I just posted my proposed non-blocking changes to the i2c driver. This
is the changes for the i801 driver.
This patch modifies the I801 SMBus driver to use the non-blocking
interface.
Signed-off-by: Corey Minyard <[EMAIL PROTECTED]>
Index: linux-2.6.11-rc2/drivers/i2c/busses/i2c-i801.c
===================================================================
--- linux-2.6.11-rc2.orig/drivers/i2c/busses/i2c-i801.c
+++ linux-2.6.11-rc2/drivers/i2c/busses/i2c-i801.c
@@ -40,6 +40,14 @@
/* Note: we assume there can only be one I801, with one SMBus interface */
+/* Another note: This interface is extremely sensitive to timing and
+ failure handling. If you don't wait at least one jiffie after
+ starting the transaction before checking things, you will screw it
+ up. If you don't wait a jiffie after the final check, you will
+ screw it up. If you screw it up by these manners or by abandoning
+ an operation in progress, the I2C bus is likely stuck and won't
+ work any more. Gotta love this hardware. */
+
#include <linux/config.h>
#include <linux/module.h>
#include <linux/pci.h>
@@ -79,7 +87,8 @@
#define SMBHSTCFG_I2C_EN 4
/* Other settings */
-#define MAX_TIMEOUT 100
+#define MAX_TIMEOUT_US 100000
+#define RETRY_TIME_US 500 /* Retry minimum is 500us */
#define ENABLE_INT9 0 /* set to 0x01 to enable - untested */
/* I801 command constants */
@@ -105,21 +114,35 @@
"Forcibly enable the I801 at the given address. "
"EXTREMELY DANGEROUS!");
-static int i801_transaction(void);
-static int i801_block_transaction(union i2c_smbus_data *data,
- char read_write, int command);
-
static unsigned short i801_smba;
static struct pci_dev *I801_dev;
static int isich4;
+struct i801_i2c_data
+{
+ int i;
+ int len;
+ unsigned char hostc;
+ int block;
+ int hwpec;
+ int xact;
+ int hststs;
+ int wait_intr;
+ int finished;
+
+ /* Used to handle removal race conditions. */
+ int in_removal;
+ int in_use;
+};
+struct i801_i2c_data i801_data;
+
static int i801_setup(struct pci_dev *dev)
{
int error_return = 0;
unsigned char temp;
/* Note: we keep on searching until we have found 'function 3' */
- if(PCI_FUNC(dev->devfn) != 3)
+ if (PCI_FUNC(dev->devfn) != 3)
return -ENODEV;
I801_dev = dev;
@@ -136,7 +159,7 @@
} else {
pci_read_config_word(I801_dev, SMBBA, &i801_smba);
i801_smba &= 0xfff0;
- if(i801_smba == 0) {
+ if (i801_smba == 0) {
dev_err(&dev->dev, "SMB base address uninitialized"
"- upgrade BIOS or use force_addr=0xaddr\n");
return -ENODEV;
@@ -180,12 +203,93 @@
return error_return;
}
-static int i801_transaction(void)
+static void i801_check_hststs(struct i2c_adapter *adap,
+ struct i2c_op_q_entry *entry,
+ struct i801_i2c_data *d)
+{
+ if (d->hststs & 0x10) {
+ entry->result = -EIO;
+ dev_dbg(&I801_dev->dev,
+ "Error: Failed bus transaction\n");
+ } else if (d->hststs & 0x08) {
+ entry->result = -EIO;
+ dev_err(&I801_dev->dev, "Bus collision!\n");
+ /* Clock stops and slave is stuck in mid-transmission */
