Hi - OSB4 isn't marked (EXPERIMENTAL) in drivers/ide/Config.in so it shouldn't be marked so in Configure.help. - PDC202XX driver also supports PDC20265. - new VIA82CXXX driver removed kernel command line option (FIFO setting) and CONFIG_VIA82CXX_TUNING -- Bartlomiej Zolnierkiewicz <[EMAIL PROTECTED]> --- linux-240t11/drivers/ide/Configure.help Sun Nov 19 00:22:49 2000 +++ linux/drivers/ide/Configure.help Tue Nov 21 15:45:16 2000 @@ -868,9 +868,9 @@ This is a driver for the OPTi 82C621 EIDE controller. Please read the comments at the top of drivers/ide/opti621.c. -ServerWorks OSB4 chipset support (EXPERIMENTAL) +ServerWorks OSB4 chipset support CONFIG_BLK_DEV_OSB4 - This driver adds PIO/DMA support for the Serverworks OSB4 chipset + This driver adds PIO/(U)DMA support for the ServerWorks OSB4 chipset. Intel PIIXn chipsets support CONFIG_BLK_DEV_PIIX @@ -898,7 +898,7 @@ If unsure, say N. -PROMISE PDC20246/PDC20262/PDC20267 support +PROMISE PDC20246/PDC20262/PDC20265/PDC20267 support CONFIG_BLK_DEV_PDC202XX Promise Ultra33 or PDC20246 Promise Ultra66 or PDC20262 @@ -972,23 +972,15 @@ VIA82CXXX chipset support CONFIG_BLK_DEV_VIA82CXXX This allows you to to configure your chipset for a better use while - running (U)DMA: it will allow you to enable efficiently the second - channel dma usage, as it may not be set by BIOS. It allows you to - pass a kernel command line at boot time in order to set fifo - config. If no command line is provided, it will try to set fifo + running PIO/(U)DMA, it will allow you to enable efficiently the second + channel dma usage, as it may not be set by BIOS. It will try to set fifo configuration at its best. It will allow you to get information from - /proc/ide/via provided you enabled "proc" support. + /proc/ide/via provided you enabled "/proc file system" support. Please read the comments at the top of drivers/ide/via82cxxx.c If you say Y here, then say Y to "Use DMA by default when available" as well. - - If unsure, say N. - -VIA82CXXX Tuning support (WIP) -CONFIG_VIA82CXXX_TUNING - Please read the comments at the top of drivers/ide/via82cxxx.c If unsure, say N. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] Please read the FAQ at http://www.tux.org/lkml/
