Adjust the MAX9286 reverse channel amplitude to support devices which
are not pre-programmed, like the RDACM21 camera module.
The de-serializer starts with a 100mV channel amplitude, and increases
it to 170mV after all remote ends have probed and enabled their
'high-threshold' noise immunity feature.
Signed-off-by: Jacopo Mondi <jacopo+rene...@jmondi.org>
---
drivers/media/i2c/max9286.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/media/i2c/max9286.c b/drivers/media/i2c/max9286.c
index 6852448284ea..992eb15a59be 100644
--- a/drivers/media/i2c/max9286.c
+++ b/drivers/media/i2c/max9286.c
@@ -535,6 +535,11 @@ static int max9286_notify_bound(struct v4l2_async_notifier
*notifier,
* - Disable auto-ack as communication on the control channel are now
* stable.
*/
+ max9286_write(priv, 0x3f, MAX9286_EN_REV_CFG | MAX9286_REV_FLEN(35));
+ max9286_write(priv, 0x3b, MAX9286_REV_TRF(1) | MAX9286_REV_AMP(70) |
+ MAX9286_REV_AMP_X);
+ usleep_range(2000, 2500);
+
max9286_check_config_link(priv, priv->source_mask);
/*
@@ -953,8 +958,7 @@ static int max9286_setup(struct max9286_priv *priv)
* high threshold enabled by the serializer driver.
*/
max9286_write(priv, 0x3f, MAX9286_EN_REV_CFG | MAX9286_REV_FLEN(35));
- max9286_write(priv, 0x3b, MAX9286_REV_TRF(1) | MAX9286_REV_AMP(70) |
- MAX9286_REV_AMP_X);
+ max9286_write(priv, 0x3b, MAX9286_REV_TRF(1) | MAX9286_REV_AMP(100));
usleep_range(2000, 2500);
/*
--
2.28.0