+ } else if (d->hststs & 0x04) {
+ entry->result = -EIO;
+ dev_dbg(&I801_dev->dev, "Error: no response!\n");
+ }
+}
+
+static void i801_finish(struct i2c_adapter *adap,
+ struct i2c_op_q_entry *entry,
+ struct i801_i2c_data *d)
+{
+ d->finished = 1;
+
+#ifdef HAVE_PEC
+ if (isich4 && d->hwpec) {
+ if (entry->smbus.size != I2C_SMBUS_QUICK &&
+ entry->smbus.size != I2C_SMBUS_I2C_BLOCK_DATA)
+ outb_p(0, SMBAUXCTL);
+ }
+#endif
+
+ if (d->block || (entry->result < 0) ||
+ ((entry->smbus.read_write == I2C_SMBUS_WRITE)
+ || (d->xact == I801_QUICK)))
+ return;
+
+ switch (d->xact & 0x7f) {
+ case I801_BYTE: /* Result put in SMBHSTDAT0 */
+ case I801_BYTE_DATA:
+ entry->smbus.data->byte = inb_p(SMBHSTDAT0);
+ break;
+ case I801_WORD_DATA:
+ entry->smbus.data->word = inb_p(SMBHSTDAT0)
+ + (inb_p(SMBHSTDAT1) << 8);
+ break;
+ }
+}
+
+static void i801_transaction_final_check(struct i2c_adapter *adap,
+ struct i2c_op_q_entry *entry,
+ struct i801_i2c_data *d)
{
- int temp;
- int result = 0;
- int timeout = 0;
+ i801_check_hststs(adap, entry, d);
+ if ((inb_p(SMBHSTSTS) & 0x1f) != 0x00)
+ outb_p(inb(SMBHSTSTS), SMBHSTSTS);
+
+ if ((d->hststs = (0x1f & inb_p(SMBHSTSTS))) != 0x00) {
+ dev_dbg(&I801_dev->dev, "Failed reset at end of transaction"
+ "(%02x)\n", d->hststs);
+ }
+ dev_dbg(&I801_dev->dev, "Transaction (post): CNT=%02x, CMD=%02x, "
+ "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),
+ inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
+ inb_p(SMBHSTDAT1));
+}
+
+static void i801_transaction_poll(struct i2c_adapter *adap,
+ struct i2c_op_q_entry *entry,
+ struct i801_i2c_data *d)
+{
+ d->hststs = inb_p(SMBHSTSTS);
+ if (!(d->hststs & 0x01)) {
+ i801_transaction_final_check(adap, entry, d);
+ i801_finish(adap, entry, d);
+ } else if (entry->time_left <= 0) {
+ dev_dbg(&I801_dev->dev, "SMBus Timeout!\n");
+ entry->result = -EIO;
+ i801_transaction_final_check(adap, entry, d);
+ }
+}
+
+static void i801_transaction_start(struct i2c_adapter *adap,
+ struct i2c_op_q_entry *entry,
+ struct i801_i2c_data *d)
+{
dev_dbg(&I801_dev->dev, "Transaction (pre): CNT=%02x, CMD=%02x,"
"ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),
inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
@@ -193,331 +297,368 @@
/* Make sure the SMBus host is ready to start transmitting */
/* 0x1f = Failed, Bus_Err, Dev_Err, Intr, Host_Busy */
- if ((temp = (0x1f & inb_p(SMBHSTSTS))) != 0x00) {
+ if ((d->hststs = (0x1f & inb_p(SMBHSTSTS))) != 0x00) {
dev_dbg(&I801_dev->dev, "SMBus busy (%02x). Resetting... \n",
- temp);
- outb_p(temp, SMBHSTSTS);
- if ((temp = (0x1f & inb_p(SMBHSTSTS))) != 0x00) {
- dev_dbg(&I801_dev->dev, "Failed! (%02x)\n", temp);
- return -1;
+ d->hststs);
+ outb_p(d->hststs, SMBHSTSTS);
+ if ((d->hststs = (0x1f & inb_p(SMBHSTSTS))) != 0x00) {
+ dev_dbg(&I801_dev->dev, "Failed! (%02x)\n", d->hststs);
+ entry->result = -EIO;
+ return;
} else {
dev_dbg(&I801_dev->dev, "Successfull!\n");
