Rearrange optional stuff in pps_gpio_setup() so it will go after mandatory one
and with reduced indentation. This will increase readability of the sources.

Signed-off-by: Andy Shevchenko <andriy.shevche...@linux.intel.com>
---
 drivers/pps/clients/pps-gpio.c | 33 ++++++++++++++++++---------------
 1 file changed, 18 insertions(+), 15 deletions(-)

diff --git a/drivers/pps/clients/pps-gpio.c b/drivers/pps/clients/pps-gpio.c
index b097da5a659a..35799e6401c9 100644
--- a/drivers/pps/clients/pps-gpio.c
+++ b/drivers/pps/clients/pps-gpio.c
@@ -110,28 +110,31 @@ static int pps_gpio_setup(struct device *dev)
                return dev_err_probe(dev, PTR_ERR(data->gpio_pin),
                                     "failed to request PPS GPIO\n");
 
+       data->assert_falling_edge =
+               device_property_read_bool(dev, "assert-falling-edge");
+
        data->echo_pin = devm_gpiod_get_optional(dev, "echo", GPIOD_OUT_LOW);
        if (IS_ERR(data->echo_pin))
                return dev_err_probe(dev, PTR_ERR(data->echo_pin),
                                     "failed to request ECHO GPIO\n");
 
-       if (data->echo_pin) {
-               ret = device_property_read_u32(dev, "echo-active-ms", &value);
-               if (ret) {
-                       dev_err(dev, "failed to get echo-active-ms from FW\n");
-                       return ret;
-               }
-               data->echo_active_ms = value;
-               /* sanity check on echo_active_ms */
-               if (!data->echo_active_ms || data->echo_active_ms > 999) {
-                       dev_err(dev, "echo-active-ms: %u - bad value from FW\n",
-                               data->echo_active_ms);
-                       return -EINVAL;
-               }
+       if (!data->echo_pin)
+               return 0;
+
+       ret = device_property_read_u32(dev, "echo-active-ms", &value);
+       if (ret) {
+               dev_err(dev, "failed to get echo-active-ms from FW\n");
+               return ret;
        }
 
-       data->assert_falling_edge =
-               device_property_read_bool(dev, "assert-falling-edge");
+       /* sanity check on echo_active_ms */
+       if (!value || value > 999) {
+               dev_err(dev, "echo-active-ms: %u - bad value from FW\n", value);
+               return -EINVAL;
+       }
+
+       data->echo_active_ms = value;
+
        return 0;
 }
 
-- 
2.30.0

Reply via email to