@freescale.com
Hi Vinod, Dan, Scott and Leo, please have a look at these V2 patches.
Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this patch set
adds support this DMA engine.
V4-V5 changes:
- update description in the dt binding document, to make
From: Hongbo Zhang hongbo.zh...@freescale.com
This patch updates the discription of each type of DMA controller and its
channels, it is preparation for adding another new DMA controller binding, it
also fixes some defects of indent for text alignment at the same time.
Signed-off-by: Hongbo Zhang
From: Hongbo Zhang hongbo.zh...@freescale.com
The variable cookie is initialized in a list_for_each_entry loop, if(unlikely)
the list is empty, this variable will be used uninitialized, so we get a gcc
compiling warning about this. This patch fixes this defect by setting an
initial value to the
From: Hongbo Zhang hongbo.zh...@freescale.com
This patch adds support to 8-channel DMA engine, thus the driver works for both
the new 8-channel and the legacy 4-channel DMA engines.
Signed-off-by: Hongbo Zhang hongbo.zh...@freescale.com
---
drivers/dma/Kconfig |9 +
From: Hongbo Zhang hongbo.zh...@freescale.com
Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this patch add
the device tree nodes for them.
Signed-off-by: Hongbo Zhang hongbo.zh...@freescale.com
---
.../devicetree/bindings/powerpc/fsl/dma.txt| 66
From: Hongbo Zhang
This patch adds support to 8-channel DMA engine, thus the driver works for both
the new 8-channel and the legacy 4-channel DMA engines.
Signed-off-by: Hongbo Zhang
---
drivers/dma/Kconfig |9 +
drivers/dma/fsldma.c |9 ++---
drivers/dma/fsldma.h |2
From: Hongbo Zhang
Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this patch add
the device tree nodes for them.
Signed-off-by: Hongbo Zhang
---
.../devicetree/bindings/powerpc/fsl/dma.txt| 66
arch/powerpc/boot/dts/fsl/b4si-post.dtsi |
From: Hongbo Zhang
This updates the discription of each type of DMA controller and its channels,
it is preparation for adding another new DMA controller binding, also fixes
some defects of indent for text alignment at the same time.
Signed-off-by: Hongbo Zhang
---
From: Hongbo Zhang
Hi Vinod, Dan, Scott and Leo, please have a look at these V2 patches.
Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this patch set
adds support this DMA engine.
V3->V4 changes:
- introduce new patch [1/3] to revise the legacy dma binding document
- and then
From: Hongbo Zhang hongbo.zh...@freescale.com
Hi Vinod, Dan, Scott and Leo, please have a look at these V2 patches.
Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this patch set
adds support this DMA engine.
V3-V4 changes:
- introduce new patch [1/3] to revise the legacy dma
From: Hongbo Zhang hongbo.zh...@freescale.com
This patch adds support to 8-channel DMA engine, thus the driver works for both
the new 8-channel and the legacy 4-channel DMA engines.
Signed-off-by: Hongbo Zhang hongbo.zh...@freescale.com
---
drivers/dma/Kconfig |9 +
From: Hongbo Zhang hongbo.zh...@freescale.com
Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this patch add
the device tree nodes for them.
Signed-off-by: Hongbo Zhang hongbo.zh...@freescale.com
---
.../devicetree/bindings/powerpc/fsl/dma.txt| 66
From: Hongbo Zhang hongbo.zh...@freescale.com
This updates the discription of each type of DMA controller and its channels,
it is preparation for adding another new DMA controller binding, also fixes
some defects of indent for text alignment at the same time.
Signed-off-by: Hongbo Zhang
From: Hongbo Zhang
Hi Vinod, Dan, Leo and Scott, please have a look at these V2 patches.
Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this patch set
adds support this DMA engine.
V2->V3 changes:
- edit Documentation/devicetree/bindings/powerpc/fsl/dma.txt
- edit text string
From: Hongbo Zhang
Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this patch add
the device tree nodes for them.
Signed-off-by: Hongbo Zhang
---
.../devicetree/bindings/powerpc/fsl/dma.txt|8 +-
arch/powerpc/boot/dts/fsl/elo3-dma-0.dtsi | 90
From: Hongbo Zhang
This patch adds support to 8-channel DMA engine, thus the driver works for both
the new 8-channel and the legacy 4-channel DMA engines.
