* Tony Lindgren [151201 16:56]:
> * Tony Lindgren [151201 16:42]:
> > * Matthijs van Duin [151201 16:11]:
> > > On 2 December 2015 at 00:38, Tony Lindgren wrote:
> > > > Looks like GPIO softreset status bit on both dm8168 and dm8148
> > > > is broken and only goes high initially. After writing
* Tony Lindgren [151201 16:42]:
> * Matthijs van Duin [151201 16:11]:
> > On 2 December 2015 at 00:38, Tony Lindgren wrote:
> > > Looks like GPIO softreset status bit on both dm8168 and dm8148
> > > is broken and only goes high initially. After writing to sysc
> > > softreset bit, the resetdone
* Matthijs van Duin [151201 16:11]:
> On 2 December 2015 at 00:38, Tony Lindgren wrote:
> > Looks like GPIO softreset status bit on both dm8168 and dm8148
> > is broken and only goes high initially. After writing to sysc
> > softreset bit, the resetdone bit never goes high again.
>
> The
On 2 December 2015 at 00:38, Tony Lindgren wrote:
> Looks like GPIO softreset status bit on both dm8168 and dm8148
> is broken and only goes high initially. After writing to sysc
> softreset bit, the resetdone bit never goes high again.
The resetdone bit works fine, but it needs all clocks
Looks like GPIO softreset status bit on both dm8168 and dm8148
is broken and only goes high initially. After writing to sysc
softreset bit, the resetdone bit never goes high again.
I noticed this as GPIOs are enabled from u-boot at least on t410.
And this can be tested easliy with the following
* Matthijs van Duin [151201 16:11]:
> On 2 December 2015 at 00:38, Tony Lindgren wrote:
> > Looks like GPIO softreset status bit on both dm8168 and dm8148
> > is broken and only goes high initially. After writing to sysc
> > softreset bit, the
Looks like GPIO softreset status bit on both dm8168 and dm8148
is broken and only goes high initially. After writing to sysc
softreset bit, the resetdone bit never goes high again.
I noticed this as GPIOs are enabled from u-boot at least on t410.
And this can be tested easliy with the following
On 2 December 2015 at 00:38, Tony Lindgren wrote:
> Looks like GPIO softreset status bit on both dm8168 and dm8148
> is broken and only goes high initially. After writing to sysc
> softreset bit, the resetdone bit never goes high again.
The resetdone bit works fine, but it
* Tony Lindgren [151201 16:56]:
> * Tony Lindgren [151201 16:42]:
> > * Matthijs van Duin [151201 16:11]:
> > > On 2 December 2015 at 00:38, Tony Lindgren wrote:
> > > > Looks like GPIO softreset status bit on
* Tony Lindgren [151201 16:42]:
> * Matthijs van Duin [151201 16:11]:
> > On 2 December 2015 at 00:38, Tony Lindgren wrote:
> > > Looks like GPIO softreset status bit on both dm8168 and dm8148
> > > is broken and only goes high
10 matches
Mail list logo