Re: [PATCH v2] arm: koelsch: make USB0 perform Host/Function switching

2015-07-02 Thread Simon Horman
Hi Phil, when you re-spin this patch could you change the prefix to the following? ARM: shmobile: koelsch: Thanks -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at

RE: [PATCH v2] arm: koelsch: make USB0 perform Host/Function switching

2015-07-02 Thread Phil Edworthy
Hi Sergei. On 02 July 2015 12:32, Sergei wrote: > Hello. > > On 7/2/2015 11:14 AM, Phil Edworthy wrote: > > > Both USB Host (pci0) and Function (USBHS) drivers are enabled. > > The USB PHY driver determines which IP block should be connected > > based on vbus and id signals read via gpios. > >

Re: [PATCH v2] arm: koelsch: make USB0 perform Host/Function switching

2015-07-02 Thread Sergei Shtylyov
Hello. On 7/2/2015 11:14 AM, Phil Edworthy wrote: Both USB Host (pci0) and Function (USBHS) drivers are enabled. The USB PHY driver determines which IP block should be connected based on vbus and id signals read via gpios. Note that switch SW5 and SW6 on Koelsch board needs to be set to

[PATCH v2] arm: koelsch: make USB0 perform Host/Function switching

2015-07-02 Thread Phil Edworthy
Both USB Host (pci0) and Function (USBHS) drivers are enabled. The USB PHY driver determines which IP block should be connected based on vbus and id signals read via gpios. Note that switch SW5 and SW6 on Koelsch board needs to be set to position 3 for this to work. --- Not for upstream until

[PATCH v2] arm: koelsch: make USB0 perform Host/Function switching

2015-07-02 Thread Phil Edworthy
Both USB Host (pci0) and Function (USBHS) drivers are enabled. The USB PHY driver determines which IP block should be connected based on vbus and id signals read via gpios. Note that switch SW5 and SW6 on Koelsch board needs to be set to position 3 for this to work. --- Not for upstream until

Re: [PATCH v2] arm: koelsch: make USB0 perform Host/Function switching

2015-07-02 Thread Sergei Shtylyov
Hello. On 7/2/2015 11:14 AM, Phil Edworthy wrote: Both USB Host (pci0) and Function (USBHS) drivers are enabled. The USB PHY driver determines which IP block should be connected based on vbus and id signals read via gpios. Note that switch SW5 and SW6 on Koelsch board needs to be set to

RE: [PATCH v2] arm: koelsch: make USB0 perform Host/Function switching

2015-07-02 Thread Phil Edworthy
Hi Sergei. On 02 July 2015 12:32, Sergei wrote: Hello. On 7/2/2015 11:14 AM, Phil Edworthy wrote: Both USB Host (pci0) and Function (USBHS) drivers are enabled. The USB PHY driver determines which IP block should be connected based on vbus and id signals read via gpios. Note that

Re: [PATCH v2] arm: koelsch: make USB0 perform Host/Function switching

2015-07-02 Thread Simon Horman
Hi Phil, when you re-spin this patch could you change the prefix to the following? ARM: shmobile: koelsch: Thanks -- To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to majord...@vger.kernel.org More majordomo info at