Signed-off-by: Hongbo Zhang
---
drivers/dma/Kconfig |9 +
drivers/dma/fsldma.c |9 ++---
drivers/dma/fsldma.h |2
From: Hongbo Zhang hongbo.zh...@freescale.com
This patch adds support to 8-channel DMA engine, thus the driver works for both
the new 8-channel and the legacy 4-channel DMA engines.
Signed-off-by: Hongbo Zhang hongbo.zh...@freescale.com
---
drivers/dma/Kconfig |9 +
From: Hongbo Zhang hongbo.zh...@freescale.com
Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this patch add
the device tree nodes for them.
Signed-off-by: Hongbo Zhang hongbo.zh...@freescale.com
---
.../devicetree/bindings/powerpc/fsl/dma.txt|8 +-
From: Hongbo Zhang hongbo.zh...@freescale.com
Hi Vinod, Dan, Leo and Scott, please have a look at these V2 patches.
Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this patch set
adds support this DMA engine.
V2-V3 changes:
- edit
From: Hongbo Zhang
Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this patch add
the device tree nodes for them.
Signed-off-by: Hongbo Zhang
---
arch/powerpc/boot/dts/fsl/elo3-dma-0.dtsi | 90 +++
arch/powerpc/boot/dts/fsl/elo3-dma-1.dtsi | 90
From: Hongbo Zhang
Hi Vinod, Dan, Leo and Scott, please have a look at these V2 patches.
Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this patch set
adds support this DMA engine.
V1->v2 changes:
- removed the codes handling the register dgsr1, since it isn't used corrently
-
From: Hongbo Zhang
This patch adds support to 8-channel DMA engine, thus the driver works for both
the new 8-channel and the legacy 4-channel DMA engines.
Signed-off-by: Hongbo Zhang
---
drivers/dma/fsldma.c |5 -
drivers/dma/fsldma.h |2 +-
2 files changed, 5 insertions(+), 2
From: Hongbo Zhang hongbo.zh...@freescale.com
This patch adds support to 8-channel DMA engine, thus the driver works for both
the new 8-channel and the legacy 4-channel DMA engines.
Signed-off-by: Hongbo Zhang hongbo.zh...@freescale.com
---
drivers/dma/fsldma.c |5 -
From: Hongbo Zhang hongbo.zh...@freescale.com
Hi Vinod, Dan, Leo and Scott, please have a look at these V2 patches.
Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this patch set
adds support this DMA engine.
V1-v2 changes:
- removed the codes handling the register dgsr1, since
From: Hongbo Zhang hongbo.zh...@freescale.com
Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this patch add
the device tree nodes for them.
Signed-off-by: Hongbo Zhang hongbo.zh...@freescale.com
---
arch/powerpc/boot/dts/fsl/elo3-dma-0.dtsi | 90 +++
From: Hongbo Zhang
Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this patch add
the device tree nodes for them.
Signed-off-by: Hongbo Zhang
---
arch/powerpc/boot/dts/fsl/qoriq-dma2-0.dtsi | 90 +++
arch/powerpc/boot/dts/fsl/qoriq-dma2-1.dtsi | 90
From: Hongbo Zhang
This patch adds support to 8-channel DMA engine, thus the driver works for both
the new 8-channel and the legacy 4-channel DMA engines.
Signed-off-by: Hongbo Zhang
---
drivers/dma/fsldma.c | 48 ++--
drivers/dma/fsldma.h |4
From: Hongbo Zhang
Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this patch add
the device tree nodes for them.
Signed-off-by: Hongbo Zhang
---
arch/powerpc/boot/dts/fsl/qoriq-dma2-0.dtsi | 90 +++
arch/powerpc/boot/dts/fsl/qoriq-dma2-1.dtsi | 90
From: Hongbo Zhang
This patch adds support to 8-channel DMA engine, thus the driver works for both
the new 8-channel and the legacy 4-channel DMA engines.
Signed-off-by: Hongbo Zhang
---
drivers/dma/fsldma.c | 48 ++--
drivers/dma/fsldma.h |4
From: Hongbo Zhang hongbo.zh...@freescale.com
This patch adds support to 8-channel DMA engine, thus the driver works for both
the new 8-channel and the legacy 4-channel DMA engines.