}
}
outb_p(inb(SMBHSTCNT) | I801_START, SMBHSTCNT);
+}
- /* We will always wait for a fraction of a second! */
- do {
- msleep(1);
- temp = inb_p(SMBHSTSTS);
- } while ((temp & 0x01) && (timeout++ < MAX_TIMEOUT));
-
- /* If the SMBus is still busy, we give up */
- if (timeout >= MAX_TIMEOUT) {
- dev_dbg(&I801_dev->dev, "SMBus Timeout!\n");
- result = -1;
+static void i801_block_finish(struct i2c_adapter *adap,
+ struct i2c_op_q_entry *entry,
+ struct i801_i2c_data *d)
+{
+ if (entry->smbus.size == I2C_SMBUS_I2C_BLOCK_DATA) {
+ /* restore saved configuration register value */
+ pci_write_config_byte(I801_dev, SMBHSTCFG, d->hostc);
}
- if (temp & 0x10) {
- result = -1;
- dev_dbg(&I801_dev->dev, "Error: Failed bus transaction\n");
- }
+ i801_finish(adap, entry, d);
+}
- if (temp & 0x08) {
- result = -1;
- dev_err(&I801_dev->dev, "Bus collision! SMBus may be locked "
- "until next hard reset. (sorry!)\n");
- /* Clock stops and slave is stuck in mid-transmission */
- }
+static void i801_block_poll_wait_intr(struct i2c_adapter *adap,
+ struct i2c_op_q_entry *entry,
+ struct i801_i2c_data *d)
+{
+#ifdef HAVE_PEC
+ if (entry->result >= 0 &&
+ isich4 &&
+ entry->smbus.size == I2C_SMBUS_BLOCK_DATA_PEC)
+ {
+ /* wait for INTR bit as advised by Intel */
+ d->hststs = inb_p(SMBHSTSTS);
+ if (d->hststs & 0x02) {
+ outb_p(d->hststs, SMBHSTSTS);
+ i801_block_finish(adap, entry, d);
+ } else if (entry->time_left <= 0) {
+ /* Timed out */
+ outb_p(d->hststs, SMBHSTSTS);
+ entry->result = -EIO;
+ dev_dbg(&I801_dev->dev, "PEC Timeout!\n");
+ }
+ } else
+#endif
+ i801_block_finish(adap, entry, d);
+}
- if (temp & 0x04) {
- result = -1;
- dev_dbg(&I801_dev->dev, "Error: no response!\n");
+static void i801_block_next_byte(struct i2c_adapter *adap,
+ struct i2c_op_q_entry *entry,
+ struct i801_i2c_data *d)
+{
+ int smbcmd;
+ unsigned char errmask;
+
+ if (d->i > d->len) {
+ d->wait_intr = 1;
+ entry->time_left = MAX_TIMEOUT_US;
+ i801_block_poll_wait_intr(adap, entry, d);
+ return;
}
- if ((inb_p(SMBHSTSTS) & 0x1f) != 0x00)
- outb_p(inb(SMBHSTSTS), SMBHSTSTS);
+ if (d->i == d->len && entry->smbus.read_write == I2C_SMBUS_READ)
+ smbcmd = I801_BLOCK_LAST;
+ else
+ smbcmd = I801_BLOCK_DATA;
+ outb_p(smbcmd | ENABLE_INT9, SMBHSTCNT);
- if ((temp = (0x1f & inb_p(SMBHSTSTS))) != 0x00) {
- dev_dbg(&I801_dev->dev, "Failed reset at end of transaction"
- "(%02x)\n", temp);
+ dev_dbg(&I801_dev->dev, "Block (pre %d): CNT=%02x, CMD=%02x, "
+ "ADD=%02x, DAT0=%02x, BLKDAT=%02x\n", d->i,
+ inb_p(SMBHSTCNT), inb_p(SMBHSTCMD), inb_p(SMBHSTADD),
+ inb_p(SMBHSTDAT0), inb_p(SMBBLKDAT));
+
+ /* Make sure the SMBus host is ready to start transmitting */
+ d->hststs = inb_p(SMBHSTSTS);
+ if (d->i == 1) {
+ /* Erronenous conditions before transaction:
+ * Byte_Done, Failed, Bus_Err, Dev_Err, Intr, Host_Busy */
+ errmask=0x9f;
+ } else {
+ /* Erronenous conditions during transaction:
+ * Failed, Bus_Err, Dev_Err, Intr */
