From: Joshua Clayton <stillcompil...@gmail.com>

Previously the onboard hub was made to work by treating its
reset gpio as a regulator enable.
Get rid of that kludge now that pwseq has added reset gpio support
Move pin muxing the hub reset pin into the usbh1 group

Signed-off-by: Joshua Clayton <stillcompil...@gmail.com>
Signed-off-by: Peter Chen <peter.c...@nxp.com>
---
 arch/arm/boot/dts/imx6q-evi.dts | 25 +++++++------------------
 1 file changed, 7 insertions(+), 18 deletions(-)

diff --git a/arch/arm/boot/dts/imx6q-evi.dts b/arch/arm/boot/dts/imx6q-evi.dts
index 7c7c1a8..79a0bd5 100644
--- a/arch/arm/boot/dts/imx6q-evi.dts
+++ b/arch/arm/boot/dts/imx6q-evi.dts
@@ -54,18 +54,6 @@
                reg = <0x10000000 0x40000000>;
        };
 
-       reg_usbh1_vbus: regulator-usbhubreset {
-               compatible = "regulator-fixed";
-               regulator-name = "usbh1_vbus";
-               regulator-min-microvolt = <5000000>;
-               regulator-max-microvolt = <5000000>;
-               enable-active-high;
-               startup-delay-us = <2>;
-               pinctrl-names = "default";
-               pinctrl-0 = <&pinctrl_usbh1_hubreset>;
-               gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
-       };
-
        reg_usb_otg_vbus: regulator-usbotgvbus {
                compatible = "regulator-fixed";
                regulator-name = "usb_otg_vbus";
@@ -207,12 +195,18 @@
 };
 
 &usbh1 {
-       vbus-supply = <&reg_usbh1_vbus>;
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_usbh1>;
        dr_mode = "host";
        disable-over-current;
        status = "okay";
+
+       usb2415host: hub@1 {
+               compatible = "usb424,2513";
+               reg = <1>;
+               reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+               reset-duration-us = <3000>;
+       };
 };
 
 &usbotg {
@@ -468,11 +462,6 @@
                        MX6QDL_PAD_GPIO_3__USB_H1_OC 0x1b0b0
                        /* usbh1_b OC */
                        MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0
-               >;
-       };
-
-       pinctrl_usbh1_hubreset: usbh1hubresetgrp {
-               fsl,pins = <
                        MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0
                >;
        };
-- 
2.7.4

Reply via email to