Signed-off-by: Hongbo Zhang hongbo.zh...@freescale.com
---
drivers/dma/fsldma.c | 48
From: Hongbo Zhang hongbo.zh...@freescale.com
Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this patch add
the device tree nodes for them.
Signed-off-by: Hongbo Zhang hongbo.zh...@freescale.com
---
arch/powerpc/boot/dts/fsl/qoriq-dma2-0.dtsi | 90 +++
From: Hongbo Zhang hongbo.zh...@freescale.com
Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this patch add
the device tree nodes for them.
Signed-off-by: Hongbo Zhang hongbo.zh...@freescale.com
---
arch/powerpc/boot/dts/fsl/qoriq-dma2-0.dtsi | 90 +++
From: Hongbo Zhang hongbo.zh...@freescale.com
This patch adds support to 8-channel DMA engine, thus the driver works for both
the new 8-channel and the legacy 4-channel DMA engines.
Signed-off-by: Hongbo Zhang hongbo.zh...@freescale.com
---
drivers/dma/fsldma.c | 48
From: "hongbo.zhang"
This driver is based on the thermal management framework in thermal_sys.c. A
thermal zone device is created with the trip points to which cooling devices
can be bound, the current cooling device is cpufreq, e.g. CPU frequency is
clipped down to cool the CPU,
From: "hongbo.zhang"
This patch adds device tree properties for ST-Ericsson DB8500 thermal driver,
also adds the platform data to support the old fashion.
Signed-off-by: hongbo.zhang
Reviewed-by: Viresh Kumar
Acked-by: Linus Walleij
---
arch/arm/boot/dts/dbx5x0.dtsi
From: "hongbo.zhang"
V5->V6 Changes:
In patch "Thermal: Add ST-Ericsson DB8500 thermal driver":
- Add depends on ARCH_U8500 in Kconfig
In patch "Thermal: Add ST-Ericsson DB8500 thermal properties and platform
- Add Acked-by: Linus Walleij
hongbo.zhang (2)
From: hongbo.zhang hongbo.zh...@linaro.com
V5-V6 Changes:
In patch Thermal: Add ST-Ericsson DB8500 thermal driver:
- Add depends on ARCH_U8500 in Kconfig
In patch Thermal: Add ST-Ericsson DB8500 thermal properties and platform
- Add Acked-by: Linus Walleij linus.wall...@linaro.org
From: hongbo.zhang hongbo.zh...@linaro.com
This driver is based on the thermal management framework in thermal_sys.c. A
thermal zone device is created with the trip points to which cooling devices
can be bound, the current cooling device is cpufreq, e.g. CPU frequency is
clipped down to cool
From: hongbo.zhang hongbo.zh...@linaro.com
This patch adds device tree properties for ST-Ericsson DB8500 thermal driver,
also adds the platform data to support the old fashion.
Signed-off-by: hongbo.zhang hongbo.zh...@linaro.com
Reviewed-by: Viresh Kumar viresh.ku...@linaro.org
Acked-by: Linus
From: "hongbo.zhang"
This patch adds device tree properties for ST-Ericsson DB8500 thermal driver,
also adds the platform data to support the old fashion.
Signed-off-by: hongbo.zhang
Reviewed-by: Viresh Kumar
---
arch/arm/boot/dts/dbx5x0.dtsi | 14 +
arch/ar
From: "hongbo.zhang"
This driver is based on the thermal management framework in thermal_sys.c. A
thermal zone device is created with the trip points to which cooling devices
can be bound, the current cooling device is cpufreq, e.g. CPU frequency is
clipped down to cool the CPU,
From: "hongbo.zhang"
V4->V5 Changes:
In patch "Thermal: Add ST-Ericsson DB8500 thermal driver":
- use flush_work instead of flush_work_sync since the later is deprecated now.
- parameter trip_points of db8500_thermal_match_cdev is renamed to trip_point;
- re-order
From: hongbo.zhang hongbo.zh...@linaro.com
V4-V5 Changes:
In patch Thermal: Add ST-Ericsson DB8500 thermal driver:
- use flush_work instead of flush_work_sync since the later is deprecated now.
