n list:OPEN FIRMWARE AND
> FLATTENED DEVICE TREE BINDINGS ; linux-kernel
> ; moderated list:ARM/FREESCALE IMX / MXC
> ARM ARCHITECTURE ; dl-linux-imx
>
> Subject: Re: [PATCH] ARM: dts: imx7d-sdb: add rev-a board support
>
> Hi Anson,
>
> On Thu, Nov 8, 2018 at 12:30 AM Anson
Hi Anson,
On Thu, Nov 8, 2018 at 12:30 AM Anson Huang wrote:
> Thanks for pointing out this issue, I made a mistake when doing the search in
> git repo..
> So, if we have to assert a GPIO, there is no common way in pinctrl driver?
> Have to
> do it in driver itself? Like this case, we have to
n list:OPEN FIRMWARE AND
> FLATTENED DEVICE TREE BINDINGS ; linux-kernel
> ; moderated list:ARM/FREESCALE IMX / MXC
> ARM ARCHITECTURE ; dl-linux-imx
>
> Subject: Re: [PATCH] ARM: dts: imx7d-sdb: add rev-a board support
>
> Hi Anson,
>
> On Wed, Nov 7, 2018 at 11:24 PM Anson Hu
Hi Anson,
On Wed, Nov 7, 2018 at 11:24 PM Anson Huang wrote:
> Regarding the fec2 settings in imx7d-sdb.dts, originally it uses Rev-A board
> (but some nodes are
> using Rev-B board), in this patch, I clean up all the settings in
> imx7d-sdb.dts using Rev-B board,
> so below is added to imx7d-
n list:OPEN FIRMWARE AND
> FLATTENED DEVICE TREE BINDINGS ; linux-kernel
> ; moderated list:ARM/FREESCALE IMX / MXC
> ARM ARCHITECTURE ; dl-linux-imx
>
> Subject: Re: [PATCH] ARM: dts: imx7d-sdb: add rev-a board support
>
> Hi Anson,
>
> On Wed, Nov 7, 2018 at 3:19 AM Anson Hu
Hi Anson,
On Wed, Nov 7, 2018 at 3:19 AM Anson Huang wrote:
> +&fec2 {
> + pinctrl-0 = <&pinctrl_enet2>;
> + /delete-property/pinctrl-assert-gpios;
"pinctrl-assert-gpios" does not exist in mainline, so not sure why you
are deleting it.
Current imx7d-sdb.dts has some incorrect settings about
Rev-A and Rev-B boards, some of the settings are based on
Rev-A board but some are based on Rev-B board, clean up it
by adding i.MX7D SDB Rev-A board support, make default
imx7d-sdb.dts for Rev-B board as usual, and introduce
imx7d-sdb-reva.dt
7 matches
Mail list logo
