From: Weihang Li <liweih...@hisilicon.com>
We trigger PF reset when a RAS error of NIC named over_8bd_nfe_err
occurred before. But it is possible that a VF causes that error, it's
reasonable to trigger VF reset instead of PF reset in this case.
This patch add detection of vf_id if a over_8bd_nfe_err occurs, if
vf_id is 0, we trigger PF reset. Otherwise, we will trigger VF reset
on the VF with error.
Signed-off-by: Weihang Li <liweih...@hisilicon.com>
Signed-off-by: Peng Li <lipeng...@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazh...@huawei.com>
---
.../net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h | 17 +++++
.../net/ethernet/hisilicon/hns3/hns3pf/hclge_err.c | 79 ++++++++++++++++++++++
.../net/ethernet/hisilicon/hns3/hns3pf/hclge_err.h | 3 +-
.../net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c | 2 +-
4 files changed, 99 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
index 5e6c749..7d78b5a 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
@@ -180,6 +180,9 @@ enum hclge_opcode_type {
HCLGE_OPC_CFG_COM_TQP_QUEUE = 0x0B20,
HCLGE_OPC_RESET_TQP_QUEUE = 0x0B22,
+ /* PPU commands */
+ HCLGE_OPC_PPU_PF_OTHER_INT_DFX = 0x0B4A,
+
/* TSO command */
HCLGE_OPC_TSO_GENERIC_CONFIG = 0x0C01,
HCLGE_OPC_GRO_GENERIC_CONFIG = 0x0C10,
@@ -980,6 +983,20 @@ struct hclge_get_m7_bd_cmd {
u8 rsv[20];
};
+struct hclge_query_ppu_pf_other_int_dfx_cmd {
+ __le16 over_8bd_no_fe_qid;
+ __le16 over_8bd_no_fe_vf_id;
+ __le16 tso_mss_cmp_min_err_qid;
+ __le16 tso_mss_cmp_min_err_vf_id;
+ __le16 tso_mss_cmp_max_err_qid;
+ __le16 tso_mss_cmp_max_err_vf_id;
+ __le16 tx_rd_fbd_poison_qid;
+ __le16 tx_rd_fbd_poison_vf_id;
+ __le16 rx_rd_fbd_poison_qid;
+ __le16 rx_rd_fbd_poison_vf_id;
+ u8 rsv[4];
+};
+
int hclge_cmd_init(struct hclge_dev *hdev);
static inline void hclge_write_reg(void __iomem *base, u32 reg, u32 value)
{
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.c
b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.c
index 4f2af3d..cb6ed8c 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.c
@@ -1687,6 +1687,81 @@ pci_ers_result_t hclge_handle_hw_ras_error(struct
hnae3_ae_dev *ae_dev)
return PCI_ERS_RESULT_RECOVERED;
}
+/* hclge_query_8bd_info: query information about over_8bd_nfe_err
+ * @hdev: pointer to struct hclge_dev
+ * @vf_id: Index of the virtual function with error
+ * @q_id: Physical index of the queue with error
+ *
+ * This function get specific index of queue and function which causes
+ * over_8bd_nfe_err by using command. If vf_id is 0, it means error is
+ * caused by PF instead of VF.
+ */
+static int hclge_query_over_8bd_err_info(struct hclge_dev *hdev, u16 *vf_id,
+ u16 *q_id)
+{
+ struct hclge_query_ppu_pf_other_int_dfx_cmd *req;
+ struct hclge_desc desc;
+ int ret;
+
+ hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_PPU_PF_OTHER_INT_DFX, true);
+ ret = hclge_cmd_send(&hdev->hw, &desc, 1);
+ if (ret)
+ return ret;
+
+ req = (struct hclge_query_ppu_pf_other_int_dfx_cmd *)desc.data;
+ *vf_id = le16_to_cpu(req->over_8bd_no_fe_vf_id);
+ *q_id = le16_to_cpu(req->over_8bd_no_fe_qid);
+
+ return 0;
+}
+
+/* hclge_handle_over_8bd_err: handle MSI-X error named over_8bd_nfe_err
+ * @hdev: pointer to struct hclge_dev
+ * @reset_requests: reset level that we need to trigger later
+ *
+ * over_8bd_nfe_err is a special MSI-X because it may caused by a VF, in
+ * that case, we need to trigger VF reset. Otherwise, a PF reset is needed.
