Re: [PATCH] ARM: MVEBU: Netgear RN102: Use Hardware BCH ECC

2014-09-05 Thread Ben Peddell
On 06 Sep 2014 at 06:49, Arnaud Ebalard wrote: > FWIW, you can add my: > > Tested-by: Arnaud Ebalard > > Additionally, Ezequiel, would anything prevent pushing the patch to > stable team (nand entry in .dts was added in 3.14): > > Fixes: 92beaccd8b49 ("ARM: mvebu: Enable NAND controller in R

Re: [PATCH] ARM: MVEBU: Netgear RN102: Use Hardware BCH ECC

2014-09-05 Thread Arnaud Ebalard
Hi, Ezequiel Garcia writes: > (Fixing Cc list: dropping devicetree guys, and adding Brian and MTD instead) > > On 05 Sep 04:23 PM, klightsp...@killerwolves.net wrote: >> The bootloader on the Netgear ReadyNAS RN102 uses Hardware BCH ECC >> (strength = 4), while the pxa3xx NAND driver by default

Re: [PATCH] ARM: MVEBU: Netgear RN102: Use Hardware BCH ECC

2014-09-05 Thread Ezequiel Garcia
(Fixing Cc list: dropping devicetree guys, and adding Brian and MTD instead) On 05 Sep 04:23 PM, klightsp...@killerwolves.net wrote: > The bootloader on the Netgear ReadyNAS RN102 uses Hardware BCH ECC > (strength = 4), while the pxa3xx NAND driver by default uses > Hamming ECC (strength = 1). >

[PATCH] ARM: MVEBU: Netgear RN102: Use Hardware BCH ECC

2014-09-04 Thread klightspeed
The bootloader on the Netgear ReadyNAS RN102 uses Hardware BCH ECC (strength = 4), while the pxa3xx NAND driver by default uses Hamming ECC (strength = 1). This patch changes the ECC mode on these machines to match that of the bootloader and of the stock firmware, so that for example updating the