+ errmask=0x1e;
+ }
+ if (d->hststs & errmask) {
+ dev_dbg(&I801_dev->dev, "SMBus busy (%02x). "
+ "Resetting... \n", d->hststs);
+ outb_p(d->hststs, SMBHSTSTS);
+ if (((d->hststs = inb_p(SMBHSTSTS)) & errmask) != 0x00) {
+ dev_err(&I801_dev->dev,
+ "Reset failed! (%02x)\n", d->hststs);
+ entry->result = -EIO;
+ return;
+ }
+ if (d->i != 1) {
+ /* if die in middle of block transaction, fail */
+ entry->result = -EIO;
+ return;
+ }
}
- dev_dbg(&I801_dev->dev, "Transaction (post): CNT=%02x, CMD=%02x, "
- "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),
- inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
- inb_p(SMBHSTDAT1));
- return result;
+
+ if (d->i == 1)
+ outb_p(inb(SMBHSTCNT) | I801_START, SMBHSTCNT);
}
-/* All-inclusive block transaction function */
-static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
- int command)
+/* Called on timer ticks. This checks the result of the
+ transaction. */
+static void i801_block_poll(struct i2c_adapter *adap,
+ struct i2c_op_q_entry *entry,
+ struct i801_i2c_data *d)
{
- int i, len;
- int smbcmd;
- int temp;
- int result = 0;
- int timeout;
- unsigned char hostc, errmask;
-
- if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
- if (read_write == I2C_SMBUS_WRITE) {
- /* set I2C_EN bit in configuration register */
- pci_read_config_byte(I801_dev, SMBHSTCFG, &hostc);
- pci_write_config_byte(I801_dev, SMBHSTCFG,
- hostc | SMBHSTCFG_I2C_EN);
- } else {
- dev_err(&I801_dev->dev,
- "I2C_SMBUS_I2C_BLOCK_READ not DB!\n");
- return -1;
+ d->hststs = inb_p(SMBHSTSTS);
+ if (!(d->hststs & 0x80)) {
+ /* Not ready yet */
+ if (entry->time_left <= 0) {
+ dev_dbg(&I801_dev->dev, "SMBus Timeout!\n");
+ entry->result = -EIO;
}
+ return;
}
- if (read_write == I2C_SMBUS_WRITE) {
- len = data->block[0];
- if (len < 1)
- len = 1;
- if (len > 32)
- len = 32;
- outb_p(len, SMBHSTDAT0);
- outb_p(data->block[1], SMBBLKDAT);
+ i801_check_hststs(adap, entry, d);
+ if (d->i == 1 && entry->smbus.read_write == I2C_SMBUS_READ) {
+ d->len = inb_p(SMBHSTDAT0);
+ if (d->len < 1)
+ d->len = 1;
+ if (d->len > 32)
+ d->len = 32;
+ entry->smbus.data->block[0] = d->len;
+ }
+
+ /* Retrieve/store value in SMBBLKDAT */
+ if (entry->smbus.read_write == I2C_SMBUS_READ)
+ entry->smbus.data->block[d->i] = inb_p(SMBBLKDAT);
+ if (entry->smbus.read_write == I2C_SMBUS_WRITE && d->i+1 <= d->len)
+ outb_p(entry->smbus.data->block[d->i+1], SMBBLKDAT);
+ if ((d->hststs & 0x9e) != 0x00)
+ outb_p(d->hststs, SMBHSTSTS); /* signals SMBBLKDAT ready */
+
+ if ((d->hststs = (0x1e & inb_p(SMBHSTSTS))) != 0x00) {
+ dev_dbg(&I801_dev->dev,
+ "Bad status (%02x) at end of transaction\n",
+ d->hststs);
+ }
+ dev_dbg(&I801_dev->dev, "Block (post %d): CNT=%02x, CMD=%02x, "
+ "ADD=%02x, DAT0=%02x, BLKDAT=%02x\n", d->i,
+ inb_p(SMBHSTCNT), inb_p(SMBHSTCMD), inb_p(SMBHSTADD),
+ inb_p(SMBHSTDAT0), inb_p(SMBBLKDAT));
+
+ if (entry->result)
+ return;
+
+ (d->i)++;