- parameter trip_points of db8500_thermal_match_cdev is renamed to trip_point;
- re-order
From: hongbo.zhang hongbo.zh...@linaro.com
This driver is based on the thermal management framework in thermal_sys.c. A
thermal zone device is created with the trip points to which cooling devices
can be bound, the current cooling device is cpufreq, e.g. CPU frequency is
clipped down to cool
From: hongbo.zhang hongbo.zh...@linaro.com
This patch adds device tree properties for ST-Ericsson DB8500 thermal driver,
also adds the platform data to support the old fashion.
Signed-off-by: hongbo.zhang hongbo.zh...@linaro.com
Reviewed-by: Viresh Kumar viresh.ku...@linaro.org
---
arch/arm
From: "hongbo.zhang"
This patch adds device tree properties for ST-Ericsson DB8500 thermal driver,
also adds the platform data to support the old fashion.
Signed-off-by: hongbo.zhang
Reviewed-by: Viresh Kumar
---
arch/arm/boot/dts/dbx5x0.dtsi | 14 +
arch/ar
From: "hongbo.zhang"
This driver is based on the thermal management framework in thermal_sys.c. A
thermal zone device is created with the trip points to which cooling devices
can be bound, the current cooling device is cpufreq, e.g. CPU frequency is
clipped down to cool the CPU,
From: "hongbo.zhang"
V3->V4 Changes:
1. In previous patch set V3 "Fix thermal bugs and Upstream ST-Ericsson thermal
driver", there were 5 patches in total, since the first 3 for fixing thermal
layer bugs have been accepted by the maintainer, I'd like to send out
From: hongbo.zhang hongbo.zh...@linaro.com
V3-V4 Changes:
1. In previous patch set V3 Fix thermal bugs and Upstream ST-Ericsson thermal
driver, there were 5 patches in total, since the first 3 for fixing thermal
layer bugs have been accepted by the maintainer, I'd like to send out the
updated
From: hongbo.zhang hongbo.zh...@linaro.com
This driver is based on the thermal management framework in thermal_sys.c. A
thermal zone device is created with the trip points to which cooling devices
can be bound, the current cooling device is cpufreq, e.g. CPU frequency is
clipped down to cool
From: hongbo.zhang hongbo.zh...@linaro.com
This patch adds device tree properties for ST-Ericsson DB8500 thermal driver,
also adds the platform data to support the old fashion.
Signed-off-by: hongbo.zhang hongbo.zh...@linaro.com
Reviewed-by: Viresh Kumar viresh.ku...@linaro.org
---
arch/arm
From: "hongbo.zhang"
Problem of using this list is that the cpufreq_get_max_state callback will be
called when register cooling device by thermal_cooling_device_register, but
this list isn't ready at this moment. What's more, there is no need to maintain
such a list,
From: "hongbo.zhang"
This patch adds device tree properties for ST-Ericsson DB8500 thermal driver,
also adds the platform data to support the old fashion.
Signed-off-by: hongbo.zhang
---
arch/arm/boot/dts/dbx5x0.dtsi | 14 +
arch/arm/boot/dts/snowball.dt
From: "hongbo.zhang"
This diver is based on the thermal management framework in thermal_sys.c. A
thermal zone device is created with the trip points to which cooling devices
can be bound, the current cooling device is cpufreq, e.g. CPU frequency is
clipped down to cool the CPU, and oth
From: "hongbo.zhang"
In the while loop for counting cpu frequencies, if table[i].frequency equals
CPUFREQ_ENTRY_INVALID, index i won't be increased, so this leads to an endless
loop, what's more the index i cannot be referred as cpu frequencies number if
there is CPUFREQ_ENTRY_IN
From: "hongbo.zhang"
The curly bracket should be aligned with corresponding if else statements.
Signed-off-by: hongbo.zhang
Reviewed-by: Viresh Kumar
---
drivers/thermal/cpu_cooling.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/thermal/cpu_cooling.c
From: "hongbo.zhang"
V2->V3 Changes:
1. Moved the previous "[PATCH V2 2/6] Thermal: make sure cpufreq cooling
register after cpufreq driver" from generic cpu cooling layer to ST-Ericsson
driver, thus only 5 patches in total in V3 patch set.
2. Update ST-Ericsson therm
101 - 200 of 240 matches
Mail list logo