+ */
+static void hclge_handle_over_8bd_err(struct hclge_dev *hdev,
+ unsigned long *reset_requests)
+{
+ struct device *dev = &hdev->pdev->dev;
+ u16 vf_id;
+ u16 q_id;
+ int ret;
+
+ ret = hclge_query_over_8bd_err_info(hdev, &vf_id, &q_id);
+ if (ret) {
+ dev_err(dev, "fail(%d) to query over_8bd_no_fe info\n",
+ ret);
+ return;
+ }
+
+ dev_warn(dev, "PPU_PF_ABNORMAL_INT_ST over_8bd_no_fe found, vf_id(%d),
queue_id(%d)\n",
+ vf_id, q_id);
+
+ if (vf_id) {
+ if (vf_id >= hdev->num_alloc_vport) {
+ dev_err(dev, "invalid vf id(%d)\n", vf_id);
+ return;
+ }
+
+ /* If we need to trigger other reset whose level is higher
+ * than HNAE3_VF_FUNC_RESET, no need to trigger a VF reset
+ * here.
+ */
+ if (*reset_requests != 0)
+ return;
+
+ ret = hclge_inform_reset_assert_to_vf(&hdev->vport[vf_id]);
+ if (ret)
+ dev_warn(dev, "inform reset to vf(%d) failed %d!\n",
+ hdev->vport->vport_id, ret);
+ } else {
+ set_bit(HNAE3_FUNC_RESET, reset_requests);
+ }
+}
+
int hclge_handle_hw_msix_error(struct hclge_dev *hdev,
unsigned long *reset_requests)
{
@@ -1799,6 +1874,10 @@ int hclge_handle_hw_msix_error(struct hclge_dev *hdev,
set_bit(reset_level, reset_requests);
}
+ status = le32_to_cpu(*desc_data) & HCLGE_PPU_PF_OVER_8BD_ERR_MASK;
+ if (status)
+ hclge_handle_over_8bd_err(hdev, reset_requests);
+
/* clear all PF MSIx errors */
hclge_cmd_reuse_desc(&desc[0], false);
ret = hclge_cmd_send(&hdev->hw, &desc[0], pf_bd_num);
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.h
b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.h
index 6684733..be1186a 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.h
@@ -83,7 +83,8 @@
#define HCLGE_PPU_MPF_INT_ST3_MASK GENMASK(7, 0)
#define HCLGE_PPU_MPF_INT_ST2_MSIX_MASK GENMASK(29, 28)
#define HCLGE_PPU_PF_INT_RAS_MASK 0x18
-#define HCLGE_PPU_PF_INT_MSIX_MASK 0x27
+#define HCLGE_PPU_PF_INT_MSIX_MASK 0x26
+#define HCLGE_PPU_PF_OVER_8BD_ERR_MASK 0x01
#define HCLGE_QCN_FIFO_INT_MASK GENMASK(17, 0)
#define HCLGE_QCN_ECC_INT_MASK GENMASK(21, 0)
#define HCLGE_NCSI_ECC_INT_MASK GENMASK(1, 0)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
index d20f017..2003817 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
@@ -93,7 +93,7 @@ int hclge_inform_reset_assert_to_vf(struct hclge_vport *vport)
else if (hdev->reset_type == HNAE3_FLR_RESET)
reset_type = HNAE3_VF_FULL_RESET;
else
- return -EINVAL;
+ reset_type = HNAE3_VF_FUNC_RESET;
memcpy(&msg_data[0], &reset_type, sizeof(u16));
--
2.7.4