+ i801_block_next_byte(adap, entry, d);
+}
+
+static void i801_block_start(struct i2c_adapter *adap,
+ struct i2c_op_q_entry *entry,
+ struct i801_i2c_data *d)
+{
+ if (entry->smbus.read_write == I2C_SMBUS_WRITE) {
+ d->len = entry->smbus.data->block[0];
+ if (d->len < 1)
+ d->len = 1;
+ if (d->len > 32)
+ d->len = 32;
+ outb_p(d->len, SMBHSTDAT0);
+ outb_p(entry->smbus.data->block[1], SMBBLKDAT);
} else {
- len = 32; /* max for reads */
+ d->len = 32; /* max for reads */
}
- if(isich4 && command != I2C_SMBUS_I2C_BLOCK_DATA) {
+ if(isich4 && entry->smbus.size != I2C_SMBUS_I2C_BLOCK_DATA) {
/* set 32 byte buffer */
}
- for (i = 1; i <= len; i++) {
- if (i == len && read_write == I2C_SMBUS_READ)
- smbcmd = I801_BLOCK_LAST;
- else
- smbcmd = I801_BLOCK_DATA;
- outb_p(smbcmd | ENABLE_INT9, SMBHSTCNT);
-
- dev_dbg(&I801_dev->dev, "Block (pre %d): CNT=%02x, CMD=%02x, "
- "ADD=%02x, DAT0=%02x, BLKDAT=%02x\n", i,
- inb_p(SMBHSTCNT), inb_p(SMBHSTCMD), inb_p(SMBHSTADD),
- inb_p(SMBHSTDAT0), inb_p(SMBBLKDAT));
-
- /* Make sure the SMBus host is ready to start transmitting */
- temp = inb_p(SMBHSTSTS);
- if (i == 1) {
- /* Erronenous conditions before transaction:
- * Byte_Done, Failed, Bus_Err, Dev_Err, Intr, Host_Busy
*/
- errmask=0x9f;
- } else {
- /* Erronenous conditions during transaction:
- * Failed, Bus_Err, Dev_Err, Intr */
- errmask=0x1e;
- }
- if (temp & errmask) {
- dev_dbg(&I801_dev->dev, "SMBus busy (%02x). "
- "Resetting... \n", temp);
- outb_p(temp, SMBHSTSTS);
- if (((temp = inb_p(SMBHSTSTS)) & errmask) != 0x00) {
- dev_err(&I801_dev->dev,
- "Reset failed! (%02x)\n", temp);
- result = -1;
- goto END;
- }
- if (i != 1) {
- /* if die in middle of block transaction, fail
*/
- result = -1;
- goto END;
- }
- }
+ d->i = 1;
+ i801_block_next_byte(adap, entry, d);
+}
- if (i == 1)
- outb_p(inb(SMBHSTCNT) | I801_START, SMBHSTCNT);
+/* General poll routine. Called periodically by the i2c code. */
+static void i801_poll(struct i2c_adapter *adap,
+ struct i2c_op_q_entry *entry,
+ unsigned int us_since_last_poll)
+{
+ struct i801_i2c_data *d = entry->data;
- /* We will always wait for a fraction of a second! */
- timeout = 0;
- do {
- temp = inb_p(SMBHSTSTS);
- msleep(1);
- }
- while ((!(temp & 0x80))
- && (timeout++ < MAX_TIMEOUT));
+ dev_dbg(&I801_dev->dev, "Poll call for %p %p at %ld\n", adap, entry,
+ jiffies);
- /* If the SMBus is still busy, we give up */
- if (timeout >= MAX_TIMEOUT) {
- result = -1;
- dev_dbg(&I801_dev->dev, "SMBus Timeout!\n");
- }
+ if (!d)
+ /* The entry hasn't been started yet. */
+ return;
- if (temp & 0x10) {
- result = -1;
- dev_dbg(&I801_dev->dev,
- "Error: Failed bus transaction\n");
- } else if (temp & 0x08) {
- result = -1;
- dev_err(&I801_dev->dev, "Bus collision!\n");
- } else if (temp & 0x04) {
- result = -1;
- dev_dbg(&I801_dev->dev, "Error: no response!\n");
- }
+ if (d->finished) {
+ /* We delay an extra poll to keep the hardware happy.
