Hello,
Le Thu, 27 Aug 2020 17:38:43 +0200,
Maxime Ripard a écrit :
> Hi,
>
> On Wed, Aug 26, 2020 at 10:58:34AM +0200, Kévin L'hôpital wrote:
> > > > + {
> > > > + assigned-clocks = < CLK_CSI_MCLK>;
> > > > + assigned-clock-parents = <>;
> > > > + assigned-clock-rates =
Hi,
On Wed, Aug 26, 2020 at 10:58:34AM +0200, Kévin L'hôpital wrote:
> > > + {
> > > + assigned-clocks = < CLK_CSI_MCLK>;
> > > + assigned-clock-parents = <>;
> > > + assigned-clock-rates = <2400>;
> > > +};
> >
> > Why do you need to use assigned-clocks here?
>
> I could do it in the
Hello,
Le Tue, 25 Aug 2020 16:40:22 +0200,
Maxime Ripard a écrit :
> Hi,
>
> On Fri, Aug 21, 2020 at 04:59:35PM +0200, Kévin L'hôpital wrote:
> > The Bananapi M3 supports a camera module which includes an
> > OV8865 sensor connected via the parallel CSI interface and
> > an OV8865 sensor
Hi,
On Fri, Aug 21, 2020 at 04:59:35PM +0200, Kévin L'hôpital wrote:
> The Bananapi M3 supports a camera module which includes an
> OV8865 sensor connected via the parallel CSI interface and
> an OV8865 sensor connected via MIPI CSI-2.
>
> The I2C2 bus is shared by the two sensors as well as
The Bananapi M3 supports a camera module which includes an
OV8865 sensor connected via the parallel CSI interface and
an OV8865 sensor connected via MIPI CSI-2.
The I2C2 bus is shared by the two sensors as well as active-low
reset signal but each sensor has it own shutdown line.
The I2c address
5 matches
Mail list logo