From: Ludovic Barre <ludovic.ba...@st.com>
This patch adds flash nor on qspi. Each flash is
connected in quad mode and has its own chip select.
Signed-off-by: Ludovic Barre <ludovic.ba...@st.com>
---
arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 45 +++++++++++++++++++++++++++++++
arch/arm/boot/dts/stm32mp157c-ev1.dts | 25 +++++++++++++++++
2 files changed, 70 insertions(+)
diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
index 6f044100..9d4c553 100644
--- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
@@ -146,6 +146,51 @@
gpio-ranges = <&pinctrl 0 160 8>;
};
+ qspi_clk_pins_a: qspi-clk-0 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 10, AF9)>;
/* QSPI_CLK */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <3>;
+ };
+ };
+
+ qspi_bk1_pins_a: qspi-bk1-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('F', 8, AF10)>,
/* QSPI_BK1_IO0 */
+ <STM32_PINMUX('F', 9, AF10)>,
/* QSPI_BK1_IO1 */
+ <STM32_PINMUX('F', 7, AF9)>,
/* QSPI_BK1_IO2 */
+ <STM32_PINMUX('F', 6, AF9)>;
/* QSPI_BK1_IO3 */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <3>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 6, AF10)>;
/* QSPI_BK1_NCS */
+ bias-pull-up;
+ drive-push-pull;
+ slew-rate = <3>;
+ };
+ };
+
+ qspi_bk2_pins_a: qspi-bk2-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('H', 2, AF9)>,
/* QSPI_BK2_IO0 */
+ <STM32_PINMUX('H', 3, AF9)>,
/* QSPI_BK2_IO1 */
+ <STM32_PINMUX('G', 10, AF11)>,
/* QSPI_BK2_IO2 */
+ <STM32_PINMUX('G', 7, AF11)>;
/* QSPI_BK2_IO3 */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <3>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('C', 0, AF10)>;
/* QSPI_BK2_NCS */
+ bias-pull-up;
+ drive-push-pull;
+ slew-rate = <3>;
+ };
+ };
+
uart4_pins_a: uart4@0 {
pins1 {
pinmux = <STM32_PINMUX('G', 11, AF6)>;
/* UART4_TX */
diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts
b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index 57e6dbc..96c2aee 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -19,3 +19,28 @@
serial0 = &uart4;
};
};
+
+&qspi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a &qspi_bk2_pins_a>;
+ reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ flash0: mx66l51235l@0 {
+ reg = <0>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <108000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ flash1: mx66l51235l@1 {
+ reg = <1>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <108000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
--
2.7.4