+ Otherwise the hardware is not ready when we start
+ the next operation. */
+ i2c_op_done(adap, entry);
+ d->in_use = 0;
+ return;
+ }
- if (i == 1 && read_write == I2C_SMBUS_READ) {
- len = inb_p(SMBHSTDAT0);
- if (len < 1)
- len = 1;
- if (len > 32)
- len = 32;
- data->block[0] = len;
- }
+ /* Decrement timeout */
+ entry->time_left -= us_since_last_poll;
+
+ /* Wait a jiffie normally. */
+ entry->call_again_us = RETRY_TIME_US;
- /* Retrieve/store value in SMBBLKDAT */
- if (read_write == I2C_SMBUS_READ)
- data->block[i] = inb_p(SMBBLKDAT);
- if (read_write == I2C_SMBUS_WRITE && i+1 <= len)
- outb_p(data->block[i+1], SMBBLKDAT);
- if ((temp & 0x9e) != 0x00)
- outb_p(temp, SMBHSTSTS); /* signals SMBBLKDAT ready */
-
- if ((temp = (0x1e & inb_p(SMBHSTSTS))) != 0x00) {
- dev_dbg(&I801_dev->dev,
- "Bad status (%02x) at end of transaction\n",
- temp);
+ if (d->block) {
+ if (d->wait_intr) {
+ i801_block_poll_wait_intr(adap, entry, d);
+ } else {
+ i801_block_poll(adap, entry, d);
}
- dev_dbg(&I801_dev->dev, "Block (post %d): CNT=%02x, CMD=%02x, "
- "ADD=%02x, DAT0=%02x, BLKDAT=%02x\n", i,
- inb_p(SMBHSTCNT), inb_p(SMBHSTCMD), inb_p(SMBHSTADD),
- inb_p(SMBHSTDAT0), inb_p(SMBBLKDAT));
+ if (entry->result < 0)
+ /* Error, finish the transaction */
+ i801_block_finish(adap, entry, d);
+ } else {
+ i801_transaction_poll(adap, entry, d);
+ if (entry->result < 0)
+ /* Error, finish the transaction */
+ i801_finish(adap, entry, d);
+ }
+}
- if (result < 0)
- goto END;
+/* Start a general SMBUS transaction on the i801. Figure out what
+ kind of transaction it is, set it up, and start it. */
+static void i801_start(struct i2c_adapter *adap,
+ struct i2c_op_q_entry *entry)
+{
+ struct i801_i2c_data *d = adap->algo_data;
+
+ d->in_use = 1;
+ if (d->in_removal) {
+ d->in_use = 0;
+ entry->result = -ENODEV;
+ return;
}
-#ifdef HAVE_PEC
- if(isich4 && command == I2C_SMBUS_BLOCK_DATA_PEC) {
- /* wait for INTR bit as advised by Intel */
- timeout = 0;
- do {
- temp = inb_p(SMBHSTSTS);
- msleep(1);
- } while ((!(temp & 0x02))
- && (timeout++ < MAX_TIMEOUT));
+ dev_dbg(&I801_dev->dev, "start call for %p %p at %ld\n", adap, entry,
+ jiffies);
- if (timeout >= MAX_TIMEOUT) {
- dev_dbg(&I801_dev->dev, "PEC Timeout!\n");
+ if (entry->smbus.size == I2C_SMBUS_I2C_BLOCK_DATA) {
+ if (entry->smbus.read_write == I2C_SMBUS_WRITE) {
+ /* set I2C_EN bit in configuration register */
+ pci_read_config_byte(I801_dev, SMBHSTCFG, &d->hostc);
+ pci_write_config_byte(I801_dev, SMBHSTCFG,
+ d->hostc | SMBHSTCFG_I2C_EN);
+ } else {
+ dev_err(&I801_dev->dev,
+ "I2C_SMBUS_I2C_BLOCK_READ not DB!\n");
+ d->in_use = 0;
+ entry->result = -EINVAL;
+ return;
}
- outb_p(temp, SMBHSTSTS);
}
-#endif
- result = 0;
-END:
- if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
- /* restore saved configuration register value */
- pci_write_config_byte(I801_dev, SMBHSTCFG, hostc);
- }
- return result;
-}
-/* Return -1 on error. */
-static s32 i801_access(struct i2c_adapter * adap, u16 addr,
- unsigned short flags, char read_write, u8 command,
- int size, union i2c_smbus_data * data)
-{
- int hwpec = 0;
- int block = 0;
- int ret, xact = 0;
+ d->block = 0;
+ d->hwpec = 0;
+ d->xact = 0;
+ d->wait_intr = 0;
+ d->finished = 0;
#ifdef HAVE_PEC
- if(isich4)
- hwpec = (flags & I2C_CLIENT_PEC) != 0;
+ if (isich4)
+ d->hwpec = (entry->smbus.flags & I2C_CLIENT_PEC) != 0;
#endif
- switch (size) {
+ switch (entry->smbus.size) {
case I2C_SMBUS_QUICK:
- outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+ outb_p(((entry->smbus.addr & 0x7f) << 1)
+ | (entry->smbus.read_write & 0x01),
SMBHSTADD);
- xact = I801_QUICK;
+ d->xact = I801_QUICK;
break;
case I2C_SMBUS_BYTE:
- outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+ outb_p(((entry->smbus.addr & 0x7f) << 1)
+ | (entry->smbus.read_write & 0x01),
SMBHSTADD);
- if (read_write == I2C_SMBUS_WRITE)
- outb_p(command, SMBHSTCMD);
- xact = I801_BYTE;
+ if (entry->smbus.read_write == I2C_SMBUS_WRITE)
+ outb_p(entry->smbus.command, SMBHSTCMD);
+ d->xact = I801_BYTE;
break;
case I2C_SMBUS_BYTE_DATA:
- outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+ outb_p(((entry->smbus.addr & 0x7f) << 1)
+ | (entry->smbus.read_write & 0x01),
SMBHSTADD);
- outb_p(command, SMBHSTCMD);
- if (read_write == I2C_SMBUS_WRITE)
- outb_p(data->byte, SMBHSTDAT0);
- xact = I801_BYTE_DATA;
+ outb_p(entry->smbus.command, SMBHSTCMD);
+ if (entry->smbus.read_write == I2C_SMBUS_WRITE)
+ outb_p(entry->smbus.data->byte, SMBHSTDAT0);
+ d->xact = I801_BYTE_DATA;
break;
case I2C_SMBUS_WORD_DATA:
- outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+ outb_p(((entry->smbus.addr & 0x7f) << 1)
+ | (entry->smbus.read_write & 0x01),
SMBHSTADD);
- outb_p(command, SMBHSTCMD);
- if (read_write == I2C_SMBUS_WRITE) {
- outb_p(data->word & 0xff, SMBHSTDAT0);
- outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1);
+ outb_p(entry->smbus.command, SMBHSTCMD);
+ if (entry->smbus.read_write == I2C_SMBUS_WRITE) {
+ outb_p(entry->smbus.data->word & 0xff, SMBHSTDAT0);
+ outb_p((entry->smbus.data->word & 0xff00) >> 8,
+ SMBHSTDAT1);
}
- xact = I801_WORD_DATA;
+ d->xact = I801_WORD_DATA;
break;
case I2C_SMBUS_BLOCK_DATA:
case I2C_SMBUS_I2C_BLOCK_DATA:
#ifdef HAVE_PEC
case I2C_SMBUS_BLOCK_DATA_PEC:
- if(hwpec && size == I2C_SMBUS_BLOCK_DATA)
- size = I2C_SMBUS_BLOCK_DATA_PEC;
+ if (d->hwpec && entry->smbus.size == I2C_SMBUS_BLOCK_DATA)
+ entry->smbus.size = I2C_SMBUS_BLOCK_DATA_PEC;
#endif
- outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+ outb_p(((entry->smbus.addr & 0x7f) << 1)
+ | (entry->smbus.read_write & 0x01),
SMBHSTADD);
- outb_p(command, SMBHSTCMD);
- block = 1;
+ outb_p(entry->smbus.command, SMBHSTCMD);
+ d->block = 1;
break;
case I2C_SMBUS_PROC_CALL:
default:
- dev_err(&I801_dev->dev, "Unsupported transaction %d\n", size);
- return -1;
+ dev_err(&I801_dev->dev, "Unsupported transaction %d\n",
+ entry->smbus.size);
+ entry->result = -EINVAL;
+ d->in_use = 0;
+ return;
}
#ifdef HAVE_PEC
- if(isich4 && hwpec) {
- if(size != I2C_SMBUS_QUICK &&
- size != I2C_SMBUS_I2C_BLOCK_DATA)
+ if (isich4 && d->hwpec) {
+ if (entry->smbus.size != I2C_SMBUS_QUICK &&
+ entry->smbus.size != I2C_SMBUS_I2C_BLOCK_DATA)
outb_p(1, SMBAUXCTL); /* enable HW PEC */
}
#endif
- if(block)
- ret = i801_block_transaction(data, read_write, size);
- else {
- outb_p(xact | ENABLE_INT9, SMBHSTCNT);
- ret = i801_transaction();
- }
-
-#ifdef HAVE_PEC
- if(isich4 && hwpec) {
- if(size != I2C_SMBUS_QUICK &&
- size != I2C_SMBUS_I2C_BLOCK_DATA)
- outb_p(0, SMBAUXCTL);
- }
-#endif
-
- if(block)
- return ret;
- if(ret)
- return -1;
- if ((read_write == I2C_SMBUS_WRITE) || (xact == I801_QUICK))
- return 0;
-
- switch (xact & 0x7f) {
- case I801_BYTE: /* Result put in SMBHSTDAT0 */
- case I801_BYTE_DATA:
- data->byte = inb_p(SMBHSTDAT0);
- break;
- case I801_WORD_DATA:
- data->word = inb_p(SMBHSTDAT0) + (inb_p(SMBHSTDAT1) << 8);
- break;
- }
- return 0;
+ if (d->block) {
+ i801_block_start(adap, entry, d);
+ if (entry->result < 0)
+ /* Error, finish the transaction */
+ i801_block_finish(adap, entry, d);
+ } else {
+ outb_p(d->xact | ENABLE_INT9, SMBHSTCNT);
+ i801_transaction_start(adap, entry, d);
+ if (entry->result < 0)
+ /* Error, finish the transaction */
+ i801_finish(adap, entry, d);
+ }
+
+ /* Wait extra long here, we want at least 2 ticks to guarantee
+ we wait >= 1 tick. */
+ entry->call_again_us = (1000000 / HZ) * 2;
+ entry->time_left = MAX_TIMEOUT_US;
+
+ if (d->finished) {
+ i2c_op_done(adap, entry);
+ d->in_use = 0;
+ } else
+ entry->data = d;
}
@@ -537,7 +678,8 @@
static struct i2c_algorithm smbus_algorithm = {
.name = "Non-I2C SMBus adapter",
.id = I2C_ALGO_SMBUS,
- .smbus_xfer = i801_access,
+ .smbus_start = i801_start,
+ .poll = i801_poll,
.functionality = i801_func,
};
@@ -545,6 +687,7 @@
.owner = THIS_MODULE,
.class = I2C_CLASS_HWMON,
.algo = &smbus_algorithm,
+ .algo_data = &i801_data,
.name = "unset",
};
@@ -563,7 +706,8 @@
MODULE_DEVICE_TABLE (pci, i801_ids);
-static int __devinit i801_probe(struct pci_dev *dev, const struct
pci_device_id *id)
+static int __devinit i801_probe(struct pci_dev *dev,
+ const struct pci_device_id *id)
{
if (i801_setup(dev)) {
@@ -582,6 +726,14 @@
static void __devexit i801_remove(struct pci_dev *dev)
{
+ struct i801_i2c_data *d = i801_adapter.algo_data;
+
+ /* Shut down any new requests and wait for any in-progress
+ operations to complete. */
+ d->in_removal = 1;
+ while (d->in_use)
+ mdelay(1);
+
i2c_del_adapter(&i801_adapter);
release_region(i801_smba, (isich4 ? 16 : 8));
}
